[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: CVS with SMB/Winbind Authentication

From: Dave Morrow
Subject: RE: CVS with SMB/Winbind Authentication
Date: Tue, 20 Jan 2004 11:41:35 -0500

Been there done that.  All the manual says it requires is, I
have added lines to include winbind

My /etc/pam.d/cvs

auth       required     /lib/security/$ISA/
account    required     /lib/security/$ISA/
auth       required     /lib/security/
account    required     /lib/security/ 

David Morrow
Systems Technical Lead, IT Operations
P: (519) 951-6079
F: (519) 451-6615
mailto: address@hidden
......poor planning on your part does not make an emergency on my

 This message has originated from Autodata Solutions.  The attached material
is the Confidential and Proprietary Information of Autodata Solutions. This
email and any files transmitted with it are confidential and intended solely
for the use of the individual or entity to whom they are addressed. If you
have received this email in error please delete this message and notify the
Autodata system administrator at  address@hidden

-----Original Message-----
From: Steve McIntyre [mailto:address@hidden 
Sent: Tuesday, January 20, 2004 11:18 AM
To: Scott Moynes
Cc: Dave Morrow; 'address@hidden'
Subject: Re: CVS with SMB/Winbind Authentication

On Tue, Jan 20, 2004 at 10:38:55AM -0500, Scott Moynes wrote:
>Dave Morrow wrote:
>>>Hi, I am not sure if this is the appropriate forum to post this 
>>>message, and, if it is not, hopefully someone can point me in the 
>>>right direction, I have been trying to find the generic "users" 
>>>mailing list for CVS
>>>Anyhow, to my question.  I am attempting to use CVS with system 
>>>authentication being handled by Winbind/Samba.  I know that Winbind 
>>>and Samba are functioning correctly since I use this service for other
>>>Is there something special that must be done with CVS to make this 
>There is a pam_winbind module from samba, but I think CVS will only use 
>pam for authentication if run through ssh or rsh tunnels.

No, not at all. PAM support has been added to CVS in the 1.12 series. Check
the docs for how to use it.

Steve McIntyre, Cambridge, UK.
  Getting a SCSI chain working is perfectly simple if you remember that
  must be exactly three terminations: one on one end of the cable, one on
  far end, and the goat, terminated over the SCSI chain with a
  knife whilst burning *black* candles. --- Anthony DeBoer

reply via email to

[Prev in Thread] Current Thread [Next in Thread]