[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
HEAD: testsuite update
From: |
Ralf Wildenhues |
Subject: |
HEAD: testsuite update |
Date: |
Wed, 9 Nov 2005 00:18:01 +0100 |
User-agent: |
Mutt/1.5.9i |
OK to apply this bunch of testsuite trivia (as one patch maybe)?
Rationale, where applicable (and one question):
- tst_aclocaldir is used in addition to _lt_pkgdatadir, so we don't
interfere with the setting for the libtoolize script.
- The use of AC_LIBTOOL_DLOPEN is a workaround: without it, the tests
fail on AIX (tested without -brtl). Fixing that is not too important,
I guess; real-world would always use it.
- The AIX linker barfs upon creation of a module without any exported
symbols. Not very likely to happen in real-life. :)
- I needed an AT_TESTED emulation that does not fail. This one XFAILs
for the autotools used, rather than SKIPs -- should I change that?
With this in place, and the aforementioned lt~obsolete.m4 workaround in
place, for the automake-1.7 installed on an AIX system, and no -brtl, I
get one failure (test 12; due to broken gcj installation) and three
skips (subproject tests, due to newer automake needed). No changes in
the old testsuite (mdemo-exec failures for non-brtl but not for brtl).
There are probably more bits coming later..
Cheers,
Ralf
* tests/deplibs-ident.at [ aix ]: No unexpected failure here.
* Makefile.am (BUILDCHECK_ENVIRONMENT, INSTALLCHECK_ENVIRONMENT)
Pass tst_aclocaldir for installcheck.
* tests/libtoolize.at: Use it.
* tests/libtoolize.at: Fix for distcheck (readonly sources).
* tests/nonrecursive.at: Set foo_la_SOURCES, for automake-1.7.
* tests/nonrecursive.at, tests/recursive.at, tests/subproject.at
(foo.c): Actually export a symbol, for AIX.
* tests/old-m4-iface.at: Use AC_LIBTOOL_DLOPEN, for AIX.
* tests/subproject.at: Require automake-1.9, we use indirect
subdirs.
* tests/testsuite.at (LT_AT_AUTOMAKE): Skip if we detect failure
due to old version.
(PREPARE_TESTS): Set autotool variables to `no' if not present.
(LT_AT_ACLOCAL, LT_AT_AUTOCONF, LT_AT_AUTOMAKE)
(LT_AT_AUTOHEADER, LT_AT_AUTORECONF): Use to XFAIL tests.
Reported by Tim Rice <address@hidden>.
(LT_AT_MAKE): Do not use `make -e'.
(_LTDL_PROJECT_FILES): Adjust sub-make call.
Reported by Charles Wilson <address@hidden>.
Index: tests/deplibs-ident.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/deplibs-ident.at,v
retrieving revision 1.1
diff -u -r1.1 deplibs-ident.at
--- tests/deplibs-ident.at 30 Sep 2005 16:00:23 -0000 1.1
+++ tests/deplibs-ident.at 8 Nov 2005 22:03:48 -0000
@@ -58,7 +58,8 @@
AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o b b.$OBJEXT
../liba1.la ../liba2.la ../liba3.la ../../c/libcee.la -rpath /nowhere],
[0],[stdout],[ignore])
AT_CHECK([$EGREP 'cee.*cee' stdout], 1, [ignore], [ignore])
- AT_XFAIL_IF(:) dnl This is currently broken in libtool
+ AT_XFAIL_IF([case $host_os in aix*) false;; *):;; esac])
+ dnl This is currently broken in libtool
)
AT_CLEANUP
Index: Makefile.am
===================================================================
RCS file: /cvsroot/libtool/libtool/Makefile.am,v
retrieving revision 1.177
diff -u -r1.177 Makefile.am
--- Makefile.am 7 Nov 2005 14:16:14 -0000 1.177
+++ Makefile.am 8 Nov 2005 22:03:43 -0000
@@ -387,11 +387,14 @@
FC="$(FC)" FCFLAGS="$(FCFLAGS)" \
GCJ="$(GCJ)" GCJFLAGS="$(GCJFLAGS)"
-BUILDCHECK_ENVIRONMENT = _lt_pkgdatadir="$(abs_top_srcdir)" \
+BUILDCHECK_ENVIRONMENT = \
+ _lt_pkgdatadir="$(abs_top_srcdir)" \
+ tst_aclocaldir="$(abs_top_srcdir)/$(m4dir)" \
LIBTOOLIZE="$(abs_top_builddir)/libtoolize" \
LIBTOOL="$(abs_top_builddir)/libtool"
INSTALLCHECK_ENVIRONMENT = \
+ tst_aclocaldir="$(aclocaldir)" \
LIBTOOLIZE="$(bindir)/`echo libtoolize | sed
'$(program_transform_name)'`" \
LIBTOOL="$(bindir)/`echo libtool | sed '$(program_transform_name)'`"
Index: tests/libtoolize.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/libtoolize.at,v
