tux@slitaz:~$ lspci -k 00:00.0 Class 0600: 1002:5950 00:01.0 Class 0604: 1002:5a3f 00:13.0 Class 0c03: 1002:4374 ohci-pci 00:13.1 Class 0c03: 1002:4375 ohci-pci 00:13.2 Class 0c03: 1002:4373 ehci-pci 00:14.0 Class 0c05: 1002:4372 00:14.1 Class 0101: 1002:4376 pata_atiixp 00:14.3 Class 0601: 1002:4377 00:14.4 Class 0604: 1002:4371 00:14.5 Class 0401: 1002:4370 snd_atiixp 00:14.6 Class 0703: 1002:4378 snd_atiixp_modem 00:18.0 Class 0600: 1022:1100 00:18.1 Class 0600: 1022:1101 00:18.2 Class 0600: 1022:1102 00:18.3 Class 0600: 1022:1103 01:05.0 Class 0300: 1002:5955 radeon 05:00.0 Class 0200: 10ec:8139 8139too 05:02.0 Class 0280: 14e4:4318 b43-pci-bridge 05:09.0 Class 0607: 104c:8031 yenta_cardbus tux@slitaz:~$ dmesg hub 3-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usb-storage i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input1 rtc_cmos 00:01: RTC can wake from S4 rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 rtc_cmos 00:01: alarms up to one month, 114 bytes nvram sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman VUB300 Driver rom wait states = 1C irqpoll timeout = 0400 usbcore: registered new interface driver vub300 usbcore: registered new interface driver ushc sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver TCP: cubic registered NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 33 Key type rxrpc registered Key type rxrpc_s registered RxRPC: Registered security type 2 'rxkad' Key type dns_resolver registered Using IPI No-Shortcut mode registered taskstats version 1 Btrfs loaded rtc_cmos 00:01: setting system clock to 2020-03-06 16:37:48 UTC (1583512668) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC 0-10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TMC0, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TMC0 PQ: 0 ANSI: 5 sda: sda1 sda2 sda3 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 528K (c1771000 - c17f5000) usb 1-2: new high-speed USB device number 3 using ehci-pci usb-storage 1-2:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-2:1.0 usb 2-1: new low-speed USB device number 2 using ohci-pci psmouse serio1: synaptics: Touchpad model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0/0x0, board id: 0, fw id: 32050 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3 input: HID 062a:0000 as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/0003:062A:0000.0001/input/input4 hid-generic 0003:062A:0000.0001: input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:13.0-1/input0 udevd[990]: starting version 182 scsi 2:0:0:0: Direct-Access Generic Mass-Storage 1.11 PQ: 0 ANSI: 2 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdb] 7858176 512-byte logical blocks: (4.02 GB/3.74 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdb] No Caching mode page found sd 2:0:0:0: [sdb] Assuming drive cache: write through Alternate GPT is invalid, using primary GPT. sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input7 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8 ACPI: Power Button [PWRF] wmi: Mapper loaded ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0d/LNXVIDEO:00/input/input9 Linux agpgart interface v0.103 yenta_cardbus 0000:05:09.0: CardBus bridge found [103c:3091] yenta_cardbus 0000:05:09.0: Enabling burst memory read transactions yenta_cardbus 0000:05:09.0: Using CSCINT to route CSC interrupts to PCI yenta_cardbus 0000:05:09.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:05:09.0: TI: mfunc 0x01a01b22, devctl 0x66 random: nonblocking pool is initialized yenta_cardbus 0000:05:09.0: ISA IRQ mask 0x0ce8, PCI irq 17 yenta_cardbus 0000:05:09.0: Socket status: 30000006 pci_bus 0000:05: Raising subordinate bus# of parent bus (#05) from #05 to #09 yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff: excluding 0xa000-0xa0ff 0xa400-0xa4ff [drm] Initialized drm 1.1.0 20060810 0xa800-0xa8ff yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff: excluding 0xc0200000-0xc020ffff yenta_cardbus 0000:05:09.