|
| From: | Jaime Robles |
| Subject: | Re: [KLog-users] KLog-users Digest, Vol 15, Issue 3 |
| Date: | Tue, 26 Jan 2016 21:36:15 +0100 |
You are finding all the bugs and problems! :-)
To get through the initial configuration dialog you just need to:
- Enter a QRZ in the first tab
- Create one log in the log tab
For this you need to click on new and fill the station callsign with the call you will use over the air.
It should be OK if you enter your call in both boxes.
Regarding the type of operation in the log dialog, just select DX, as the rest of the modes are still not fully added... (I will disable those selectors until the functionality is completely implemented.
Could you please try that?
Thanks
In Config Dialog:Clublog tab I pressed OK. This action presented me with a message informing me I'd be redirected to the Log tab to select the kind of log I want. Redirection did not occur.
Next I chose the Log tab and selected New. A window opened with a number of choices, most of them reading N/A. I left these at N/A due to lack of interest and/or because my choices were not there. For example Mode category shows SSB, CW, Mixed, NA. My choice would be CW, RTTY. So I left it N/A.
Selecting OK, I received the same error message as above saying I'd be redirected to the Log tab. I'm already in the Log tab. Nothing was done by choosing OK as above. I assume I have to choose something for all the N/A's - but its just a guess, there is no indication that I've omitted a necessary step.
Filling in some of the N/A's its clear these choices are for contest operation. I will use the log for NON-contest operation. That doesn't seem to be a choice.
Next issue. After changing all the N/A's to something else representative of a DX, Mixed, Single op, Assisted, HP, All Band Classic entry I found the OK button is greyed out with an admonition in red that "Categories not OK". I have no idea what to do about this.
I noted there is a selector box to the right of Bands Category selector. Presumably used to select a single band for single band entry. This selector box is inoperative, does nothing.
I chose Cancel then OK. This took me back to the initial situation of this email. Stuck in a loop with no way to complete Config.
73 Art K6XT~~
Success is going from failure to failure without a loss of enthusiasm.
ARRL LM, CW OPS, GMCC, MHDXA, NAQCC, NCDXF, SDDXC, CDXC
ARRL TA
On 1/26/2016 10:00 AM, address@hidden wrote:
Send KLog-users mailing list submissions to
address@hidden
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.nongnu.org/mailman/listinfo/klog-users
or, via email, send a message with subject or body 'help' to
address@hidden
You can reach the person managing the list at
address@hidden
When replying, please edit your Subject line so it is more specific
than "Re: Contents of KLog-users digest..."
Today's Topics:
1. Re: Show stopper (Jaime Robles)
2. Re: Show stopper (Jaime Robles)
3. Re: Show stopper - SOLVED (Jaime Robles)
----------------------------------------------------------------------
Message: 1
Date: Mon, 25 Jan 2016 18:28:49 +0100
From: Jaime Robles <address@hidden>
To: jason <address@hidden>, address@hidden
Subject: Re: [KLog-users] Show stopper
Message-ID:
<address@hidden>
Content-Type: text/plain; charset="utf-8"
Hello,
It looks like i did nit create the windows properly and you can't access
the db...
Could you please test the previous release?
I will check, however, the package on a clean windows system...
I will keep you informed.
Thanks for the report!
El 25/1/2016 17:05, "k6xt" <address@hidden> escribi?:
Installed klog. After the first-time entries and download of the cty file-------------- next part --------------
an error message pops up.
The message is entitled Database Error and reads "Driver not loaded Driver
not loaded". There's a yellow caution triangle.
This is as far as the install gets. After three left clicks the above
message disappears, replaced with a message reading "Recalculate".
Repeated presses of recalculate do nothing. Pressing the "close this"
Windows red X crashes the program with a Windows advisory the program has
stopped working.
Launching Klog again after the above events repeats them.
Operating conditions: Windows 7 Ultimate 64 bit
Where do I go from here?
--
73 Art K6XT~~
Success is going from failure to failure without a loss of enthusiasm.
ARRL LM, CW OPS, GMCC, MHDXA, NAQCC, NCDXF, SDDXC, CDXC
ARRL TA
An HTML attachment was scrubbed...