retrieving revision 1.5
diff -u -r1.5 libtoolize.at
--- tests/libtoolize.at 1 Nov 2005 14:28:20 -0000 1.5
+++ tests/libtoolize.at 8 Nov 2005 22:03:48 -0000
@@ -38,6 +38,8 @@
test -d m4 || { rm -f m4 && mkdir m4; }
+rm -f m4/libtool.m4 m4/ltoptions.m4 config/ltmain.sh
+
# This file should be upgraded.
AT_DATA([m4/libtool.m4], [[
# serial 25 LT_INIT
@@ -369,10 +371,10 @@
libtoolize: putting files in AC_CONFIG_AUX_DIR, \`config'.
libtoolize: copying file \`config/ltmain.sh'
libtoolize: You should add the contents of the following files to
\`aclocal.m4':
-libtoolize: \`$_lt_pkgdatadir/libltdl/m4/libtool.m4'
-libtoolize: \`$_lt_pkgdatadir/libltdl/m4/ltoptions.m4'
-libtoolize: \`$_lt_pkgdatadir/libltdl/m4/ltversion.m4'
-libtoolize: \`$_lt_pkgdatadir/libltdl/m4/ltsugar.m4'
+libtoolize: \`$tst_aclocaldir/libtool.m4'
+libtoolize: \`$tst_aclocaldir/ltoptions.m4'
+libtoolize: \`$tst_aclocaldir/ltversion.m4'
+libtoolize: \`$tst_aclocaldir/ltsugar.m4'
EOF]
LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
@@ -425,6 +427,8 @@
## ------------------------------------------- ##
LT_AT_ACLOCAL([-I m4])
+
+rm -f m4/libtool.m4 m4/ltoptions.m4
# This file should be upgraded.
AT_DATA([m4/libtool.m4], [[
Index: tests/nonrecursive.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/nonrecursive.at,v
retrieving revision 1.1
diff -u -r1.1 nonrecursive.at
--- tests/nonrecursive.at 2 Nov 2005 17:45:59 -0000 1.1
+++ tests/nonrecursive.at 8 Nov 2005 22:03:48 -0000
@@ -55,9 +55,10 @@
include libltdl/Makefile.inc
foo_la_LDFLAGS = -module -avoid-version
+foo_la_SOURCES = foo.c
]])
-echo 'static int dummy = 0;' > foo.c
+echo 'int dummy = 0;' > foo.c
])# _LTDL_SETUP
## ------------------------ ##
Index: tests/old-m4-iface.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/old-m4-iface.at,v
retrieving revision 1.6
diff -u -r1.6 old-m4-iface.at
--- tests/old-m4-iface.at 7 Nov 2005 15:37:11 -0000 1.6
+++ tests/old-m4-iface.at 8 Nov 2005 22:03:48 -0000
@@ -96,6 +96,7 @@
AT_DATA([configure.in],
[[AC_INIT([main.c])
AC_PROG_MAKE_SET
+AC_LIBTOOL_DLOPEN
AM_PROG_LIBTOOL
AC_WITH_LTDL
AC_OUTPUT(Makefile)
Index: tests/recursive.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/recursive.at,v
retrieving revision 1.1
diff -u -r1.1 recursive.at
--- tests/recursive.at 7 Nov 2005 14:16:15 -0000 1.1
+++ tests/recursive.at 8 Nov 2005 22:03:48 -0000
@@ -39,9 +39,10 @@
SUBDIRS = ltdl
lib_LTLIBRARIES = foo.la
foo_la_LDFLAGS = -module -avoid-version
+foo_la_SOURCES = foo.c
]])
-echo 'static int dummy = 0;' > foo.c
+echo 'int dummy = 0;' > foo.c
])# _LTDL_SETUP
## ------------------------ ##
Index: tests/subproject.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/subproject.at,v
retrieving revision 1.8
