[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Building on an ARM-based NAS fails 'Standalone' test section
|
From: |
MacFH - C E Macfarlane |
|
Subject: |
Building on an ARM-based NAS fails 'Standalone' test section |
|
Date: |
Fri, 23 Sep 2016 11:59:43 +0100 |
Bit of a tangled tale to tell, but I hope that someone here can help me ...
I have two Zyxel NSA221 twin-bay NASs. Their specs are as follows ...
CPU: arm5
Kernel: 2.6.24.4
GLibC: 2.8
libc-dev: 2.5-5
GCC: 4.2.3
... and, in case it should prove useful, I've appended fuller details of
their configuration, anonymised where appropriate. One of the features of
such an OEM device is that control of the /usr directory is with the
firmware, and largely set in silicon, and consequently add-on functionality
has to be put elsewhere. As I've already added ipkg and it uses /opt, I've
been adding stuff of my own choosing there as well. Another consequence of
this is that the system headers are not installed by default, and therefore
have to be added from elsewhere, in this case via ipkg, and thus not only
are they not where most software builds would expect, but also there is a
mismatch between the GLibC version number apparently installed in silicon,
2.8, and the headers under the /opt/include directory, 2.5-5. Nevertheless,
a great deal of software seems to build and run successfully.
Except that for some time, I've been trying to upgrade the version of GCC to
4.9.3, because apparently the above version has significant problems when
compiling software such as FFMPEG, but I've never succeeded in getting a
'make' to complete without error, until yesterday when, to my gratified
astonishment after three days grinding away, for the first time ever a
'make' finally completed apparently successfully. However, when I tried to
test it using 'make check', I hit a dependency chain: 'make check' for gcc
<- autogen <- guile <- libtool.
Thus it is that I'm trying to build libtool 2.4.6 on one of these machines,
still using gcc 4.2.3 - 'configure --prefix /opt' and 'make' complete
apparently without error, but 'make check' encounters errors in the
standalone section, as in the following extract from ./tests/testsuite.log:
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: 141 tests were run,
64 failed (59 expected failures).
29 tests were skipped.
## ------------------------ ##
## Summary of the failures. ##
## ------------------------ ##
Failed tests:
GNU Libtool 2.4.6 test suite test groups:
NUM: FILE-NAME:LINE TEST-GROUP-NAME
KEYWORDS
123: standalone.at:31 compiling softlinked libltdl
libtoolize
124: standalone.at:46 compiling copied libltdl
libtoolize
125: standalone.at:61 installable libltdl
libtoolize
126: standalone.at:79 linking libltdl without autotools
libtoolize
130: subproject.at:109 linking libltdl without autotools
libtoolize
Can anyone help me get 'make check' to run successfully on this machine?
TIA
Charles Macfarlane
APPENDIX 1
=========
The full ./tests/testsuite.log is as follows:
## ----------------------------- ##
## GNU Libtool 2.4.6 test suite. ##
## ----------------------------- ##
testsuite: command line was:
$ /root/build/libtool-2.4.6/tests/testsuite MAKE=make CC=gcc CFLAGS=-g -O2
CPP=gcc -E CPPFLAGS= LD=/opt/arm-none-linux-gnueabi/bin/ld LDFLAGS= LIBS=
LN_S=ln -s NM=/opt/bin/nm -B RANLIB=ranlib AR=ar EGREP=/bin/grep -E
FGREP=/bin/grep -F GREP=/bin/grep SED=/bin/sed STRIP=strip
lt_INSTALL=/opt/bin/install -c MANIFEST_TOOL=: OBJEXT=o EXEEXT=
SHELL=/opt/bin/bash CONFIG_SHELL=/opt/bin/bash CXX=g++ CXXFLAGS=-g -O2
CXXCPP=g++ -E F77= FFLAGS= FC= FCFLAGS= GCJ= GCJFLAGS=-g -O2
lt_cv_with_aix_soname=aix lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop
_lt_pkgdatadir=/root/build/libtool-2.4.6
LIBTOOLIZE=/root/build/libtool-2.4.6/libtoolize
LIBTOOL=/root/build/libtool-2.4.6/libtool
tst_aclocaldir=/root/build/libtool-2.4.6/m4
## ---------- ##
## ChangeLog. ##
## ---------- ##
| 2015-02-15 Gary V. Vaughan <address@hidden>
|
| version 2.4.6
| * NEWS: Record release date.
|
| 2015-02-06 Gary V. Vaughan <address@hidden>
|
| libtool: don't execute automake and autoconf on every invocation.
| Regression from 2.4.2 was causing noticable slow-down in builds
| that call libtool many times.
## --------- ##
## Platform. ##
## --------- ##
hostname = NASY
uname -m = armv5tejl
uname -r = 2.6.24.4
uname -s = Linux
uname -v = #1 Mon Aug 5 15:20:10 CST 2013
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /root/build/libtool-2.4.6/tests
PATH: /opt/share/bin
PATH: /opt/share/sbin
PATH: /opt/bin
PATH: /opt/sbin
PATH: /usr/local/bin
PATH: /usr/local/sbin
PATH: /usr/bin
PATH: /usr/sbin
PATH: /usr/local/zy-pkgs/bin
PATH: /bin
PATH: /sbin
PATH: /zyxel/sbin
testsuite: atconfig:
| # Configurable variable values for building test suites.
| # Generated by ./config.status.
| # Copyright (C) 2012 Free Software Foundation, Inc.
|
| # The test suite will define top_srcdir=/../.. etc.
| at_testdir='tests'
| abs_builddir='/root/build/libtool-2.4.6/tests'
| at_srcdir='.'
| abs_srcdir='/root/build/libtool-2.4.6/tests'
| at_top_srcdir='..'
| abs_top_srcdir='/root/build/libtool-2.4.6'
| at_top_build_prefix='../'
| abs_top_builddir='/root/build/libtool-2.4.6'
|
| # Backward compatibility with Autotest <= 2.59b:
| at_top_builddir=$at_top_build_prefix
|
| AUTOTEST_PATH='tests'
|
| SHELL=${CONFIG_SHELL-'/opt/bin/bash'}
## ---------------- ##
## Tested programs. ##
## ---------------- ##
## ------------------ ##
## Running the tests. ##
## ------------------ ##
testsuite: starting at: Thu Sep 22 20:39:12 WEST 2016
1. func_munge_path_list works (configure-funcs.at:39): ok (0m0.410s
0m0.450s)
2. libtoolize macro installation (libtoolize.at:84): ok (0m0.900s
0m1.770s)
3. libtoolize macro directory mismatch error (libtoolize.at:109): ok
(0m0.590s 0m1.480s)
4. multiple AC_CONFIG_MACRO_DIRS invocation (libtoolize.at:130): ok
(0m0.700s 0m1.920s)
5. multiple AC_CONFIG_MACRO_DIRS directories (libtoolize.at:158): ok
(0m1.020s 0m1.630s)
6. libtoolize ACLOCAL_AMFLAGS extraction (libtoolize.at:190): ok
(0m0.830s 0m2.020s)
7. libtoolize macro serial update (libtoolize.at:225): ok (0m8.160s
0m10.900s)
8. libtoolize config files serial update (libtoolize.at:298): ok
(0m9.750s 0m15.660s)
9. diagnose missing LT_CONFIG_LTDL_DIR (libtoolize.at:378): ok (0m1.410s
0m4.060s)
10. copy ltdl.m4 with shared macro directory (libtoolize.at:523): ok
(0m2.790s 0m7.560s)
11. correctly parse LTDL_INIT from configure.ac (libtoolize.at:535): ok
(0m2.410s 0m8.000s)
12. diagnose missing LTDL_INIT invocation (libtoolize.at:547): ok
(0m2.540s 0m7.820s)
15. nonrecursive ltdl with AC_CONFIG_MACRO_DIRS (libtoolize.at:877): ok
(0m1.520s 0m4.050s)
16. subproject ltdl with unconventional layout (libtoolize.at:948): ok
(0m3.180s 0m8.090s)
17. Subproject ltdl without GNU M4 (libtoolize.at:1024): ok (0m3.050s
