Re: [Help-gsl] test release for GSL 2.3

[Patrick Alken]

Hello Rob and Max,

  I have tried to fix the issues you reported and uploaded a new test 
release to:

ftp://alpha.gnu.org/gnu/gsl/gsl-2.2.91.tar.gz

Could you check this new version to see if the issues are resolved? I am 
unable to test on windows environments. Regarding the multifit lmsder 
errors, this interface is now deprecated in GSL so you shouldn't worry 
about those errors (I disabled that test entirely in multifit/test.c).

For the spmatrix issues, I changed all the %zu to %u which is hopefully 
more ANSI compliant. I also changed the %lg to %g.

I adjusted the tolerances on the cholesky tests so let me know if there 
is still a warning.

Thanks,
Patrick

On 12/05/2016 05:09 PM, address@hidden wrote:
> -----Original Message----- From: Patrick Alken
> Sent: Tuesday, December 06, 2016 6:33 AM
> To: address@hidden
> Subject: [Help-gsl] test release for GSL 2.3
>
> >  I would like to release the next version of GSL (2.3) due to a few 
> > bug fixes. I have uploaded a test release to:
> >
> > ftp://alpha.gnu.org/gnu/gsl/gsl-2.2.90.tar.gz
> > ftp://alpha.gnu.org/gnu/gsl/gsl-2.2.90.tar.gz.sig
>
> On MS Windows, using (32-bit) gcc version 5.3.0 (i686-posix-sjlj-rev0, 
> Built by MinGW-W64 project):
>
> ###########################################
> =======================================
>   gsl 2.2.90: linalg/test-suite.log
> =======================================
>
> # TOTAL: 1
> # PASS:  0
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  1
> # XPASS: 0
> # ERROR: 0
>
> .. contents:: :depth: 2
>
> FAIL: test
> ==========
>
> FAIL: cholesky_decomp unscaled hilbert rcond: (  7,  7): 
> 1.015027596062922e-009   1.0150275938230001e-009
> (1.015027596062922e-009 observed vs 1.0150275938230001e-009 expected) 
> [272191]
> FAIL: cholesky_decomp unscaled hilbert rcond: (  8,  8): 
> 2.9522220365977099e-011   2.9522216306020002e-011
> (2.9522220365977099e-011 observed vs 2.9522216306020002e-011 expected) 
> [272433]
> FAIL: pcholesky_decomp unscaled random: ( 44, 44)[16,37]: 
> 8.1998296082062446e-006   8.1998296082019806e-006
> (8.1998296082062446e-006 observed vs 8.1998296082019806e-006 expected) 
> [486823]
> FAIL: pcholesky_decomp unscaled random: ( 44, 44)[37,16]: 
> 8.1998296082062446e-006   8.1998296082019806e-006
> (8.1998296082062446e-006 observed vs 8.1998296082019806e-006 expected) 
> [487726]
>
> ###########################################
> ###########################################
>
> =========================================
>   gsl 2.2.90: multifit/test-suite.log
> =========================================
>
> # TOTAL: 1
> # PASS:  0
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  1
> # XPASS: 0
> # ERROR: 0
>
> .. contents:: :depth: 2
>
> FAIL: test
> ==========
>
> FAIL: lmsder/scale=1/linear_rank1 did not converge, status=exceeded 
> max number of iterations [190261]
> FAIL: lmsder/scale=1/weights/linear_rank1 did not converge, 
> status=exceeded max number of iterations [190264]
> FAIL: ridge/lmsder/linear_rank1 did not converge, status=exceeded max 
> number of iterations [190267]
> FAIL: lmsder/scale=10/linear_rank1 did not converge, status=exceeded 
> max number of iterations [190293]
> FAIL: lmsder/scale=10/weights/linear_rank1 did not converge, 
> status=exceeded max number of iterations [190296]
> FAIL: ridge/lmsder/linear_rank1 did not converge, status=exceeded max 
> number of iterations [190299]
> FAIL: lmsder/scale=100/linear_rank1 did not converge, status=exceeded 
> max number of iterations [190325]
> FAIL: lmsder/scale=100/weights/linear_rank1 did not converge, 
> status=exceeded max number of iterations [190328]
> FAIL: ridge/lmsder/linear_rank1 did not converge, status=exceeded max 
> number of iterations [190331]
> FAIL: lmsder/scale=1/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [190363]
> FAIL: lmsder/scale=1/weights/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [190366]
> FAIL: ridge/lmsder/linear_rank1zeros did not converge, status=exceeded 
