[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: core-updates call for testing
From: |
sirgazil |
Subject: |
Re: core-updates call for testing |
Date: |
Fri, 24 Apr 2020 18:08:02 +0000 |
User-agent: |
Zoho Mail |
---- On Fri, 24 Apr 2020 16:25:13 +0000 Marius Bakke <address@hidden> wrote
----
> sirgazil <address@hidden> writes:
>
> > ---- On Fri, 24 Apr 2020 03:20:41 +0000 sirgazil <address@hidden> wrote
> > ----
> > > ---- On Thu, 23 Apr 2020 23:24:23 +0000 Marius Bakke <address@hidden>
> > wrote ----
> > > > Hello Guix!
> > > >
> > > > The "core-updates" branch is ready for testing! According to 'guix
> > > > weather', the substitute coverage is slightly better than on "master"
> > > > for x86_64. You can get it by running:
> > > >
> > > > guix pull --branch=core-updates
> > > >
> > > > Please try upgrading your profiles and systems and file bugs for
> > > > anything that does not work for you. GNOME users in particular are
> > > > encouraged to try the new GNOME 3.34 and report any regressions.
> > >
> > > I pulled from core-updates without problems, but "guix upgrade" failed.
> > >
> > > First, when running "guix upgrade", I got the following message, which
> > I think is confusing because I use GNU, not Guix on a foreign distro:
> > >
> > > $ guix upgrade
> > > guile: warning: failed to install locale
> > > hint: Consider installing the `glibc-utf8-locales' or
> > `glibc-locales' package and defining `GUIX_LOCPATH', along these lines:
> > >
> > > guix package -i glibc-utf8-locales
> > > export GUIX_LOCPATH="$HOME/.guix-profile/lib/locale"
> > >
> > > See the "Application Setup" section in the manual, for more info.
> > >
> > > Then, everything was going alright, until building emacs-guix
> > derivation failed:
> > >
> > > building
> > /gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv...
> > > \ 'configure' phasebuilder for
> > `/gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv' failed
> > with exit code 1
> > > build of
> > /gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv failed
> > > View build log at
> > '/var/log/guix/drvs/6k/dl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv.bz2'.
> > > guix upgrade: error: build of
> > `/gnu/store/6kdl0pyv7i571d6b4vcxskr75ffqw1mk-emacs-guix-0.5.2.drv' failed
> > >
> > >
> > > The build log said:
> > >
> > > starting phase `configure'
> > > source directory:
> > "/tmp/guix-build-emacs-guix-0.5.2.drv-0/emacs-guix-0.5.2" (relative from
> > build: ".")
> > > build directory:
> > "/tmp/guix-build-emacs-guix-0.5.2.drv-0/emacs-guix-0.5.2"
> > > configure flags:
> > ("CONFIG_SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> >
> > "SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> > "--prefix=/gnu/store/bqplgazij77awh62579p56wbnxdb1c2l-emacs-guix-0.5.2"
> > "--enable-fast-install" "--build=x86_64-unknown-linux-gnu")
> > > configure: WARNING: unrecognized options: --enable-fast-install
> > > checking for a BSD-compatible install...
> > /gnu/store/57xj5gcy1jbl9ai2lnrqnpr0dald9i65-coreutils-8.32/bin/install -c
> > > checking whether build environment is sane... yes
> > > checking for a thread-safe mkdir -p...
> > /gnu/store/57xj5gcy1jbl9ai2lnrqnpr0dald9i65-coreutils-8.32/bin/mkdir -p
> > > checking for gawk... gawk
> > > checking whether make sets $(MAKE)... no
> > > checking whether make supports nested variables... yes
> > > checking whether make supports nested variables... (cached) yes
> > > checking for pkg-config...
> > /gnu/store/krpyb0zi700dcrg9cc8932w4v0qivdg9-pkg-config-0.29.2/bin/pkg-config
> > > checking pkg-config is at least version 0.9.0... yes
> > > configure: checking for guile 2.2
> > > configure: checking for guile 2.0
> > > configure: error:
> > > No Guile development packages were found.
> > >
> > > Please verify that you have Guile installed. If you installed Guile
> > > from a binary distribution, please verify that you have also
> > installed
> > > the development packages. If you installed it yourself, you might
> > need
> > > to adjust your PKG_CONFIG_PATH; see the pkg-config man page for
> > more.
> > >
> > > command
> > "/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> > "./configure"
> > "CONFIG_SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> >
> > "SHELL=/gnu/store/pwcp239kjf7lnj5i4lkdzcfcxwcfyk72-bash-minimal-5.0.16/bin/bash"
> > "--prefix=/gnu/store/bqplgazij77awh62579p56wbnxdb1c2l-emacs-guix-0.5.2"
> > "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" failed with
> > status 1
> > >
> > >
> >
> >
> > Then, I decided to remove emacs-guix, and try again to upgrade. This time,
> > one of my packages in a custom channel failed with "no code for (term
> > ansi-color)" (the package definition:
> > https://gitlab.com/sirgazil/guix-channel-x/-/blob/master/sirgazil-x/packages/guile.scm#L13).
> > This is not a new package in my profile, I've been using it for a long
> > time. Since both error seemed to be related to Guile, I removed all
> > Guile-related packages from my profile and tried upgrading again. This
> > time, the upgrade succeeded.
>
> Thanks for testing! I fixed the emacs-guix issue in commit
> f568581c2bfb3a7367442c9ccc23613c43f6f1e9 plus some related changes in
> 962554ddcf86675362486a683acd94863ba68d8a and
> 9b42918edd3f7e9d505c874d3947c0a0815fe551.
It failed again, though: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=40824
Re: core-updates call for testing, sirgazil, 2020/04/24
Re: core-updates call for testing, Jack Hill, 2020/04/24
Re: core-updates call for testing, Jack Hill, 2020/04/24
Re: core-updates call for testing, Jack Hill, 2020/04/24