[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IPv6 does not work
From: |
Thomas Schwinge |
Subject: |
Re: IPv6 does not work |
Date: |
Mon, 1 Dec 2008 00:05:49 +0100 |
User-agent: |
Mutt/1.5.11 |
Hello!
Stefan, help?
On Sun, Nov 30, 2008 at 07:25:48PM +0100, Sjors Gielen wrote:
> I'm quite new to the Hurd. I've set up a Debian GNU/Hurd system and been
> trying to set up IPv6. I ran the commands mentioned on this page:
>
> http://www.gnu.org/software/hurd/hurd/translator/pfinet/ipv6.html
>
> Output of fsysopts /servers/socket/26 is now:
> /hurd/pfinet --interface=eth0 --address=192.168.1.250
> --netmask=255.255.255.0 --gateway=192.168.1.254
> --address6=fe80::c:291e:73db/10 --address6=fe80::20c:29ff:fe1e:73db/10
> --gateway6=::
>
> (eventhough I gave as arguments: -A 2001:610:6d0:babe::3/64 -G
> 2001:610:6d0:babe::1 )
>
> Output of fsysopts /servers/socket/2 is the same as for 26.
You also did pass the ``-4 ...'' and ``-6 ...'' options?
Please post the output of ``showtrans /servers/socket/{2,26}''.
Regards,
Thomas
signature.asc
Description: Digital signature