[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: core-updates call for testing
From: |
Marius Bakke |
Subject: |
Re: core-updates call for testing |
Date: |
Fri, 24 Apr 2020 18:25:13 +0200 |
User-agent: |
Notmuch/0.29.3 (https://notmuchmail.org) Emacs/26.3 (x86_64-pc-linux-gnu) |
sirgazil <address@hidden> writes:
> ---- On Fri, 24 Apr 2020 03:20:41 +0000 sirgazil <address@hidden> wrote ----
> > ---- On Thu, 23 Apr 2020 23:24:23 +0000 Marius Bakke <address@hidden>
> wrote ----
> > > Hello Guix!
> > >
> > > The "core-updates" branch is ready for testing! According to 'guix
> > > weather', the substitute coverage is slightly better than on "master"
> > > for x86_64. You can get it by running:
> > >
> > > guix pull --branch=core-updates
> > >
> > > Please try upgrading your profiles and systems and file bugs for
> > > anything that does not work for you. GNOME users in particular are
> > > encouraged to try the new GNOME 3.34 and report any regressions.
> >
> > I pulled from core-updates without problems, but "guix upgrade" failed.
> >
> > First, when running "guix upgrade", I got the following message, which I
> think is confusing because I use GNU, not Guix on a foreign distro:
> >
> > $ guix upgrade
> > guile: warning: failed to install locale
> > hint: Consider installing the `glibc-utf8-locales' or `glibc-locales'
> package and defining `GUIX_LOCPATH', along these lines:
> >
> > guix package -i glibc-utf8-locales
> > export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
> >
> > See the "Application Setup" section in the manual, for more info.
> >
> > Then, everything was going alright, until building emacs-guix derivation
> failed:
> >
> > building
> /gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv...
> > \ 'configure' phasebuilder for
> `/gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv' failed
> with exit code 1
> > build of
> /gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv failed
> > View build log at
> '/var/log/guix/drvs/6k/dl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv.bz2'.
> > guix upgrade: error: build of
> `/gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv' failed
> >
> >
> > The build log said:
> >
> > starting phase `configure'
> > source directory:
> "/tmp/guix-build-emacs-guix-0.5.2.drv-0/emacs-guix-0.5.2" (relative from
> build: ".")
> > build directory:
> "/tmp/guix-build-emacs-guix-0.5.2.drv-0/emacs-guix-0.5.2"
> > configure flags:
> ("CONFIG_SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
>
> "SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> "--prefix=/gnu/store/bqplgazij77awh62579p56wbnxdb1c2l-emacs-guix-0.5.2"
> "--enable-fast-install" "--build=x86_64-unknown-linux-gnu")
> > configure: WARNING: unrecognized options: --enable-fast-install
> > checking for a BSD-compatible install...
> /gnu/store/57xj5gcy1jbl9ai2lnrqnpr0dald9i65-coreutils-8.32/bin/install -c
> > checking whether build environment is sane... yes
> > checking for a thread-safe mkdir -p...
> /gnu/store/57xj5gcy1jbl9ai2lnrqnpr0dald9i65-coreutils-8.32/bin/mkdir -p
> > checking for gawk... gawk
> > checking whether make sets $(MAKE)... no
> > checking whether make supports nested variables... yes
> > checking whether make supports nested variables... (cached) yes
> > checking for pkg-config...
> /gnu/store/krpyb0zi700dcrg9cc8932w4v0qivdg9-pkg-config-0.29.2/bin/pkg-config
> > checking pkg-config is at least version 0.9.0... yes
> > configure: checking for guile 2.2
> > configure: checking for guile 2.0
> > configure: error:
> > No Guile development packages were found.
> >
> > Please verify that you have Guile installed. If you installed Guile
> > from a binary distribution, please verify that you have also installed
> > the development packages. If you installed it yourself, you might need
> > to adjust your PKG_CONFIG_PATH; see the pkg-config man page for more.
> >
> > command
> "/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> "./configure"
> "CONFIG_SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
>
> "SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> "--prefix=/gnu/store/bqplgazij77awh62579p56wbnxdb1c2l-emacs-guix-0.5.2"
> "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" failed with status
> 1
> >
> >
>
>
> Then, I decided to remove emacs-guix, and try again to upgrade. This time,
> one of my packages in a custom channel failed with "no code for (term
> ansi-color)" (the package definition:
> https://gitlab.com/sirgazil/guix-channel-x/-/blob/master/sirgazil-x/packages/guile.scm#L13).
> This is not a new package in my profile, I've been using it for a long time.
> Since both error seemed to be related to Guile, I removed all Guile-related
> packages from my profile and tried upgrading again. This time, the upgrade
> succeeded.
Thanks for testing! I fixed the emacs-guix issue in commit
f568581c2bfb3a7367442c9ccc23613c43f6f1e9 plus some related changes in
962554ddcf86675362486a683acd94863ba68d8a and
9b42918edd3f7e9d505c874d3947c0a0815fe551.
> I moved on to reconfiguring the system with "sudo system reconfigure
> my-gnome-config.scm", which failed with the following error:
>
> downloading from
> https://ci.guix.gnu.org/nar/lzip/24yvi2yyknfrpyb7linxd09dkpc560xp-nss-certs-3.50
> ...
> nss-certs-3.50 133KiB
>
> 314KiB/s 00:00 [######## ]
> 48.3%Backtrace:
> 3 (apply-smob/1 #<catch-closure 7fb8bcb391e0>)
> In ice-9/boot-9.scm:
> 705:2 2 (call-with-prompt _ _ #<procedure default-prompt-handle?>)
> In ice-9/eval.scm:
> 619:8 1 (_ #(#(#<directory (guile-user) 7fb8bc7cf140>)))
> In guix/ui.scm:
> 1936:12 0 (run-guix-command _ . _)
>
> guix/ui.scm:1936:12: In procedure run-guix-command:
> Throw to key `encoding-error' with args `("scm_to_stringn" "cannot convert
> wide string to output locale" 84 #f #f)'.
> substitution of /gnu/store/24yvi2yyknfrpyb7linxd09dkpc560xp-nss-certs-3.50
> failed
> killing process 2771
> guix system: error: some substitutes for the outputs of derivation
> `/gnu/store/qnc4hww9jcc3sdd0hqs0n6zsfirf8h5r-nss-certs-3.50.drv' failed
> (usually happens due to networking issues); try `--fallback' to build
> derivation from source
I'm not sure what the problem here is. Can you try adding --fallback to
the upgrade command?
signature.asc
Description: PGP signature
Re: core-updates call for testing, sirgazil, 2020/04/24
Re: core-updates call for testing, Jack Hill, 2020/04/24
Re: core-updates call for testing, Jack Hill, 2020/04/24
Re: core-updates call for testing, Jack Hill, 2020/04/24