0m7.030s)
18. LIBTOOLIZE_OPTIONS (libtoolize.at:1096): ok (0m4.250s 0m5.420s)
19. cleanup old installation (libtoolize.at:1142): ok (0m2.980s
0m8.930s)
20. check help output (libtool.at:33): ok (0m1.850s 0m0.530s)
21. diagnose no mode specified (libtool.at:48): ok (0m1.920s 0m0.230s)
22. quote shell meta-characters in filenames (libtool.at:60): ok
(2m0.180s 0m21.900s)
23. transform source suffices (libtool.at:155): ok (2m21.220s 0m14.770s)
24. check link mode operation (libtool.at:183): ok (0m4.720s 0m0.730s)
25. check objectlist file operation (libtool.at:205): ok (0m2.140s
0m0.260s)
26. test LT_SUPPORTED_TAG interface (libtool.at:217): ok (0m54.900s
0m5.220s)
44. C convenience archives (convenience.at:30): ok (0m45.200s 0m14.770s)
45. C++ convenience archives (convenience.at:69): ok (1m17.480s
0m18.720s)
46. F77 convenience archives (convenience.at:109): skipped
(convenience.at:110)
47. FC convenience archives (convenience.at:169): skipped
(convenience.at:170)
48. Java convenience archives (convenience.at:229): skipped
(convenience.at:230)
54. standard command line options (help.at:26): ok (0m5.150s 0m1.830s)
55. mode short-hands (help.at:45): ok (0m28.960s 0m5.630s)
56. debug tracing (help.at:97): ok (1m19.580s 0m20.220s)
57. duplicate members in archive tests (duplicate_members.at:26): ok
(0m29.030s 0m9.520s)
58. duplicate convenience archive names (duplicate_conv.at:25): ok
(0m47.110s 0m12.110s)
60. passing CC flags through libtool (flags.at:116): ok (0m42.200s
0m7.650s)
61. passing CXX flags through libtool (flags.at:116): ok (1m5.730s
0m11.030s)
62. passing F77 flags through libtool (flags.at:116): skipped (flags.at:116)
63. passing FC flags through libtool (flags.at:116): skipped (flags.at:116)
64. passing GCJ flags through libtool (flags.at:116): skipped (flags.at:116)
65. inherited_linker_flags (inherited_flags.at:26): ok (0m37.980s
0m11.460s)
66. Link order test (link-order.at:27): ok (1m6.510s 0m16.340s)
67. Link order of deplibs (link-order2.at:46): ok (2m7.870s 0m27.890s)
68. Failure tests (fail.at:28): ok (0m23.770s 0m5.720s)
69. shlibpath_overrides_runpath (shlibpath.at:25): ok (0m27.850s
0m6.320s)
70. Runpath in libtool library files (runpath-in-lalib.at:25): ok
(0m24.520s 0m6.590s)
71. static linking flags for programs (static.at:68): ok (2m29.750s
1m2.840s)
72. ccache -all-static (static.at:359): ok (0m3.340s 0m0.970s)
73. Export test (export.at:25): ok (1m8.500s 0m22.610s)
74. export from a DLL with a .def file (export-def.at:25): skipped
(export-def.at:35)
75. sys_lib_search_path (search-path.at:24): ok (0m7.540s 0m1.360s)
76. sys_lib_search_path on w32 (search-path.at:62): skipped
(search-path.at:85)
77. indirect convenience (indirect_deps.at:25): ok (0m35.390s 0m10.730s)
78. indirect uninstalled (indirect_deps.at:71): ok (0m42.580s 0m13.020s)
80. both of -o prog and -o prog$EXEEXT work (exeext.at:26): skipped
(exeext.at:29)
81. execute mode (execute-mode.at:25): ok (2m24.960s 0m38.810s)
82. bindir basic lib test (bindir.at:64): ok (0m23.230s 0m6.760s)
83. bindir install tests (bindir.at:173): ok (9m4.070s 2m17.400s)
84. cwrapper for uninstalled executables (cwrapper.at:25): ok (0m59.180s
0m21.090s)
85. cwrapper string length (cwrapper.at:138): skipped (cwrapper.at:190)
86. cwrapper and installed shared libraries (cwrapper.at:201): ok
(0m21.870s 0m6.810s)
87. deplib in subdir (deplib-in-subdir.at:34): ok (1m23.550s 0m26.470s)
88. inferred tag (infer-tag.at:30): ok (0m1.810s 0m0.580s)
89. CXX inferred tag (infer-tag.at:42): ok (0m2.530s 0m0.730s)
90. F77 inferred tag (infer-tag.at:55): skipped (infer-tag.at:56)
91. FC inferred tag (infer-tag.at:69): skipped (infer-tag.at:70)
92. GCJ inferred tag (infer-tag.at:83): skipped (infer-tag.at:84)
93. localized compiler messages (localization.at:24): ok (0m3.610s
0m1.450s)
94. nocase library search (nocase.at:26): skipped (nocase.at:33)
95. Install tests (install.at:25): ok (0m12.730s 0m2.680s)
96. versioning (versioning.at:24): ok (1m55.500s 0m28.460s)
97. Simple DESTDIR install (destdir.at:48): ok (0m15.360s 0m4.440s)
98. DESTDIR with in-package deplibs (destdir.at:75): ok (0m57.560s
0m15.620s)
99. AM_PROG_LIBTOOL (old-m4-iface.at:41): ok (1m1.470s 0m31.890s)
101. AC_CONFIG_MACRO_DIR (old-m4-iface.at:173): ok (0m0.880s 0m1.900s)
105. lt_dlexit unloading libs (lt_dlexit.at:30): ok (0m18.390s 0m4.300s)
106. lt_dlopenadvise library loading (lt_dladvise.at:28): ok (0m36.840s
0m9.380s)
108. lt_dlopen archive (lt_dlopen_a.at:23): ok (0m14.140s 0m3.390s)
109. lt_dlopenext error messages (lt_dlopenext.at:23): ok (0m18.240s
0m5.090s)
110. libdir of installed modules (ltdl-libdir.at:23): ok (0m14.430s
0m2.820s)
111. ltdl API (ltdl-api.at:25): skipped (ltdl-api.at:31)
112. dlloader API (dlloader-api.at:23): ok (0m12.860s 0m3.180s)
113. loadlibrary error messages (loadlibrary.at:23): skipped
(loadlibrary.at:250)
115. resident modules (resident.at:27): ok (0m11.000s 0m3.140s)
116. SList functionality (slist.at:24): ok (0m7.220s 0m0.720s)
117. enforced lib prefix (need_lib_prefix.at:25): ok (0m28.250s
0m6.850s)
141. simple template test (template.at:28): ok (0m24.100s 0m5.830s)
142. template test with subdirs (template.at:127): ok (1m37.060s
0m22.810s)
143. C++ static constructors (ctor.at:27): ok (0m18.210s 0m4.490s)
144. C++ exception handling (exceptions.at:24): ok (2m7.390s 0m13.650s)
153. static library (f77demo.at:296): skipped (f77demo.at:301)
154. shared library (f77demo.at:314): skipped (f77demo.at:316)
155. shared and static together (f77demo.at:329): skipped (f77demo.at:331)
156. static library (fcdemo.at:310): skipped (fcdemo.at:315)
157. shared library (fcdemo.at:328): skipped (fcdemo.at:330)
158. shared and static together (fcdemo.at:343): skipped (fcdemo.at:345)
159. darwin fat compile (darwin.at:26): skipped (darwin.at:42)
160. darwin concurrent library extraction (darwin.at:103): ok (0m59.250s
0m21.350s)
161. darwin gdb debug information (darwin.at:152): skipped (darwin.at:154)
163. darwin can lt_dlopen .dylib and .so files (darwin.at:232): skipped
(darwin.at:249)
164. dumpbin -symbols section hiding (dumpbin-symbols.at:25): skipped
(dumpbin-symbols.at:42)
165. deplibs without file command (deplibs-mingw.at:27): ok (0m15.830s
0m3.720s)
166. -L=.../lib -l (sysroot.at:203): skipped (sysroot.at:203)
167. -L SYSROOT/.../lib -l (sysroot.at:204): skipped (sysroot.at:204)
168. SYSROOT/.../*.la (sysroot.at:205): skipped (sysroot.at:205)
169. Link option thorough search test (stresstest.at:31): ok (22m4.290s
7m18.100s)
170. Run tests with low max_cmd_len (cmdline_wrap.at:28): ok (54m13.410s
16m6.710s)
testsuite: ending at: Fri Sep 23 00:04:03 WEST 2016
testsuite: test suite duration: 3h 24m 51s
## ------------- ##
## Test results. ##
## ------------- ##
ERROR: 141 tests were run,
64 failed (59 expected failures).
29 tests were skipped.
