Re: make -s

[Ralf Wildenhues]

* Ralf Wildenhues wrote on Thu, Jan 10, 2008 at 08:29:33AM CET:
> 
> For whatever output is left done by libtool I expect that whoever want's
> it silenced hard enough will have enough motivation to send a patch to
> <address@hidden>.

Since repeatedly nobody stepped forward to do this, I wrote that patch
myself now.  OK to apply to HEAD?

Cheers,
Ralf

2008-01-14  Ralf Wildenhues  <address@hidden>

        Silence all non-warning output from `libtool --silent'.
        * libltdl/config/ltmain.m4sh (func_generate_dlsyms)
        (func_extract_archives, func_mode_link): Use func_verbose
        instead of func_echo for all non-warning output.

Index: libltdl/config/ltmain.m4sh
===================================================================
RCS file: /cvsroot/libtool/libtool/libltdl/config/ltmain.m4sh,v
retrieving revision 1.95
diff -u -r1.95 ltmain.m4sh
--- libltdl/config/ltmain.m4sh  12 Jan 2008 13:58:14 -0000      1.95
+++ libltdl/config/ltmain.m4sh  14 Jan 2008 21:19:24 -0000
@@ -879,7 +879,7 @@
        func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
 
        # Parse the name list into a source file.
-       func_echo "creating $output_objdir/$my_dlsyms"
+       func_verbose "creating $output_objdir/$my_dlsyms"
 
        $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
 /* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. 
*/
@@ -893,14 +893,14 @@
 "
 
        if test "$dlself" = yes; then
-         func_echo "generating symbol list for \`$output'"
+         func_verbose "generating symbol list for \`$output'"
 
          $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
          # Add our own program objects to the symbol list.
          progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | 
$NL2SP`
          for progfile in $progfiles; do
-           func_echo "extracting global C symbols from \`$progfile'"
+           func_verbose "extracting global C symbols from \`$progfile'"
            $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> 
'$nlist'"
          done
 
@@ -947,7 +947,7 @@
        fi
 
        for dlprefile in $dlprefiles; do
-         func_echo "extracting global C symbols from \`$dlprefile'"
+         func_verbose "extracting global C symbols from \`$dlprefile'"
          func_basename "$dlprefile"
          name="$func_basename_result"
          $opt_dry_run || {
@@ -1159,7 +1159,7 @@
 
       case $host in
       *-darwin*)
-       func_echo "Extracting $my_xabs"
+       func_verbose "Extracting $my_xabs"
        # Do not bother doing anything if just a dry run
        $opt_dry_run || {
          darwin_orig_dir=`pwd`
@@ -1171,7 +1171,7 @@
          if test -n "$darwin_arches"; then
            darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
            darwin_arch=
-           func_echo "$darwin_base_archive has multiple architectures 
$darwin_arches"
+           func_verbose "$darwin_base_archive has multiple architectures 
$darwin_arches"
            for darwin_arch in  $darwin_arches ; do
              func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
              lipo -thin $darwin_arch -output 
"unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" 
"${darwin_archive}"
@@ -4655,13 +4655,13 @@
            # If the library has no export list, then create one now
            if test -f "$output_objdir/$soname-def"; then :
            else
-             func_echo "extracting exported symbol list from \`$soname'"
+             func_verbose "extracting exported symbol list from \`$soname'"
              func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
            fi
 
            # Create $newlib
            if test -f "$output_objdir/$newlib"; then :; else
-             func_echo "generating import library for \`$soname'"
+             func_verbose "generating import library for \`$soname'"
              func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
            fi
            # make sure the library variables are pointing to the new library
@@ -5982,7 +5982,7 @@
        # Prepare the list of exported symbols
        if test -z "$export_symbols"; then
          if test "$always_export_symbols" = yes || test -n 
"$export_symbols_regex"; then
-           func_echo "generating symbol list for \`$libname.la'"
+           func_verbose "generating symbol list for \`$libname.la'"
            export_symbols="$output_objdir/$libname.exp"
            $opt_dry_run || $RM $export_symbols
            cmds=$export_symbols_cmds
@@ -5996,7 +5996,7 @@
                skipped_export=false
              else
                # The command line is too long to execute in one step.
-               func_echo "using reloadable object file for export list..."
+               func_verbose "using reloadable object file for export list..."
                skipped_export=:
                # Break out early, otherwise skipped_export may be
                # set to false by a later but shorter cmd.
@@ -6019,7 +6019,7 @@
 