> max number of iterations [190369]
> FAIL: lmsder/scale=10/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [190405]
> FAIL: lmsder/scale=10/weights/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [190408]
> FAIL: ridge/lmsder/linear_rank1zeros did not converge, status=exceeded 
> max number of iterations [190411]
> FAIL: lmsder/scale=100/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [190447]
> FAIL: lmsder/scale=100/weights/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [190450]
> FAIL: ridge/lmsder/linear_rank1zeros did not converge, status=exceeded 
> max number of iterations [190453]
> FAIL: lmsder/scale=1/linear_rank1 did not converge, status=exceeded 
> max number of iterations [195851]
> FAIL: lmsder/scale=1/weights/linear_rank1 did not converge, 
> status=exceeded max number of iterations [195854]
> FAIL: ridge/lmsder/linear_rank1 did not converge, status=exceeded max 
> number of iterations [195857]
> FAIL: lmsder/scale=10/linear_rank1 did not converge, status=exceeded 
> max number of iterations [195883]
> FAIL: lmsder/scale=10/weights/linear_rank1 did not converge, 
> status=exceeded max number of iterations [195886]
> FAIL: ridge/lmsder/linear_rank1 did not converge, status=exceeded max 
> number of iterations [195889]
> FAIL: lmsder/scale=100/linear_rank1 did not converge, status=exceeded 
> max number of iterations [195915]
> FAIL: lmsder/scale=100/weights/linear_rank1 did not converge, 
> status=exceeded max number of iterations [195918]
> FAIL: ridge/lmsder/linear_rank1 did not converge, status=exceeded max 
> number of iterations [195921]
> FAIL: lmsder/scale=1/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [195953]
> FAIL: lmsder/scale=1/weights/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [195956]
> FAIL: ridge/lmsder/linear_rank1zeros did not converge, status=exceeded 
> max number of iterations [195959]
> FAIL: lmsder/scale=10/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [195995]
> FAIL: lmsder/scale=10/weights/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [195998]
> FAIL: ridge/lmsder/linear_rank1zeros did not converge, status=exceeded 
> max number of iterations [196001]
> FAIL: lmsder/scale=100/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [196037]
> FAIL: lmsder/scale=100/weights/linear_rank1zeros did not converge, 
> status=exceeded max number of iterations [196040]
> FAIL: ridge/lmsder/linear_rank1zeros did not converge, status=exceeded 
> max number of iterations [196043]
> FAIL: lmsder/scale=1/fdiff/nist-hahn1 did not converge, 
> status=exceeded max number of iterations [196269]
> FAIL: lmsder/scale=1/fdiff/weights/nist-hahn1 did not converge, 
> status=exceeded max number of iterations [196285]
> FAIL: lmder/scale=1/fdiff/nist-hahn1 did not converge, status=exceeded 
> max number of iterations [196301]
> FAIL: lmder/scale=1/fdiff/weights/nist-hahn1 did not converge, 
> status=exceeded max number of iterations [196317]
>
> ###########################################
> ###########################################
>
> =========================================
>   gsl 2.2.90: spmatrix/test-suite.log
> =========================================
>
> # TOTAL: 1
> # PASS:  0
> # SKIP:  0
> # XFAIL: 0
> # FAIL:  1
> # XPASS: 0
> # ERROR: 0
>
> .. contents:: :depth: 2
>
> FAIL: test
> ==========
>
> gsl: spio.c:178: ERROR: fscanf failed reading header
> Default GSL error handler invoked.
>
> This application has requested the Runtime to terminate it in an 
> unusual way.
> Please contact the application's support team for more information.
>
> ###########################################
> ###########################################
>
> Using (64-bit) gcc version 5.3.0 (x86_64-posix-sjlj-rev0, Built by 
> MinGW-W64 project) the only failure is the spmatrix test - outputting 
> the same error as above.
>
> Makes no difference to the results whether I configure with 
> '--disable-shared --enable-static' or '--enable-shared --disable-static'.
>
> Cheers,
> Rob