diff -u -r1.8 subproject.at
--- tests/subproject.at 7 Nov 2005 15:37:11 -0000 1.8
+++ tests/subproject.at 8 Nov 2005 22:03:48 -0000
@@ -36,12 +36,13 @@
AT_DATA([Makefile.am],
[[ACLOCAL_AMFLAGS = -I sub/ltdl/m4
+AUTOMAKE_OPTIONS = 1.9
SUBDIRS = sub/ltdl
lib_LTLIBRARIES = foo.la
foo_la_LDFLAGS = -module -avoid-version
]])
-echo 'static int dummy = 0;' > foo.c
+echo 'int dummy = 0;' > foo.c
])# _LTDL_SETUP
## ------------------------ ##
Index: tests/testsuite.at
===================================================================
RCS file: /cvsroot/libtool/libtool/tests/testsuite.at,v
retrieving revision 1.29
diff -u -r1.29 testsuite.at
--- tests/testsuite.at 7 Nov 2005 15:37:11 -0000 1.29
+++ tests/testsuite.at 8 Nov 2005 22:42:38 -0000
@@ -24,6 +24,9 @@
: ${AUTOCONF=autoconf}
: ${AUTOMAKE=automake}
: ${AUTORECONF=autoreconf}
+for tool in ACLOCAL AUTOHEADER AUTOCONF AUTOMAKE AUTORECONF; do
+ if eval \$$tool --version >/dev/null 2>&1; then :; else eval $tool=no; fi
+done
export ACLOCAL AUTOHEADER AUTOCONF AUTOMAKE AUTORECONF
macrodir="$abs_top_srcdir/libltdl/m4"
eval `$LIBTOOL --config | grep ^EGREP=`
@@ -59,6 +62,7 @@
# --------------------------
m4_define([LT_AT_ACLOCAL],
[AT_CHECK([$ACLOCAL $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$ACLOCAL" = no])
])
@@ -66,13 +70,16 @@
# --------------------------
m4_define([LT_AT_AUTOCONF],
[AT_CHECK([$AUTOCONF $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$AUTOCONF" = no])
])
# LT_AT_AUTOMAKE([OPTIONS])
# --------------------------
m4_define([LT_AT_AUTOMAKE],
-[AT_CHECK([$AUTOMAKE $1], [0], [ignore], [ignore])
+[AT_CHECK([$AUTOMAKE $1], [0], [ignore], [stderr],
+[AT_CHECK([grep 'require Automake.*but have' stderr && (exit 77)], [1])])
+AT_XFAIL_IF([test "$AUTOMAKE" = no])
])
@@ -80,6 +87,7 @@
# ---------------------------
m4_define([LT_AT_AUTOHEADER],
[AT_CHECK([$AUTOHEADER $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$AUTOHEADER" = no])
])
@@ -87,6 +95,7 @@
# --------------------------
m4_define([LT_AT_AUTORECONF],
[AT_CHECK([$AUTORECONF $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$AUTORECONF" = no])
])
@@ -101,7 +110,7 @@
# --------------------------
m4_define([LT_AT_MAKE],
[( $unset LIBTOOL LIBTOOLIZE
- AT_CHECK([$2 $MAKE -e $1], [0], [ignore], [ignore]) )
+ AT_CHECK([$MAKE $1 $2], [0], [ignore], [ignore]) )
])
@@ -210,7 +219,9 @@
all: $(TARGETS)
$(LIBTOOL) ]_ARG_DIR[/libltdlc.la: ]_ARG_DIR[/Makefile
- cd ]_ARG_DIR[ && $(MAKE)
+ cd ]_ARG_DIR[ && $(MAKE) CC="$(CC)" LIBTOOLFLAGS="$(LIBTOOLFLAGS)" \
+ CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" \
+ CONFIGURE_OPTIONS="$(CONFIGURE_OPTIONS)"
]_ARG_DIR[/Makefile:
cd ]_ARG_DIR[ && ./configure $(CONFIGURE_OPTIONS)
- HEAD: testsuite update,
Ralf Wildenhues <=