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:05:02.0 snd_atiixp_modem 0000:00:14.6: MC'97 0 converters and GPIO not ready (0x1) pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x370-0x377 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x408-0x40f 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. cfg80211: Calling CRDA to update world regulatory domain b43-phy0: Broadcom 4318 WLAN found (core revision 9) [drm] radeon kernel modesetting enabled. [drm] initializing kernel modesetting (RS480 0x1002:0x5955 0x103C:0x3091). [drm] register mmio base: 0xC0100000 [drm] register mmio size: 65536 [drm] Generation 2 PCI interface, using max accessible memory radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 - 0x000000007FFFFFFF (128M used) radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] Detected VRAM RAM=128M, BAR=128M [drm] RAM width 128bits DDR [TTM] Zone kernel: Available graphics memory: 442338 kiB [TTM] Zone highmem: Available graphics memory: 970182 kiB [TTM] Initializing pool allocator [TTM] Initializing DMA pool allocator [drm] radeon: 128M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] GART: num cpu pages 131072, num gpu pages 131072 b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7 b43-phy0 warning: 5 GHz band is unsupported on this PHY [drm] radeon: power management initialized [drm] radeon: 2 quad pipes, 1 z pipes initialized. [drm] PCIE GART of 512M enabled (table at 0x0000000030080000). b43 ssb0:0: Direct firmware load failed with error -2 b43 ssb0:0: Falling back to user helper Broadcom 43xx driver loaded [ Features: PMNLS ] b43 ssb0:0: Direct firmware load failed with error -2 b43 ssb0:0: Falling back to user helper b43 ssb0:0: Direct firmware load failed with error -2 b43 ssb0:0: Falling back to user helper b43 ssb0:0: Direct firmware load failed with error -2 b43 ssb0:0: Falling back to user helper b43-phy0 ERROR: Firmware file "b43/ucode5.fw" request failed (err=-12) b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" request failed (err=-12) b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. radeon 0000:01:05.0: WB enabled radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0xf7262000 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. radeon 0000:01:05.0: radeon: MSI limited to 32-bit [drm] radeon: irq initialized. [drm] Loading R300 Microcode [drm] radeon: ring at 0x0000000080001000 [drm] ring test succeeded in 1 usecs [drm] ib test succeeded in 0 usecs [drm] Panel ID String: AUO [drm] Panel Size 1280x768 [drm] radeon legacy LVDS backlight initialized [drm] Radeon Display Connectors [drm] Connector 0: [drm] VGA-1 [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68 [drm] Encoders: [drm] CRT1: INTERNAL_DAC2 [drm] Connector 1: [drm] LVDS-1 [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4 [drm] Encoders: [drm] LCD1: INTERNAL_LVDS [drm] Connector 2: [drm] SVIDEO-1 [drm] Encoders: [drm] TV1: INTERNAL_DAC2 [drm] fb mappable at 0xC8040000 [drm] vram apper at 0xC8000000 [drm] size 3932160 [drm] fb depth is 24 [drm] pitch is 5120 fbcon: radeondrmfb (fb0) is primary device Console: switching to colour frame buffer device 160x48 radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device radeon 0000:01:05.0: registered panic notifier [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on minor 0 Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k FS NET: Registered protocol family 10 8139too 0000:05:00.0 eth0: link down IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready tux@slitaz:~$ lsmod Module Size Used by ipv6 213160 13 radeon 1149181 2 b43 314280 0 bcma 23237 1 b43 mac80211 244391 1 b43 cfg80211 152570 2 b43,mac80211 rfkill 10678 1 cfg80211 i2c_algo_bit 3651 1 radeon snd_atiixp 9680 1 snd_atiixp_modem 6997 0 ttm 50866 1 radeon snd_ac97_codec 77690 2 snd_atiixp_modem,snd_atiixp drm_kms_helper 23570 1 radeon snd_pcm 49568 3 snd_ac97_codec,snd_atiixp_modem,snd_atiixp drm 161269 4 ttm,drm_kms_helper,radeon ssb 36919 1 b43 snd_timer 14145 1 snd_pcm snd 35726 7 snd_ac97_codec,snd_timer,snd_pcm,snd_atiixp_modem,snd_atiixp pcmcia 24568 2 b43,ssb yenta_socket 15944 0 soundcore 3150 1 snd ac97_bus 718 1 snd_ac97_codec pcmcia_rsrc 6896 1 yenta_socket pcmcia_core 