## ------------------------ ##
## Summary of the failures. ##
## ------------------------ ##
Failed tests:
GNU Libtool 2.4.6 test suite test groups:
NUM: FILE-NAME:LINE TEST-GROUP-NAME
KEYWORDS
123: standalone.at:31 compiling softlinked libltdl
libtoolize
124: standalone.at:46 compiling copied libltdl
libtoolize
125: standalone.at:61 installable libltdl
libtoolize
126: standalone.at:79 linking libltdl without autotools
libtoolize
130: subproject.at:109 linking libltdl without autotools
libtoolize
Skipped tests:
GNU Libtool 2.4.6 test suite test groups:
NUM: FILE-NAME:LINE TEST-GROUP-NAME
KEYWORDS
46: convenience.at:109 F77 convenience archives
f77 libtool
47: convenience.at:169 FC convenience archives
fc libtool
48: convenience.at:229 Java convenience archives
gcj libtool
62: flags.at:116 passing F77 flags through libtool
libtool f77
63: flags.at:116 passing FC flags through libtool
libtool fc
64: flags.at:116 passing GCJ flags through libtool
libtool gcj
74: export-def.at:25 export from a DLL with a .def file
libtool
76: search-path.at:62 sys_lib_search_path on w32
libtool
80: exeext.at:26 both of -o prog and -o prog$EXEEXT work
libtool
85: cwrapper.at:138 cwrapper string length
90: infer-tag.at:55 F77 inferred tag
f77 libtool
91: infer-tag.at:69 FC inferred tag
fc libtool
92: infer-tag.at:83 GCJ inferred tag
gcj libtool
94: nocase.at:26 nocase library search
libtool
111: ltdl-api.at:25 ltdl API
libltdl
113: loadlibrary.at:23 loadlibrary error messages
libltdl
153: f77demo.at:296 static library
interactive f77 libtool autoconf libtoolize automake
154: f77demo.at:314 shared library
f77 libtool autoconf libtoolize automake
155: f77demo.at:329 shared and static together
f77 libtool autoconf libtoolize automake
156: fcdemo.at:310 static library
interactive fc libtool autoconf libtoolize automake
157: fcdemo.at:328 shared library
fc libtool autoconf libtoolize automake
158: fcdemo.at:343 shared and static together
fc libtool autoconf libtoolize automake
159: darwin.at:26 darwin fat compile
161: darwin.at:152 darwin gdb debug information
163: darwin.at:232 darwin can lt_dlopen .dylib and .so files
libltdl dylib
164: dumpbin-symbols.at:25 dumpbin -symbols section hiding
166: sysroot.at:203 -L=.../lib -l
libtool sysroot libtoolize automake autoconf
167: sysroot.at:204 -L SYSROOT/.../lib -l
libtool sysroot libtoolize automake autoconf
168: sysroot.at:205 SYSROOT/.../*.la
libtool sysroot libtoolize automake autoconf
## ---------------------- ##
## Detailed failed tests. ##
## ---------------------- ##
# -*- compilation -*-
123. standalone.at:31: testing compiling softlinked libltdl ...
./standalone.at:33: $LIBTOOLIZE --ltdl=.
stdout:
libtoolize: putting auxiliary files in '.'.
libtoolize: linking file './compile'
libtoolize: linking file './config.guess'
libtoolize: linking file './config.sub'
libtoolize: linking file './depcomp'
libtoolize: linking file './install-sh'
libtoolize: linking file './missing'
libtoolize: linking file './ltmain.sh'
libtoolize: putting macros in './m4'.
libtoolize: linking file './m4/libtool.m4'
libtoolize: linking file './m4/ltargz.m4'
libtoolize: linking file './m4/ltdl.m4'
libtoolize: linking file './m4/ltoptions.m4'
libtoolize: linking file './m4/ltsugar.m4'
libtoolize: linking file './m4/ltversion.m4'
libtoolize: linking file './m4/lt~obsolete.m4'
libtoolize: putting libltdl files in '.'.
libtoolize: linking file './COPYING.LIB'
libtoolize: creating file './Makefile.am'
libtoolize: linking file './README'
libtoolize: creating file './configure.ac'
libtoolize: creating file './aclocal.m4'
libtoolize: creating file './Makefile.in'
libtoolize: linking file './config-h.in'
libtoolize: creating file './configure'
libtoolize: linking file './libltdl/lt__alloc.h'
libtoolize: linking file './libltdl/lt__argz_.h'
libtoolize: linking file './libltdl/lt__dirent.h'
libtoolize: linking file './libltdl/lt__glibc.h'
libtoolize: linking file './libltdl/lt__private.h'
libtoolize: linking file './libltdl/lt__strl.h'
libtoolize: linking file './libltdl/lt_dlloader.h'
libtoolize: linking file './libltdl/lt_error.h'
libtoolize: linking file './libltdl/lt_system.h'
libtoolize: linking file './libltdl/slist.h'
libtoolize: linking file './loaders/dld_link.c'
libtoolize: linking file './loaders/dlopen.c'
libtoolize: linking file './loaders/dyld.c'
libtoolize: linking file './loaders/load_add_on.c'
libtoolize: linking file './loaders/loadlibrary.c'
libtoolize: linking file './loaders/preopen.c'
libtoolize: linking file './loaders/shl_load.c'
libtoolize: linking file './lt__alloc.c'
libtoolize: linking file './lt__argz.c'
libtoolize: linking file './lt__dirent.c'
libtoolize: linking file './lt__strl.c'
libtoolize: linking file './lt_dlloader.c'
libtoolize: linking file './lt_error.c'
libtoolize: linking file './ltdl.c'
libtoolize: linking file './ltdl.h'
libtoolize: linking file './slist.c'
./standalone.at:34: : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL;
$CONFIG_SHELL ./configure $configure_options --prefix="$prefix"
--exec-prefix="$prefix" --bindir="$prefix/bin" --libdir="$prefix/lib"
stderr:
stdout:
checking for a BSD-compatible install... /opt/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... armv5tejl-unknown-linux-gnueabi
checking host system type... armv5tejl-unknown-linux-gnueabi
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /opt/arm-none-linux-gnueabi/bin/ld
checking if the linker (/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /opt/bin/nm -B
checking the name lister (/opt/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 32768
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
armv5tejl-unknown-linux-gnueabi format... (cached) func_convert_file_noop
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
toolchain format... (cached) func_convert_file_noop
checking for /opt/arm-none-linux-gnueabi/bin/ld option to reload object
files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /opt/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /opt/bin/dd
checking how to truncate binary pipes... /opt/bin/dd bs=4096 count=1
checking for mt... :
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/opt/arm-none-linux-gnueabi/bin/ld)
supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking what extension is used for runtime loadable modules... .so
checking what variable specifies run-time module search path...
LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
./standalone.at:35: $as_unset LIBTOOL; $as_unset LIBTOOLIZE; $MAKE $target
stderr:
/opt/bin/bash: no: command not found
make: *** [aclocal.m4] Error 127
stdout:
CDPATH="${ZSH_VERSION+.}:" && cd . && no -I m4
./standalone.at:35: exit code was 2, expected 0
123. standalone.at:31: 123. compiling softlinked libltdl (standalone.at:31):
FAILED (standalone.at:35)
# -*- compilation -*-
124. standalone.at:46: testing compiling copied libltdl ...
./standalone.at:48: $LIBTOOLIZE --copy --ltdl=.
stdout:
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './compile'
libtoolize: copying file './config.guess'
libtoolize: copying file './config.sub'
libtoolize: copying file './depcomp'
libtoolize: copying file './install-sh'
libtoolize: copying file './missing'
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in './m4'.
libtoolize: copying file './m4/libtool.m4'
libtoolize: copying file './m4/ltargz.m4'
libtoolize: copying file './m4/ltdl.m4'
libtoolize: copying file './m4/ltoptions.m4'
libtoolize: copying file './m4/ltsugar.m4'
libtoolize: copying file './m4/ltversion.m4'
libtoolize: copying file './m4/lt~obsolete.m4'
libtoolize: putting libltdl files in '.'.
libtoolize: copying file './COPYING.LIB'
libtoolize: creating file './Makefile.am'
libtoolize: copying file './README'
libtoolize: creating file './configure.ac'
libtoolize: creating file './aclocal.m4'
libtoolize: creating file './Makefile.in'
libtoolize: copying file './config-h.in'
libtoolize: creating file './configure'
libtoolize: copying file './libltdl/lt__alloc.h'
libtoolize: copying file './libltdl/lt__argz_.h'
libtoolize: copying file './libltdl/lt__dirent.h'
libtoolize: copying file './libltdl/lt__glibc.h'
libtoolize: copying file './libltdl/lt__private.h'
libtoolize: copying file './libltdl/lt__strl.h'
libtoolize: copying file './libltdl/lt_dlloader.h'
libtoolize: copying file './libltdl/lt_error.h'
libtoolize: copying file './libltdl/lt_system.h'
libtoolize: copying file './libltdl/slist.h'
libtoolize: copying file './loaders/dld_link.c'
libtoolize: copying file './loaders/dlopen.c'
libtoolize: copying file './loaders/dyld.c'
libtoolize: copying file './loaders/load_add_on.c'
libtoolize: copying file './loaders/loadlibrary.c'
libtoolize: copying file './loaders/preopen.c'
libtoolize: copying file './loaders/shl_load.c'
libtoolize: copying file './lt__alloc.c'
libtoolize: copying file './lt__argz.c'
libtoolize: copying file './lt__dirent.c'
libtoolize: copying file './lt__strl.c'
libtoolize: copying file './lt_dlloader.c'
libtoolize: copying file './lt_error.c'
libtoolize: copying file './ltdl.c'
libtoolize: copying file './ltdl.h'
libtoolize: copying file './slist.c'
./standalone.at:49: : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL;
$CONFIG_SHELL ./configure $configure_options --prefix="$prefix"
--exec-prefix="$prefix" --bindir="$prefix/bin" --libdir="$prefix/lib"
stderr:
stdout:
checking for a BSD-compatible install... /opt/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... armv5tejl-unknown-linux-gnueabi
checking host system type... armv5tejl-unknown-linux-gnueabi
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /opt/arm-none-linux-gnueabi/bin/ld
checking if the linker (/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /opt/bin/nm -B
checking the name lister (/opt/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 32768
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
armv5tejl-unknown-linux-gnueabi format... (cached) func_convert_file_noop
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
toolchain format... (cached) func_convert_file_noop
checking for /opt/arm-none-linux-gnueabi/bin/ld option to reload object
files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /opt/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /opt/bin/dd
checking how to truncate binary pipes... /opt/bin/dd bs=4096 count=1
checking for mt... :
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/opt/arm-none-linux-gnueabi/bin/ld)
supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking what extension is used for runtime loadable modules... .so
checking what variable specifies run-time module search path...
LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
./standalone.at:50: $as_unset LIBTOOL; $as_unset LIBTOOLIZE; $MAKE $target
stderr:
/opt/bin/bash: no: command not found
make: *** [aclocal.m4] Error 127
stdout:
CDPATH="${ZSH_VERSION+.}:" && cd . && no -I m4
./standalone.at:50: exit code was 2, expected 0
124. standalone.at:46: 124. compiling copied libltdl (standalone.at:46):
FAILED (standalone.at:50)
# -*- compilation -*-
125. standalone.at:61: testing installable libltdl ...
./standalone.at:65: $LIBTOOLIZE --copy --ltdl=.
stdout:
libtoolize: putting auxiliary files in '.'.
libtoolize: copying file './compile'
libtoolize: copying file './config.guess'
libtoolize: copying file './config.sub'
libtoolize: copying file './depcomp'
libtoolize: copying file './install-sh'
libtoolize: copying file './missing'
libtoolize: copying file './ltmain.sh'
libtoolize: putting macros in './m4'.
libtoolize: copying file './m4/libtool.m4'
libtoolize: copying file './m4/ltargz.m4'
libtoolize: copying file './m4/ltdl.m4'
libtoolize: copying file './m4/ltoptions.m4'
libtoolize: copying file './m4/ltsugar.m4'
libtoolize: copying file './m4/ltversion.m4'
libtoolize: copying file './m4/lt~obsolete.m4'
libtoolize: putting libltdl files in '.'.
libtoolize: copying file './COPYING.LIB'
libtoolize: creating file './Makefile.am'
libtoolize: copying file './README'
libtoolize: creating file './configure.ac'
libtoolize: creating file './aclocal.m4'
libtoolize: creating file './Makefile.in'
libtoolize: copying file './config-h.in'
libtoolize: creating file './configure'
libtoolize: copying file './libltdl/lt__alloc.h'
libtoolize: copying file './libltdl/lt__argz_.h'
libtoolize: copying file './libltdl/lt__dirent.h'
libtoolize: copying file './libltdl/lt__glibc.h'
libtoolize: copying file './libltdl/lt__private.h'
libtoolize: copying file './libltdl/lt__strl.h'
libtoolize: copying file './libltdl/lt_dlloader.h'
libtoolize: copying file './libltdl/lt_error.h'
libtoolize: copying file './libltdl/lt_system.h'
libtoolize: copying file './libltdl/slist.h'
libtoolize: copying file './loaders/dld_link.c'
libtoolize: copying file './loaders/dlopen.c'
libtoolize: copying file './loaders/dyld.c'
libtoolize: copying file './loaders/load_add_on.c'
libtoolize: copying file './loaders/loadlibrary.c'
libtoolize: copying file './loaders/preopen.c'
libtoolize: copying file './loaders/shl_load.c'
libtoolize: copying file './lt__alloc.c'
libtoolize: copying file './lt__argz.c'
libtoolize: copying file './lt__dirent.c'
libtoolize: copying file './lt__strl.c'
libtoolize: copying file './lt_dlloader.c'
libtoolize: copying file './lt_error.c'
libtoolize: copying file './ltdl.c'
libtoolize: copying file './ltdl.h'
libtoolize: copying file './slist.c'
./standalone.at:66: : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL;
$CONFIG_SHELL ./configure $configure_options --prefix="$prefix"
--exec-prefix="$prefix" --bindir="$prefix/bin" --libdir="$prefix/lib"
--enable-ltdl-install --prefix=$prefix
stderr:
stdout:
checking for a BSD-compatible install... /opt/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... armv5tejl-unknown-linux-gnueabi
checking host system type... armv5tejl-unknown-linux-gnueabi
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /opt/arm-none-linux-gnueabi/bin/ld
checking if the linker (/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /opt/bin/nm -B
checking the name lister (/opt/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 32768
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
armv5tejl-unknown-linux-gnueabi format... (cached) func_convert_file_noop
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
toolchain format... (cached) func_convert_file_noop
checking for /opt/arm-none-linux-gnueabi/bin/ld option to reload object
files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /opt/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /opt/bin/dd
checking how to truncate binary pipes... /opt/bin/dd bs=4096 count=1
checking for mt... :
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/opt/arm-none-linux-gnueabi/bin/ld)
supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking what extension is used for runtime loadable modules... .so
checking what variable specifies run-time module search path...
LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
./standalone.at:67: $as_unset LIBTOOL; $as_unset LIBTOOLIZE; $MAKE $target
stderr:
/opt/bin/bash: no: command not found
make: *** [aclocal.m4] Error 127
stdout:
CDPATH="${ZSH_VERSION+.}:" && cd . && no -I m4
./standalone.at:67: exit code was 2, expected 0
125. standalone.at:61: 125. installable libltdl (standalone.at:61): FAILED
(standalone.at:67)
# -*- compilation -*-
126. standalone.at:79: testing linking libltdl without autotools ...
./standalone.at:82: $LIBTOOLIZE --copy --ltdl
stdout:
libtoolize: putting auxiliary files in 'libltdl'.
libtoolize: copying file 'libltdl/compile'
libtoolize: copying file 'libltdl/config.guess'
libtoolize: copying file 'libltdl/config.sub'
libtoolize: copying file 'libltdl/depcomp'
libtoolize: copying file 'libltdl/install-sh'
libtoolize: copying file 'libltdl/missing'
libtoolize: copying file 'libltdl/ltmain.sh'
libtoolize: putting macros in 'libltdl/m4'.
libtoolize: copying file 'libltdl/m4/libtool.m4'
libtoolize: copying file 'libltdl/m4/ltargz.m4'
libtoolize: copying file 'libltdl/m4/ltdl.m4'
libtoolize: copying file 'libltdl/m4/ltoptions.m4'
libtoolize: copying file 'libltdl/m4/ltsugar.m4'
libtoolize: copying file 'libltdl/m4/ltversion.m4'
libtoolize: copying file 'libltdl/m4/lt~obsolete.m4'
libtoolize: putting libltdl files in 'libltdl'.
libtoolize: copying file 'libltdl/COPYING.LIB'
libtoolize: creating file 'libltdl/Makefile.am'
libtoolize: copying file 'libltdl/README'
libtoolize: creating file 'libltdl/configure.ac'
libtoolize: creating file 'libltdl/aclocal.m4'
libtoolize: creating file 'libltdl/Makefile.in'
libtoolize: copying file 'libltdl/config-h.in'
libtoolize: creating file 'libltdl/configure'
libtoolize: copying file 'libltdl/libltdl/lt__alloc.h'
libtoolize: copying file 'libltdl/libltdl/lt__argz_.h'
libtoolize: copying file 'libltdl/libltdl/lt__dirent.h'
libtoolize: copying file 'libltdl/libltdl/lt__glibc.h'
libtoolize: copying file 'libltdl/libltdl/lt__private.h'
libtoolize: copying file 'libltdl/libltdl/lt__strl.h'
libtoolize: copying file 'libltdl/libltdl/lt_dlloader.h'
libtoolize: copying file 'libltdl/libltdl/lt_error.h'
libtoolize: copying file 'libltdl/libltdl/lt_system.h'
libtoolize: copying file 'libltdl/libltdl/slist.h'
libtoolize: copying file 'libltdl/loaders/dld_link.c'
libtoolize: copying file 'libltdl/loaders/dlopen.c'
libtoolize: copying file 'libltdl/loaders/dyld.c'
libtoolize: copying file 'libltdl/loaders/load_add_on.c'
libtoolize: copying file 'libltdl/loaders/loadlibrary.c'
libtoolize: copying file 'libltdl/loaders/preopen.c'
libtoolize: copying file 'libltdl/loaders/shl_load.c'
libtoolize: copying file 'libltdl/lt__alloc.c'
libtoolize: copying file 'libltdl/lt__argz.c'
libtoolize: copying file 'libltdl/lt__dirent.c'
libtoolize: copying file 'libltdl/lt__strl.c'
libtoolize: copying file 'libltdl/lt_dlloader.c'
libtoolize: copying file 'libltdl/lt_error.c'
libtoolize: copying file 'libltdl/ltdl.c'
libtoolize: copying file 'libltdl/ltdl.h'
libtoolize: copying file 'libltdl/slist.c'
./standalone.at:85: $as_unset LIBTOOL; $as_unset LIBTOOLIZE; $MAKE $target
CC="$CC" LIBTOOLFLAGS="$LIBTOOLFLAGS" CPPFLAGS="$CPPFLAGS"
CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS"
CONFIGURE_OPTIONS="$configure_options"
stderr:
/opt/bin/bash: no: command not found
make[1]: *** [aclocal.m4] Error 127
make: *** [libltdl/libltdlc.la] Error 2
stdout:
cd libltdl && CONFIG_SHELL="/opt/bin/bash" /opt/bin/bash ./configure
--prefix=/nonexistent lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop
checking for a BSD-compatible install... /opt/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... armv5tejl-unknown-linux-gnueabi
checking host system type... armv5tejl-unknown-linux-gnueabi
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /opt/arm-none-linux-gnueabi/bin/ld
checking if the linker (/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /opt/bin/nm -B
checking the name lister (/opt/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 32768
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
armv5tejl-unknown-linux-gnueabi format... (cached) func_convert_file_noop
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
toolchain format... (cached) func_convert_file_noop
checking for /opt/arm-none-linux-gnueabi/bin/ld option to reload object
files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /opt/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /opt/bin/dd
checking how to truncate binary pipes... /opt/bin/dd bs=4096 count=1
checking for mt... :
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/opt/arm-none-linux-gnueabi/bin/ld)
supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking what extension is used for runtime loadable modules... .so
checking what variable specifies run-time module search path...
LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
MAKE='make'; test -n "$MAKE" || MAKE=make; \
cd libltdl && $MAKE CC="gcc" LIBTOOLFLAGS="" \
CPPFLAGS="" CFLAGS="-g -O2" LDFLAGS="" \
CONFIGURE_OPTIONS="--prefix=/nonexistent
lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop"
make[1]: Entering directory
`/root/build/libtool-2.4.6/tests/testsuite.dir/126/libltdl'
CDPATH="${ZSH_VERSION+.}:" && cd . && no -I m4
make[1]: Leaving directory
`/root/build/libtool-2.4.6/tests/testsuite.dir/126/libltdl'
./standalone.at:85: exit code was 2, expected 0
126. standalone.at:79: 126. linking libltdl without autotools
(standalone.at:79): FAILED (standalone.at:85)
# -*- compilation -*-
130. subproject.at:109: testing linking libltdl without autotools ...
libtoolize: putting auxiliary files in 'sub/ltdl'.
libtoolize: copying file 'sub/ltdl/compile'
libtoolize: copying file 'sub/ltdl/config.guess'
libtoolize: copying file 'sub/ltdl/config.sub'
libtoolize: copying file 'sub/ltdl/depcomp'
libtoolize: copying file 'sub/ltdl/install-sh'
libtoolize: copying file 'sub/ltdl/missing'
libtoolize: copying file 'sub/ltdl/ltmain.sh'
libtoolize: putting macros in 'sub/ltdl/m4'.
libtoolize: copying file 'sub/ltdl/m4/libtool.m4'
libtoolize: copying file 'sub/ltdl/m4/ltargz.m4'
libtoolize: copying file 'sub/ltdl/m4/ltdl.m4'
libtoolize: copying file 'sub/ltdl/m4/ltoptions.m4'
libtoolize: copying file 'sub/ltdl/m4/ltsugar.m4'
libtoolize: copying file 'sub/ltdl/m4/ltversion.m4'
libtoolize: copying file 'sub/ltdl/m4/lt~obsolete.m4'
libtoolize: putting libltdl files in 'sub/ltdl'.
libtoolize: copying file 'sub/ltdl/COPYING.LIB'
libtoolize: creating file 'sub/ltdl/Makefile.am'
libtoolize: copying file 'sub/ltdl/README'
libtoolize: creating file 'sub/ltdl/configure.ac'
libtoolize: creating file 'sub/ltdl/aclocal.m4'
libtoolize: creating file 'sub/ltdl/Makefile.in'
libtoolize: copying file 'sub/ltdl/config-h.in'
libtoolize: creating file 'sub/ltdl/configure'
libtoolize: copying file 'sub/ltdl/libltdl/lt__alloc.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt__argz_.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt__dirent.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt__glibc.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt__private.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt__strl.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt_dlloader.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt_error.h'
libtoolize: copying file 'sub/ltdl/libltdl/lt_system.h'
libtoolize: copying file 'sub/ltdl/libltdl/slist.h'
libtoolize: copying file 'sub/ltdl/loaders/dld_link.c'
libtoolize: copying file 'sub/ltdl/loaders/dlopen.c'
libtoolize: copying file 'sub/ltdl/loaders/dyld.c'
libtoolize: copying file 'sub/ltdl/loaders/load_add_on.c'
libtoolize: copying file 'sub/ltdl/loaders/loadlibrary.c'
libtoolize: copying file 'sub/ltdl/loaders/preopen.c'
libtoolize: copying file 'sub/ltdl/loaders/shl_load.c'
libtoolize: copying file 'sub/ltdl/lt__alloc.c'
libtoolize: copying file 'sub/ltdl/lt__argz.c'
libtoolize: copying file 'sub/ltdl/lt__dirent.c'
libtoolize: copying file 'sub/ltdl/lt__strl.c'
libtoolize: copying file 'sub/ltdl/lt_dlloader.c'
libtoolize: copying file 'sub/ltdl/lt_error.c'
libtoolize: copying file 'sub/ltdl/ltdl.c'
libtoolize: copying file 'sub/ltdl/ltdl.h'
libtoolize: copying file 'sub/ltdl/slist.c'
./subproject.at:115: $as_unset LIBTOOL; $as_unset LIBTOOLIZE; $MAKE $target
CC="$CC" LIBTOOLFLAGS="$LIBTOOLFLAGS" CPPFLAGS="$CPPFLAGS"
CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS" SHELL="$SHELL" MAKE="${MAKE-make}"
CONFIGURE_OPTIONS="$configure_options"
stderr:
/opt/bin/bash: no: command not found
make[1]: *** [aclocal.m4] Error 127
make: *** [sub/ltdl/libltdlc.la] Error 2
stdout:
cd sub/ltdl && CONFIG_SHELL="/opt/bin/bash" /opt/bin/bash ./configure
--prefix=/nonexistent lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop
checking for a BSD-compatible install... /opt/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /opt/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... armv5tejl-unknown-linux-gnueabi
checking host system type... armv5tejl-unknown-linux-gnueabi
checking how to print strings... printf
checking for style of include used by make... GNU
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /opt/arm-none-linux-gnueabi/bin/ld
checking if the linker (/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /opt/bin/nm -B
checking the name lister (/opt/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 32768
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
armv5tejl-unknown-linux-gnueabi format... (cached) func_convert_file_noop
checking how to convert armv5tejl-unknown-linux-gnueabi file names to
toolchain format... (cached) func_convert_file_noop
checking for /opt/arm-none-linux-gnueabi/bin/ld option to reload object
files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @FILE support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /opt/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for a working dd... /opt/bin/dd
checking how to truncate binary pipes... /opt/bin/dd bs=4096 count=1
checking for mt... :
checking if : is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... no
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/opt/arm-none-linux-gnueabi/bin/ld)
supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... yes
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking what extension is used for runtime loadable modules... .so
checking what variable specifies run-time module search path...
LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
MAKE='make'; test -n "$MAKE" || MAKE=make; \
cd sub/ltdl && $MAKE CC="gcc" LIBTOOLFLAGS="" \
CPPFLAGS="" CFLAGS="-g -O2" LDFLAGS="" \
CONFIGURE_OPTIONS="--prefix=/nonexistent
lt_cv_to_host_file_cmd=func_convert_file_noop
lt_cv_to_tool_file_cmd=func_convert_file_noop"
make[1]: Entering directory
`/root/build/libtool-2.4.6/tests/testsuite.dir/130/sub/ltdl'
CDPATH="${ZSH_VERSION+.}:" && cd . && no -I m4
make[1]: Leaving directory
`/root/build/libtool-2.4.6/tests/testsuite.dir/130/sub/ltdl'
./subproject.at:115: exit code was 2, expected 0
130. subproject.at:109: 130. linking libltdl without autotools
(subproject.at:109): FAILED (subproject.at:115)
## ------------- ##
## ../config.log ##
## ------------- ##
| This file contains any messages produced by compilers while
| running configure, to aid debugging if configure makes a mistake.
