Re: The installer encountered unexpected problem. Please report to

[wisdomlight]

The attached screenshot might be of interest to you:
What you see is the screen of LMint Live USB.
You can see that on the left under Devices there is a 50 GB - which is the same 
amount of GB i allocated a partition yesterday. So might it be the partition I 
created? if it is then this is weird because I aborted the process before I 
finished creating the partition.

There is also n Error message - which i do not understand.
Maybe you will.

I hope this actually helps improve Guix in one way or another.



Sherab

Just like an experience in a dream
Everything I now enjoy
Will become a mere recollection
For what has past will not be seen again

Sent from ProtonMail, encrypted email based in Switzerland.

Sent with ProtonMail Secure Email.

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, January 19, 2020 10:16 PM, <address@hidden> wrote:

> OK Folk here's another one for you[this is not complaining this is for you to 
> see if there is a problem somewhere??]:
>
> I wanted to try Guix again.
>
> This time I wanted it on a Librem 13" [instead of Macbook Air][so i can enjoy 
> the libre wifi]
> I wanted to have Guix installed next to my already installed Linux Mint.
>
> So I created usb live Guix os
> I booted into the usb
> Got to the bit when it asks about Partitioning method choose the Manual, 
> created two partitions
> 1 50.00GB ext4 /
> 70.00GB Free space
>
> When i was about to continue Format disk? it said we are about to format your 
> hard disk. All its data will be lost Do you wish to continue?
> I promptly clicked exit
>
> then the installation menu window appeared and i clicked Abort
>
> it took me to local language window where again i clicked exit
>
> so this cycle of going form one menu to another
> Locale language window -> click exit -> installation menu window -> click 
> Abort -> Local language -> click exit -> locale language menu window->click 
> exit -> abort ad infinitum
>
> so I did the only thing I could and that was switching the machine of form 
> the power button.
>
> Now I want to boot back to my Linux Mint and the system is stuck it says
> Booting from Hard Disk...
>
> And nothing happens
>
> When I then boot again to the live usb stick with Guix on it - the previous 
> partitioning is till there available as if nothing has happened.
>
> This sounds strange to me. And of course now I cannot boot to my machine.
>
> Not good. [not the end of the world as well because i have a back up and 
> another live usb with linux mint on it and it boots fine]
>
> Sherab
>
> Just like an experience in a dream
> Everything I now enjoy
> Will become a mere recollection
> For what has past will not be seen again
>
> Sent from ProtonMail, encrypted email based in Switzerland.
>
> Sent with ProtonMail Secure Email.
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Sunday, 19 January 2020 21:49, address@hidden wrote:
>
> > Hi
> > Sherab
> > Just like an experience in a dream
> > Everything I now enjoy
> > Will become a mere recollection
> > For what has past will not be seen again
> > Sent from ProtonMail, encrypted email based in Switzerland.
> > Sent with ProtonMail Secure Email.
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Sunday, 19 January 2020 21:33, Ludovic Courtès address@hidden wrote:
> >
> > > Hello,
> > > wisdomlight--- via address@hidden skribis:
> > >
> > > > Attached is a photo of my screen.
> > > > I am installing on MacBook Air 13”
> > > > I had guix already installed but wanted a fresh install.
> > > > I used exactly the same usb-image I used before.
> > > > So it’s strange that this is happening.
> > >
> > > What file system type did you select for your partitions?
> >
> > I don't remember but I always choose ext4 for linux install. so i presume 
> > it was ext4
> > Also, what
> >
> > > kind of partitioning did you choose (guided, etc.)?
> >
> > guided whole disk without seprate home folder
> > gpt
> > It asked me to have at least one partition with the / mount and when I put 
> > it it just did not recognize the /
> > I had problem afterwards when needed to recover the MacosX - the recovery 
> > did not recognize the disk.
> > MacOS offers a Disk Utility so i fiddled around with somethings there and 
> > finally managed to make the disk seen and re installed MacOSX
> >
> > > BTW, note that, for Guix System, doing a “fresh install” doesn’t buy you
> > > much in the sense that ‘guix system reconfigure’ amounts to doing a
> > > “fresh install”: the result is the same.
> >
> > Yeah - I got impatient!!!
> >
> > > Thanks for your report!
> >
> > Pleasure
> >
> > > Ludo’.
> >
> > Sherab

Screenshot from 2020-01-20 14-18-39.png
Description: PNG image