8339 3 pcmcia,pcmcia_rsrc,yenta_socket hwmon 1825 1 radeon ati_agp 3817 0 agpgart 17579 3 drm,ttm,ati_agp i2c_core 14600 4 drm,drm_kms_helper,i2c_algo_bit,radeon video 10711 0 wmi 5691 0 button 3249 0 tux@slitaz:~$ cat /etc/network.conf # /etc/network.conf: SliTaz system wide networking configuration. # Config file used by: /etc/init.d/network.sh # NETWORK_CONF_VERSION="2" # Set default interface. INTERFACE="eth0" # Dynamic IP address. # Enable/disable DHCP client at boot time. DHCP="yes" # # Settings only for static IP address. # # Enable/disable static IP at boot time. STATIC="no" # Set IP address and netmask for a static IP. IP="192.168.0.6" NETMASK="255.255.255.0" # Set broadcast address BROADCAST="192.168.0.255" # Set route gateway for a static IP. GATEWAY="192.168.0.1" # Set domain name DOMAIN="" # Set DNS server for a static IP. DNS_SERVER="192.168.0.1" # # Wi-Fi settings. # # Enable/disable wireless connection at boot time. WIFI="no" # Set "yes" if you don't want to store networks you're already connected. WIFI_BLANK_NETWORKS="" # # Wi-Fi settings for iwconfig. # # Wi-Fi interface. It can auto-search interface if value below is fail. WIFI_INTERFACE="wlan0" # WPA driver; default is "wext" (Wireless Extension). WIFI_WPA_DRIVER="wext" # Set the operating mode of the device. The mode can be "Ad-Hoc", "Managed", # "Master", "Repeater", "Secondary", "Monitor" or "Auto". WIFI_MODE="managed" # Set the operating channel in the device. Empty by default. WIFI_CHANNEL="" # Force the card to register to the Access Point given by the address, if it's # possible. Empty by default to automatic mode. WIFI_AP="" # # Wi-Fi settings for wpa_supplicant (for given network). # # SSID (network name) WIFI_ESSID="any" # BSSID (optional), use this block to associate with the AP WIFI_BSSID="" # Wi-Fi security. Empty ("") for open network; "ANY" for trying many methods; # "WEP" for WEP; "WPA" for WPA/WPA2-PSK; "EAP" for 802.1x EAP. WIFI_KEY_TYPE="any" # Password for WEP, WPA, EAP, WAPI, and ANY; both in ASCII or HEX form. WIFI_KEY="" # Method for EAP: "PEAP", "TLS", "TTLS", "PWD". WIFI_EAP_METHOD="" # File path to CA certificate file (PEM/DER). WIFI_CA_CERT="" # File path to client certificate file (PEM/DER). WIFI_CLIENT_CERT="" # Identity string for EAP. WIFI_IDENTITY="" # Anonymous identity string for EAP. WIFI_ANONYMOUS_IDENTITY="" # Inner authentication parameters: "", "PAP", "MSCHAP", "MSCHAPV2", "GTC". WIFI_PHASE2="" tux@slitaz:~$ ifconfig eth1 up ifconfig: SIOCGIFFLAGS: No such device tux@slitaz:~$ ifconfig -a dummy0 Link encap:Ethernet HWaddr FA:CA:2C:F4:54:0D BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:C0:9F:D3:6A:3D UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:122 errors:0 dropped:0 overruns:0 frame:0 TX packets:122 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8740 (8.5 KiB) TX bytes:8740 (8.5 KiB) tunl0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) tux@slitaz:~$ iwconfig dummy0 no wireless extensions. lo no wireless extensions. eth0 no wireless extensions. tunl0 no wireless extensions. tux@slitaz:~$ /etc/init.d/network.sh restart Loading network settings from /etc/network.conf Stopping all interfaces ifconfig: SIOCSIFFLAGS: Operation not permitted ifconfig: SIOCGIFFLAGS: No such device Killing all daemons killall: can't kill pid 1647: Operation not permitted wlan0 No such device ifconfig: SIOCSIFFLAGS: Operation not permitted Cannot parse integer value '-i' for -r ifconfig: SIOCSIFFLAGS: Operation not permitted Starting udhcpc client on: eth0... udhcpc: socket: Operation not permitted tux@slitaz:~$ ifconfig -a dummy0 Link encap:Ethernet HWaddr FA:CA:2C:F4:54:0D BROADCAST NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:C0:9F:D3:6A:3D UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:130 errors:0 dropped:0 overruns:0 frame:0 TX packets:130 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:9316 (9.0 KiB) TX bytes:9316 (9.0 KiB) tunl0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) tux@slitaz:~$ uname -a Linux slitaz 3.16.55-slitaz #4 SMP Mon Jan 13 14:24:36 CET 2020 i686 GNU/Linux