|
| It was created by GNU Libtool configure 2.4.6, which was
| generated by GNU Autoconf 2.69. Invocation command line was
|
| $ ./configure --prefix=/opt
|
| ## --------- ##
| ## Platform. ##
| ## --------- ##
|
| hostname = NASY
| uname -m = armv5tejl
| uname -r = 2.6.24.4
| uname -s = Linux
| uname -v = #1 Mon Aug 5 15:20:10 CST 2013
|
| /usr/bin/uname -p = unknown
| /bin/uname -X = unknown
|
| /bin/arch = unknown
| /usr/bin/arch -k = unknown
| /usr/convex/getsysinfo = unknown
| /usr/bin/hostinfo = unknown
| /bin/machine = unknown
| /usr/bin/oslevel = unknown
| /bin/universe = unknown
|
| PATH: /opt/share/bin
| PATH: /opt/share/sbin
| PATH: /opt/bin
| PATH: /opt/sbin
| PATH: /usr/local/bin
| PATH: /usr/local/sbin
| PATH: /usr/bin
| PATH: /usr/sbin
| PATH: /usr/local/zy-pkgs/bin
| PATH: /bin
| PATH: /sbin
| PATH: /zyxel/sbin
|
|
| ## ----------- ##
| ## Core tests. ##
| ## ----------- ##
|
| configure:2687: checking for GNU M4 that supports accurate traces
| configure:2736: result: /opt/bin/m4
| configure:2739: checking whether /opt/bin/m4 accepts --gnu
| configure:2749: result: yes
| configure:2766: checking how m4 supports trace files
| configure:2776: result: --debugfile
| configure:2803: checking for a BSD-compatible install
| configure:2871: result: /opt/bin/install -c
| configure:2882: checking whether build environment is sane
| configure:2937: result: yes
| configure:3088: checking for a thread-safe mkdir -p
| configure:3127: result: /opt/bin/mkdir -p
| configure:3134: checking for gawk
| configure:3150: found /opt/bin/gawk
| configure:3161: result: gawk
| configure:3172: checking whether make sets $(MAKE)
| configure:3194: result: yes
| configure:3223: checking whether make supports nested variables
| configure:3240: result: yes
| configure:3377: checking whether make supports nested variables
| configure:3394: result: yes
| configure:3419: checking build system type
| configure:3433: result: armv5tejl-unknown-linux-gnueabi
| configure:3453: checking host system type
| configure:3466: result: armv5tejl-unknown-linux-gnueabi
| configure:3493: autobuild project... GNU Libtool
| configure:3499: autobuild revision... 2.4.6
| configure:3504: autobuild hostname... NASY
| configure:3508: autobuild mode... default
| configure:3516: autobuild timestamp... 20160922T193244Z
| configure:3606: checking for gcc
| configure:3622: found /opt/bin/gcc
| configure:3633: result: gcc
| configure:3862: checking for C compiler version
| configure:3871: gcc --version >&5
| gcc (GCC) 4.2.3
| Copyright (C) 2007 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions. There is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
|
| configure:3882: $? = 0
| configure:3871: gcc -v >&5
| Using built-in specs.
| Target: arm-none-linux-gnueabi
| Configured with: ../gcc-4.2/configure --build=i386-pc-linux-gnu
--host=arm-none-linux-gnueabi --target=arm-none-linux-gnueabi --prefix=/opt
--disable-nls --disable-static
--with-as=/home/slug/optware/cs08q1armel/toolchain/arm-2008q1/bin/arm-none-l
inux-gnueabi-as
--with-ld=/home/slug/optware/cs08q1armel/toolchain/arm-2008q1/bin/arm-none-l
inux-gnueabi-ld --enable-languages=c,c++ --disable-multilib --enable-threads
--disable-libmudflap --disable-libssp --disable-libgomp
--disable-libstdcxx-pch --enable-shared --enable-symvers=gnu
--enable-__cxa_atexit
| Thread model: posix
| gcc version 4.2.3
| configure:3882: $? = 0
| configure:3871: gcc -V >&5
| gcc: '-V' option must have argument
| configure:3882: $? = 1
| configure:3871: gcc -qversion >&5
| gcc: unrecognized option '-qversion'
| gcc: no input files
| configure:3882: $? = 1
| configure:3902: checking whether the C compiler works
| configure:3924: gcc conftest.c >&5
| configure:3928: $? = 0
| configure:3976: result: yes
| configure:3979: checking for C compiler default output file name
| configure:3981: result: a.out
| configure:3987: checking for suffix of executables
| configure:3994: gcc -o conftest conftest.c >&5
| configure:3998: $? = 0
| configure:4020: result:
| configure:4042: checking whether we are cross compiling
| configure:4050: gcc -o conftest conftest.c >&5
| configure:4054: $? = 0
| configure:4061: ./conftest
| configure:4065: $? = 0
| configure:4080: result: no
| configure:4085: checking for suffix of object files
| configure:4107: gcc -c conftest.c >&5
| configure:4111: $? = 0
| configure:4132: result: o
| configure:4136: checking whether we are using the GNU C compiler
| configure:4155: gcc -c conftest.c >&5
| configure:4155: $? = 0
| configure:4164: result: yes
| configure:4173: checking whether gcc accepts -g
| configure:4193: gcc -c -g conftest.c >&5
| configure:4193: $? = 0
| configure:4234: result: yes
| configure:4251: checking for gcc option to accept ISO C89
| configure:4314: gcc -c -g -O2 conftest.c >&5
| configure:4314: $? = 0
| configure:4327: result: none needed
| configure:4352: checking whether gcc understands -c and -o together
| configure:4374: gcc -c conftest.c -o conftest2.o
| configure:4377: $? = 0
| configure:4374: gcc -c conftest.c -o conftest2.o
| configure:4377: $? = 0
| configure:4389: result: yes
| configure:4417: checking for style of include used by make
| configure:4445: result: GNU
| configure:4471: checking dependency style of gcc
| configure:4582: result: gcc3
| configure:4603: checking how to run the C preprocessor
| configure:4634: gcc -E conftest.c
| configure:4634: $? = 0
| configure:4648: gcc -E conftest.c
| conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
| configure:4648: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:4673: result: gcc -E
| configure:4693: gcc -E conftest.c
| configure:4693: $? = 0
| configure:4707: gcc -E conftest.c
| conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
| configure:4707: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:4736: checking for grep that handles long lines and -e
| configure:4794: result: /bin/grep
| configure:4799: checking for egrep
| configure:4861: result: /bin/grep -E
| configure:4868: checking for Minix Amsterdam compiler
| configure:4892: result: no
| configure:4944: checking for ar
| configure:4960: found /opt/bin/ar
| configure:4971: result: ar
| configure:5051: checking for ranlib
| configure:5067: found /opt/bin/ranlib
| configure:5078: result: ranlib
| configure:5131: checking how to run the C preprocessor
| configure:5201: result: gcc -E
| configure:5221: gcc -E conftest.c
| configure:5221: $? = 0
| configure:5235: gcc -E conftest.c
| conftest.c:11:28: error: ac_nonexistent.h: No such file or directory
| configure:5235: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:5313: checking how to print strings
| configure:5340: result: printf
| configure:5361: checking for a sed that does not truncate output
| configure:5425: result: /bin/sed
| configure:5443: checking for fgrep
| configure:5505: result: /bin/grep -F
| configure:5540: checking for ld used by gcc
| configure:5607: result: /opt/arm-none-linux-gnueabi/bin/ld
| configure:5614: checking if the linker
(/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld
| configure:5629: result: yes
| configure:5641: checking for BSD- or MS-compatible name lister (nm)
| configure:5695: result: /opt/bin/nm -B
| configure:5825: checking the name lister (/opt/bin/nm -B) interface
| configure:5832: gcc -c -g -O2 conftest.c >&5
| configure:5835: /opt/bin/nm -B "conftest.o"
| configure:5838: output
| 00000000 B some_variable
| configure:5845: result: BSD nm
| configure:5848: checking whether ln -s works
| configure:5852: result: yes
| configure:5860: checking the maximum length of command line arguments
| configure:5991: result: 32768
| configure:6039: checking how to convert armv5tejl-unknown-linux-gnueabi
file names to armv5tejl-unknown-linux-gnueabi format
| configure:6079: result: func_convert_file_noop
| configure:6086: checking how to convert armv5tejl-unknown-linux-gnueabi
file names to toolchain format
| configure:6106: result: func_convert_file_noop
| configure:6113: checking for /opt/arm-none-linux-gnueabi/bin/ld option to
reload object files
| configure:6120: result: -r
| configure:6194: checking for objdump
| configure:6210: found /opt/bin/objdump
| configure:6221: result: objdump
| configure:6250: checking how to recognize dependent libraries
| configure:6450: result: pass_all
| configure:6535: checking for dlltool
| configure:6565: result: no
| configure:6592: checking how to associate runtime and link libraries
| configure:6619: result: printf %s\n
| configure:6743: checking for archiver @FILE support
| configure:6760: gcc -c -g -O2 conftest.c >&5
| configure:6760: $? = 0
| configure:6763: ar cru libconftest.a @conftest.lst >&5
| configure:6766: $? = 0
| configure:6771: ar cru libconftest.a @conftest.lst >&5
| ar: conftest.o: No such file or directory
| configure:6774: $? = 1
| configure:6786: result: @
| configure:6844: checking for strip
| configure:6860: found /opt/bin/strip
| configure:6871: result: strip
| configure:6943: checking for ranlib
| configure:6970: result: ranlib
| configure:7072: checking command to parse /opt/bin/nm -B output from gcc
object
| configure:7225: gcc -c -g -O2 conftest.c >&5
| configure:7228: $? = 0
| configure:7232: /opt/bin/nm -B conftest.o \| sed -n -e 's/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'
| sed '/ __gnu_lto/d' \> conftest.nm
| configure:7235: $? = 0
| configure:7301: gcc -o conftest -g -O2 conftest.c conftstm.o >&5
| configure:7304: $? = 0
| configure:7342: result: ok
| configure:7389: checking for sysroot
| configure:7419: result: no
| configure:7426: checking for a working dd
| configure:7464: result: /opt/bin/dd
| configure:7468: checking how to truncate binary pipes
| configure:7483: result: /opt/bin/dd bs=4096 count=1
| configure:7812: checking for mt
| configure:7842: result: no
| configure:7862: checking if : is a manifest tool
| configure:7868: : '-?'