URL: <http://lists.nongnu.org/archive/html/klog-users/attachments/20160125/2e6cf257/attachment.html>
------------------------------
Message: 2
Date: Mon, 25 Jan 2016 18:32:08 +0100
From: Jaime Robles <address@hidden>
To: address@hidden, jason <address@hidden>
Subject: Re: [KLog-users] Show stopper
Message-ID:
<CAOinu-_2CskUpjbCAcc3LHD9iEsT-Z5WLGaA2+KB3p6fPEy=address@hidden>
Content-Type: text/plain; charset="utf-8"
Confirmed!
There is a problem with the windows package and the sql driver is not
included!
I will recreate the package and upload it asap...
Thanks for the report!
El 25/1/2016 18:28, "Jaime Robles" <address@hidden> escribi?:
Hello,-------------- next part --------------
It looks like i did nit create the windows properly and you can't access
the db...
Could you please test the previous release?
I will check, however, the package on a clean windows system...
I will keep you informed.
Thanks for the report!
El 25/1/2016 17:05, "k6xt" <address@hidden> escribi?:
Installed klog. After the first-time entries and download of the cty file
an error message pops up.
The message is entitled Database Error and reads "Driver not loaded
Driver not loaded". There's a yellow caution triangle.
This is as far as the install gets. After three left clicks the above
message disappears, replaced with a message reading "Recalculate".
Repeated presses of recalculate do nothing. Pressing the "close this"
Windows red X crashes the program with a Windows advisory the program has
stopped working.
Launching Klog again after the above events repeats them.
Operating conditions: Windows 7 Ultimate 64 bit
Where do I go from here?
--
73 Art K6XT~~
Success is going from failure to failure without a loss of enthusiasm.
ARRL LM, CW OPS, GMCC, MHDXA, NAQCC, NCDXF, SDDXC, CDXC
ARRL TA
An HTML attachment was scrubbed...
URL: <http://lists.nongnu.org/archive/html/klog-users/attachments/20160125/621fdc52/attachment.html>
------------------------------
Message: 3
Date: Mon, 25 Jan 2016 18:48:03 +0100
From: Jaime Robles <address@hidden>
To: address@hidden, jason <address@hidden>
Subject: Re: [KLog-users] Show stopper - SOLVED
Message-ID:
<address@hidden>
Content-Type: text/plain; charset="utf-8"
Solved!
I have just uploaded a new package for the windows SO.
It is called klog-0.9.2.3b-windows-installer.exe
I have removed the faulty one to avoid confusion.
It may take some hours for the mirrors to update.
Please test this new package and report any problem.
Thanks again.
Jaime, EA4TV
El 25/1/2016 18:32, "Jaime Robles" <address@hidden> escribi?:
Confirmed!-------------- next part --------------
There is a problem with the windows package and the sql driver is not
included!
I will recreate the package and upload it asap...
Thanks for the report!
El 25/1/2016 18:28, "Jaime Robles" <address@hidden> escribi?:
Hello,
It looks like i did nit create the windows properly and you can't access
the db...
Could you please test the previous release?
I will check, however, the package on a clean windows system...
I will keep you informed.
Thanks for the report!
El 25/1/2016 17:05, "k6xt" <address@hidden> escribi?:
Installed klog. After the first-time entries and download of the cty
file an error message pops up.
The message is entitled Database Error and reads "Driver not loaded
Driver not loaded". There's a yellow caution triangle.
This is as far as the install gets. After three left clicks the above
message disappears, replaced with a message reading "Recalculate".
Repeated presses of recalculate do nothing. Pressing the "close this"
Windows red X crashes the program with a Windows advisory the program has
stopped working.
Launching Klog again after the above events repeats them.
Operating conditions: Windows 7 Ultimate 64 bit
Where do I go from here?
--
73 Art K6XT~~
Success is going from failure to failure without a loss of enthusiasm.
ARRL LM, CW OPS, GMCC, MHDXA, NAQCC, NCDXF, SDDXC, CDXC
ARRL TA
An HTML attachment was scrubbed...
URL: <http://lists.nongnu.org/archive/html/klog-users/attachments/20160125/627290a3/attachment.html>
------------------------------
_______________________________________________
KLog-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/klog-users
End of KLog-users Digest, Vol 15, Issue 3
*****************************************
| [Prev in Thread] | Current Thread | [Next in Thread] |