        if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; 
then
          # The given exports_symbols file has to be filtered, so filter it.
-         func_echo "filter symbol list for \`$libname.la' to tag DATA exports"
+         func_verbose "filter symbol list for \`$libname.la' to tag DATA 
exports"
          # FIXME: $output_objdir/$libname.filter potentially contains lots of
          # 's' commands which not all seds can handle. GNU sed should be fine
          # though. Also, the filter scales superlinearly with the number of
@@ -6126,7 +6126,7 @@
 
          if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test 
"$with_gnu_ld" = yes; then
            output=${output_objdir}/${output_la}.lnkscript
-           func_echo "creating GNU ld script: $output"
+           func_verbose "creating GNU ld script: $output"
            $ECHO 'INPUT (' > $output
            for obj in $save_libobjs
            do
@@ -6136,7 +6136,7 @@
            delfiles="$delfiles $output"
          elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && 
test "X$file_list_spec" != X; then
            output=${output_objdir}/${output_la}.lnk
-           func_echo "creating linker input file list: $output"
+           func_verbose "creating linker input file list: $output"
            : > $output
            set x $save_libobjs
            shift
@@ -6153,7 +6153,7 @@
            output=$firstobj\"$file_list_spec$output\"
          else
            if test -n "$save_libobjs"; then
-             func_echo "creating reloadable object files..."
+             func_verbose "creating reloadable object files..."
              output=$output_objdir/$output_la-${k}.$objext
              # Loop over the list of objects to be linked.
              for obj in $save_libobjs
@@ -6196,7 +6196,7 @@
            fi
 
            if ${skipped_export-false}; then
-             func_echo "generating symbol list for \`$libname.la'"
+             func_verbose "generating symbol list for \`$libname.la'"
              export_symbols="$output_objdir/$libname.exp"
              $opt_dry_run || $RM $export_symbols
              libobjs=$output
@@ -6209,7 +6209,7 @@
            fi
 
            test -n "$save_libobjs" &&
-             func_echo "creating a temporary reloadable object file: $output"
+             func_verbose "creating a temporary reloadable object file: 
$output"
 
            # Loop through the commands generated above and execute them.
            save_ifs="$IFS"; IFS='~'
@@ -6249,7 +6249,7 @@
 
            if test -n "$orig_export_symbols"; then
              # The given exports_symbols file has to be filtered, so filter it.
-             func_echo "filter symbol list for \`$libname.la' to tag DATA 
exports"
+             func_verbose "filter symbol list for \`$libname.la' to tag DATA 
exports"
              # FIXME: $output_objdir/$libname.filter potentially contains lots 
of
              # 's' commands which not all seds can handle. GNU sed should be 
fine
              # though. Also, the filter scales superlinearly with the number of
@@ -6746,7 +6746,7 @@
       func_show_eval "$link_command" 'exit $?'
 
       # Now create the wrapper script.
-      func_echo "creating $output"
+      func_verbose "creating $output"
 
       # Quote the relink command for shipping.
       if test -n "$relink_command"; then
@@ -6928,7 +6928,7 @@
          cmds=$old_archive_cmds
        else
          # the command line is too long to link in one step, link in parts
-         func_echo "using piecewise archive linking..."
+         func_verbose "using piecewise archive linking..."
          save_RANLIB=$RANLIB
          RANLIB=:
          objlist=
@@ -6978,7 +6978,7 @@
     *.la)
       old_library=
       test "$build_old_libs" = yes && old_library="$libname.$libext"
-      func_echo "creating $output"
+      func_verbose "creating $output"
 
       # Preserve any variables that may affect compiler behavior
       for var in $variables_saved_for_relink; do