| configure:7876: result: no
| configure:8548: checking for ANSI C header files
| configure:8568: gcc -c -g -O2 conftest.c >&5
| configure:8568: $? = 0
| configure:8641: gcc -o conftest -g -O2 conftest.c >&5
| configure:8641: $? = 0
| configure:8641: ./conftest
| configure:8641: $? = 0
| configure:8652: result: yes
| configure:8665: checking for sys/types.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for sys/stat.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for stdlib.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for string.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for memory.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for strings.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for inttypes.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for stdint.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8665: checking for unistd.h
| configure:8665: gcc -c -g -O2 conftest.c >&5
| configure:8665: $? = 0
| configure:8665: result: yes
| configure:8679: checking for dlfcn.h
| configure:8679: gcc -c -g -O2 conftest.c >&5
| configure:8679: $? = 0
| configure:8679: result: yes
| configure:9232: checking for objdir
| configure:9247: result: .libs
| configure:9511: checking if gcc supports -fno-rtti -fno-exceptions
| configure:9529: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
| cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but
not for C
| configure:9533: $? = 0
| configure:9546: result: no
| configure:9904: checking for gcc option to produce PIC
| configure:9911: result: -fPIC -DPIC
| configure:9919: checking if gcc PIC flag -fPIC -DPIC works
| configure:9937: gcc -c -g -O2 -fPIC -DPIC -DPIC conftest.c >&5
| configure:9941: $? = 0
| configure:9954: result: yes
| configure:9983: checking if gcc static flag -static works
| configure:10011: result: no
| configure:10026: checking if gcc supports -c -o file.o
| configure:10047: gcc -c -g -O2 -o out/conftest2.o conftest.c >&5
| configure:10051: $? = 0
| configure:10073: result: yes
| configure:10081: checking if gcc supports -c -o file.o
| configure:10128: result: yes
| configure:10161: checking whether the gcc linker
(/opt/arm-none-linux-gnueabi/bin/ld) supports shared libraries
| configure:11420: result: yes
| configure:11457: checking whether -lc should be explicitly linked in
| configure:11465: gcc -c -g -O2 conftest.c >&5
| configure:11468: $? = 0
| configure:11483: gcc -shared -fPIC -DPIC conftest.o -v -Wl,-soname
-Wl,conftest -o conftest 2\>\&1 \| /bin/grep -lc \>/dev/null 2\>\&1
| configure:11486: $? = 0
| configure:11500: result: no
| configure:11660: checking dynamic linker characteristics
| configure:12241: gcc -o conftest -g -O2 -Wl,-rpath -Wl,/foo conftest.c
>&5
| configure:12241: $? = 0
| configure:12478: result: GNU/Linux ld.so
| configure:12600: checking how to hardcode library paths into programs
| configure:12625: result: immediate
| configure:12727: checking for shl_load
| configure:12727: gcc -o conftest -g -O2 conftest.c >&5
| /i-data/d752080c/.tmp/cctm653G.o: In function `main':
| /root/build/libtool-2.4.6/conftest.c:57: undefined reference to `shl_load'
| collect2: ld returned 1 exit status
| configure:12727: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | /* end confdefs.h. */
| | /* Define shl_load to an innocuous variant, in case <limits.h> declares
shl_load.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define shl_load innocuous_shl_load
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char shl_load (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef shl_load
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char shl_load ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_shl_load || defined __stub___shl_load
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return shl_load ();
| | ;
| | return 0;
| | }
| configure:12727: result: no
| configure:12731: checking for shl_load in -ldld
| configure:12756: gcc -o conftest -g -O2 conftest.c -ldld >&5
|
/opt/lib/gcc/arm-none-linux-gnueabi/4.2.3/../../../../arm-none-linux-gnueabi
/bin/ld: cannot find -ldld
| collect2: ld returned 1 exit status
| configure:12756: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | /* end confdefs.h. */
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char shl_load ();
| | int
| | main ()
| | {
| | return shl_load ();
| | ;
| | return 0;
| | }
| configure:12765: result: no
| configure:12770: checking for dlopen
| configure:12770: gcc -o conftest -g -O2 conftest.c >&5
| /i-data/d752080c/.tmp/ccb2gDg1.o: In function `main':
| /root/build/libtool-2.4.6/conftest.c:57: undefined reference to `dlopen'
| collect2: ld returned 1 exit status
| configure:12770: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | /* end confdefs.h. */
| | /* Define dlopen to an innocuous variant, in case <limits.h> declares
dlopen.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define dlopen innocuous_dlopen
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char dlopen (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef dlopen
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char dlopen ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_dlopen || defined __stub___dlopen
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return dlopen ();
| | ;
| | return 0;
| | }
| configure:12770: result: no
| configure:12774: checking for dlopen in -ldl
| configure:12799: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:12799: $? = 0
| configure:12808: result: yes
| configure:12927: checking whether a program can dlopen itself
| configure:13007: gcc -o conftest -g -O2 -DHAVE_DLFCN_H
-Wl,--export-dynamic conftest.c -ldl >&5
| configure:13010: $? = 0
| configure:13028: result: yes
| configure:13033: checking whether a statically linked program can dlopen
itself
| configure:13113: gcc -o conftest -g -O2 -DHAVE_DLFCN_H
-Wl,--export-dynamic conftest.c -ldl >&5
| configure:13116: $? = 0
| configure:13134: result: yes
| configure:13173: checking whether stripping libraries is possible
| configure:13178: result: yes
| configure:13213: checking if libtool supports shared libraries
| configure:13215: result: yes
| configure:13218: checking whether to build shared libraries
| configure:13243: result: yes
| configure:13246: checking whether to build static libraries
| configure:13250: result: yes
| configure:13288: checking what extension is used for runtime loadable
modules
| configure:13300: result: .so
| configure:13324: checking what variable specifies run-time module search
path
| configure:13331: result: LD_LIBRARY_PATH
| configure:13341: checking for the default library search path
| configure:13348: result: /lib /usr/lib
| configure:13379: checking for library containing dlopen
| configure:13410: gcc -o conftest -g -O2 conftest.c >&5
| /i-data/d752080c/.tmp/ccON7BpQ.o: In function `main':
| /root/build/libtool-2.4.6/conftest.c:37: undefined reference to `dlopen'
| collect2: ld returned 1 exit status
| configure:13410: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | /* end confdefs.h. */
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char dlopen ();
| | int
| | main ()
| | {
| | return dlopen ();
| | ;
| | return 0;
| | }
| configure:13410: gcc -o conftest -g -O2 conftest.c -ldl >&5
| configure:13410: $? = 0
| configure:13427: result: -ldl
| configure:13517: checking for dlerror
| configure:13517: gcc -o conftest -g -O2 conftest.c -ldl -ldl >&5
| configure:13517: $? = 0
| configure:13517: result: yes
| configure:13531: checking for shl_load
| configure:13531: result: no
| configure:13538: checking for shl_load in -ldld
| configure:13572: result: no
| configure:13618: checking for dld_link in -ldld
| configure:13643: gcc -o conftest -g -O2 conftest.c -ldld -ldl >&5
|
/opt/lib/gcc/arm-none-linux-gnueabi/4.2.3/../../../../arm-none-linux-gnueabi
/bin/ld: cannot find -ldld
| collect2: ld returned 1 exit status
| configure:13643: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | /* end confdefs.h. */
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char dld_link ();
| | int
| | main ()
| | {
| | return dld_link ();
| | ;
| | return 0;
| | }
| configure:13652: result: no
| configure:13687: checking for _ prefix in compiled symbols
| configure:13697: gcc -c -g -O2 conftest.c >&5
| configure:13700: $? = 0
| configure:13704: /opt/bin/nm -B conftest.o \| sed -n -e 's/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
\2/p' | sed '/ __gnu_lto/d' \> conftest.nm
| configure:13707: $? = 0
| configure:13729: result: no
| configure:13846: checking whether deplibs are loaded by dlopen
| configure:13943: result: yes
| configure:13954: checking for argz.h
| configure:13954: gcc -c -g -O2 conftest.c >&5
| configure:13954: $? = 0
