[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

lilypond 1.7.25

From: Han-Wen Nienhuys
Subject: lilypond 1.7.25
Date: Fri, 18 Jul 2003 02:10:55 +0200

LilyPond 1.7.25 is out. It contains, well, a lot. See the ChangeLog below.

I expect that this will be the last "regular" 1.7 release: most of the
bugs are ironed out and the documentation is up to date. After this,
we will release one or two release-candidates for version 1.8.  If you
haven't switched over to 1.7 yet, then this is the time to do it, and
help find bugs before 1.8 goes live.

NOTE: the distribution address has changed from to Please update your bookmarks and mirror scripts.



2003-07-18  Han-Wen Nienhuys  <address@hidden>

        * VERSION: release 1.7.25
        * Documentation/user/introduction.itely (Introduction): rewrite
        start of introduction.

2003-07-18  Juergen Reuter  <address@hidden>

        * lily/ fixed typo

2003-07-18  Heikki Junes  <address@hidden>

        * lilypond-font-lock.el (LilyPond-mode-set-syntax-table, 
        LilyPond-mode-context-set-syntax-table): new functions to define
        the syntax table according to context.

        * lilypond-mode.el: use LilyPond-mode-set-syntax-table.

2003-07-17  Han-Wen Nienhuys  <address@hidden>

        * Documentation/user/refman.itely (Figured bass): 
        language nit courtesy

        * remove no kpathsea hack.

        * Documentation/topdocs/INSTALL.texi (Top): remove web-doc from

        * remove web-doc target.

        * lily/ (find_afm): add message about

        * scm/define-music-properties.scm (figure): use string for 'figure

        * lily/parser.yy (bass_number): allow strings for bassfigure too. 

        * input/regression/ : add raggedright = ##t where applicable. 
        * scm/bass-figure.scm (make-bass-figure-markup): add
        alignBassFigureAccidentals property.

        * lily/ (brew_molecule): only put text on 1st

        * lily/ (set_spacing_rods): new function: take
        syllables widths into account for minimum-length.

        * input/test/ update file

        * input/test/ remove

        * lily/ (LY_DEFINE): add ly: prefix.

        * input/test/ from manual-clef

        * input/test/ move from coda-kludge 

        * input/test/ move to

        * input/test/hara-kiri*, remove
        * input/test/ (efullmusic): remove file (merged

        * make/mutopia-rules.make ($(outdir)/%.pdf): use to
        get scalable cm fonts too.

        * stepmake/stepmake/metafont-rules.make (ENCODINGOPTION): add
        --encoding for mftrace if present.

        * input/regression/ move from test/

        * input/test/: remove simple-slur-endings slur-attachment
        slur-symmetry slur-symmetry

        * scm/drums.scm (set-drum-kit): add function.

        * Documentation/user/refman.itely (Percussion staves): use

        * scripts/ (interpret_finale_key_sig): handle minor keys
        (Global_measure.set_timesig): handle 3/8 time sig too.

        * scm/output-lib.scm (note-head-style->attachment-coordinates):
        note about triangle note heads.

        * scm/drums.scm: use alist for instrument-settings. This fixes the
        bug with assigning to drums in the .ly file.

        * mf/ (code): start font at 32. WARNING: FONT

        * scm/define-grob-interfaces.scm (cluster-beacon-interface): add

        * scm/define-grobs.scm (all-grob-descriptions): default to ramp.

        * scripts/ (FatalConversionError.conv): add cluster rule.

        * ly/ (stopGroup): remove start/stopCluster.

        * lily/ (brew_molecule): examine ClusterSpannerBeacons
        to get positions.

        * lily/ rewrite: catch cluster-note-events,
        make ClusterSpannerBeacon to record Y positions. This removes the
        need to switch off notes. Use \apply #notes-to-clusters { .. }  to
        make cluster-note-events.

2003-07-17  Jan Nieuwenhuizen  <address@hidden>

        * stepmake/aclocal.m4: Do AC_PATH_PROG for python.

        * Use lily/ as identifying source file.

        * lily/ Compile fix: include protected-scm.hh.

        * python/midi.c: Remove <pyphonX>/Python.h ifdef tree.

        * Require PYTHON >= 2.0.

        * stepmake/aclocal.m4 (STEPMAKE_PYTHON_DEVEL): Rewrite.  Ask
          $PYTHON for include dir location.
        (STEPMAKE_PYTHON): New function.  Use
            PYTHON=foo ./configure

          to override.

2003-07-17  Han-Wen Nienhuys  <address@hidden>

        * lily/ (LY_DEFINE): bugfix: always return

        * make/ (Group): change to everywhere.

2003-07-16  Han-Wen Nienhuys  <address@hidden>

        * lily/ (interpret_new_markup): do only if new-markup

        * Documentation/user/refman.itely (Grace notes): note on explicit

2003-07-16  Heikki Junes  <address@hidden>

        * lilypond-font-lock.el: add a comment about LilyPond specific
        escape characters: ^, - and _, in the syntax table.

        * Documentation/user/appendices.itely: a majuscule fix.

2003-07-15  Han-Wen Nienhuys  <address@hidden>

        * input/test/ (endHorizScript): fixes.

        * input/test/ merge in alternate Jazz
        notation, move from regression.

        * input/test/ change name from stacked-scripts

        * input/test/ octave errors.

        * input/no-notation/ move from input/test/, idem
        for midi-volume-equaliser

m2003-07-15  Han-Wen Nienhuys  <address@hidden>

        * scm/output-ps.scm (lily-traced-cm-fonts): substitution for lily
        cm fonts.

        * mf/ don't multiply font_count by 10.

        * lily/ (horizontal_line): new function. Use
        horizontal-line in output backends.

        * Documentation/user/tutorial.itely (An orchestral part): new
        section on orchestral stuff and identifiers.

2003-07-14  Heikki Junes  <address@hidden>

        * lilypond-mode.el: comment-out paren-highlighting, it still causes
        some interference to other modes.

2003-07-14  Han-Wen Nienhuys  <address@hidden>

        * lily/ (musical_column_spacing): use average,
        not maximum of spacing wishes in polyphonic situations.

        * scm/define-grobs.scm (all-grob-descriptions): bold tuplet

        * lilypond-indent.el: remove paren matching. 

        * lily/ (interpret_new_markup): new function
        use iso. text2molecule.

        * lily/ (notice): change FSF address 

        * po/de.po: update PO file to 1.6.

2003-07-13  Heikki Junes  <address@hidden>

        * Documentation/user/ {many}: Add periods and remove spaces.
2003-07-11  Heikki Junes  <address@hidden>

        * lilypond-indent.el (LilyPond-paren-set-mode): From XEmacs' paren.el:
        Disable buffer-locally default paren hook and make a new one. 

        * lilypond-mode.el: Turn off locally paren-mode, but turn on
        locally LilyPond-paren-mode. Add todo for mouse double-click.

2003-07-10  Heikki Junes  <address@hidden>

        * lilypond-indent.el (LilyPond-show-paren-mode): From Emacs' paren.el:
        Disable buffer-locally default paren idle timer and make a new one. 

        * lilypond-mode.el: Turn off locally show-paren-mode, but turn on
        locally LilyPond-show-paren-mode. Add to menu a toggle for

2003-07-08  Han-Wen Nienhuys  <address@hidden>

        * input/template/ (drumNotes): 1.7 fixes 

2003-07-09  Heikki Junes  <address@hidden>

        * Documentation/user/refman.itely: spelling fix.

        * lilypond-mode.el, lilypond-indent.el: restrusture and comment
        paren highlight function definitions. add todo for

2003-07-07  Han-Wen Nienhuys  <address@hidden>

        * input/template/ new file.

2003-07-06  Han-Wen Nienhuys  <address@hidden>

        * mf/ tweak for bottom of flat sign. 
        lo-res fixes.

        * mf/ bugfix in varcoda sign.

        * lily/ (lookup_identifier): return SCM_UNDEFINED,
        in accordance with lexer.ll.   

2003-07-05  Jan Nieuwenhuizen  <address@hidden>

        * Documentation/user/tutorial.itely: Edit introduction.

2003-07-05  Han-Wen Nienhuys  <address@hidden>

        * lily/ (LY_DEFINE): add

2003-07-04  Han-Wen Nienhuys  <address@hidden>

        * scm/to-xml.scm: import srfi-1


Han-Wen Nienhuys   |   address@hidden   | 

reply via email to

[Prev in Thread] Current Thread [Next in Thread]