| configure:13954: result: yes
| configure:13966: checking for error_t
| configure:13966: gcc -c -g -O2 conftest.c >&5
| configure:13966: $? = 0
| configure:13966: gcc -c -g -O2 conftest.c >&5
| conftest.c: In function 'main':
| conftest.c:37: error: expected expression before ')' token
| configure:13966: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | /* end confdefs.h. */
| | #if defined(HAVE_ARGZ_H)
| | # include <argz.h>
| | #endif
| |
| | int
| | main ()
| | {
| | if (sizeof ((error_t)))
| | return 0;
| | ;
| | return 0;
| | }
| configure:13966: result: yes
| configure:13992: checking for argz_add
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:13992: checking for argz_append
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:13992: checking for argz_count
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:13992: checking for argz_create_sep
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:13992: checking for argz_insert
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:13992: checking for argz_next
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:13992: checking for argz_stringify
| configure:13992: gcc -o conftest -g -O2 conftest.c >&5
| configure:13992: $? = 0
| configure:13992: result: yes
| configure:14010: checking if argz actually works
| configure:14041: result: yes
| configure:14060: checking whether libtool supports -dlopen/-dlpreopen
| configure:14072: result: yes
| configure:14125: checking for unistd.h
| configure:14125: result: yes
| configure:14125: checking for dl.h
| configure:14125: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:16: error: dl.h: No such file or directory
| configure:14125: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <dl.h>
| configure:14125: result: no
| configure:14125: checking for sys/dl.h
| configure:14125: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:20: error: sys/dl.h: No such file or directory
| configure:14125: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <sys/dl.h>
| configure:14125: result: no
| configure:14125: checking for dld.h
| configure:14125: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:17: error: dld.h: No such file or directory
| configure:14125: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <dld.h>
| configure:14125: result: no
| configure:14125: checking for mach-o/dyld.h
| configure:14125: gcc -c -g -O2 conftest.c >&5
| conftest.c:75:25: error: mach-o/dyld.h: No such file or directory
| configure:14125: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | /* end confdefs.h. */
| | #include <stdio.h>
| | #ifdef HAVE_SYS_TYPES_H
| | # include <sys/types.h>
| | #endif
| | #ifdef HAVE_SYS_STAT_H
| | # include <sys/stat.h>
| | #endif
| | #ifdef STDC_HEADERS
| | # include <stdlib.h>
| | # include <stddef.h>
| | #else
| | # ifdef HAVE_STDLIB_H
| | # include <stdlib.h>
| | # endif
| | #endif
| | #ifdef HAVE_STRING_H
| | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H
| | # include <memory.h>
| | # endif
| | # include <string.h>
| | #endif
| | #ifdef HAVE_STRINGS_H
| | # include <strings.h>
| | #endif
| | #ifdef HAVE_INTTYPES_H
| | # include <inttypes.h>
| | #endif
| | #ifdef HAVE_STDINT_H
| | # include <stdint.h>
| | #endif
| | #ifdef HAVE_UNISTD_H
| | # include <unistd.h>
| | #endif
| |
| | #include <mach-o/dyld.h>
| configure:14125: result: no
| configure:14125: checking for dirent.h
| configure:14125: gcc -c -g -O2 conftest.c >&5
| configure:14125: $? = 0
| configure:14125: result: yes
| configure:14140: checking for closedir
| configure:14140: gcc -o conftest -g -O2 conftest.c >&5
| configure:14140: $? = 0
| configure:14140: result: yes
| configure:14140: checking for opendir
| configure:14140: gcc -o conftest -g -O2 conftest.c >&5
| configure:14140: $? = 0
| configure:14140: result: yes
| configure:14140: checking for readdir
| configure:14140: gcc -o conftest -g -O2 conftest.c >&5
| configure:14140: $? = 0
| configure:14140: result: yes
| configure:14159: checking for strlcat
| configure:14159: gcc -o conftest -g -O2 conftest.c >&5
| /i-data/d752080c/.tmp/ccnZish7.o: In function `main':
| /root/build/libtool-2.4.6/conftest.c:79: undefined reference to `strlcat'
| collect2: ld returned 1 exit status
| configure:14159: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | /* end confdefs.h. */
| | /* Define strlcat to an innocuous variant, in case <limits.h> declares
strlcat.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define strlcat innocuous_strlcat
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char strlcat (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef strlcat
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char strlcat ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_strlcat || defined __stub___strlcat
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return strlcat ();
| | ;
| | return 0;
| | }
| configure:14159: result: no
| configure:14159: checking for strlcpy
| configure:14159: gcc -o conftest -g -O2 conftest.c >&5
| /i-data/d752080c/.tmp/cc2YcYpa.o: In function `main':
| /root/build/libtool-2.4.6/conftest.c:79: undefined reference to `strlcpy'
| collect2: ld returned 1 exit status
| configure:14159: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | /* end confdefs.h. */
| | /* Define strlcpy to an innocuous variant, in case <limits.h> declares
strlcpy.
| | For example, HP-UX 11i <limits.h> declares gettimeofday. */
| | #define strlcpy innocuous_strlcpy
| |
| | /* System header to define __stub macros and hopefully few prototypes,
| | which can conflict with char strlcpy (); below.
| | Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
| | <limits.h> exists even on freestanding compilers. */
| |
| | #ifdef __STDC__
| | # include <limits.h>
| | #else
| | # include <assert.h>
| | #endif
| |
| | #undef strlcpy
| |
| | /* Override any GCC internal prototype to avoid an error.
| | Use char because int might match the return type of a GCC
| | builtin and then its argument prototype would still apply. */
| | #ifdef __cplusplus
| | extern "C"
| | #endif
| | char strlcpy ();
| | /* The GNU C library defines this for functions which it implements
| | to always fail with ENOSYS. Some functions are actually named
| | something starting with __ and the normal name is an alias. */
| | #if defined __stub_strlcpy || defined __stub___strlcpy
| | choke me
| | #endif
| |
| | int
| | main ()
| | {
| | return strlcpy ();
| | ;
| | return 0;
| | }
| configure:14159: result: no
| configure:14254: checking for g++
| configure:14270: found /opt/bin/g++
| configure:14281: result: g++
| configure:14308: checking for C++ compiler version
| configure:14317: g++ --version >&5
| g++ (GCC) 4.2.3
| Copyright (C) 2007 Free Software Foundation, Inc.
| This is free software; see the source for copying conditions. There is NO
| warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
|
| configure:14328: $? = 0
| configure:14317: g++ -v >&5
| Using built-in specs.
| Target: arm-none-linux-gnueabi
| Configured with: ../gcc-4.2/configure --build=i386-pc-linux-gnu
--host=arm-none-linux-gnueabi --target=arm-none-linux-gnueabi --prefix=/opt
--disable-nls --disable-static
--with-as=/home/slug/optware/cs08q1armel/toolchain/arm-2008q1/bin/arm-none-l
inux-gnueabi-as
--with-ld=/home/slug/optware/cs08q1armel/toolchain/arm-2008q1/bin/arm-none-l
inux-gnueabi-ld --enable-languages=c,c++ --disable-multilib --enable-threads
--disable-libmudflap --disable-libssp --disable-libgomp
--disable-libstdcxx-pch --enable-shared --enable-symvers=gnu
--enable-__cxa_atexit
| Thread model: posix
| gcc version 4.2.3
| configure:14328: $? = 0
| configure:14317: g++ -V >&5
| g++: '-V' option must have argument
| configure:14328: $? = 1
| configure:14317: g++ -qversion >&5
| g++: unrecognized option '-qversion'
| g++: no input files
| configure:14328: $? = 1
| configure:14332: checking whether we are using the GNU C++ compiler
| configure:14351: g++ -c conftest.cpp >&5
| configure:14351: $? = 0
| configure:14360: result: yes
| configure:14369: checking whether g++ accepts -g
| configure:14389: g++ -c -g conftest.cpp >&5
| configure:14389: $? = 0
| configure:14430: result: yes
| configure:14455: checking dependency style of g++
| configure:14566: result: gcc3
| configure:14600: checking how to run the C++ preprocessor
| configure:14627: g++ -E conftest.cpp
| configure:14627: $? = 0
| configure:14641: g++ -E conftest.cpp
| conftest.cpp:47:28: error: ac_nonexistent.h: No such file or directory
| configure:14641: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | #define LT_LIBEXT "a"
| | #define LT_LIBPREFIX "lib"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:14666: result: g++ -E
| configure:14686: g++ -E conftest.cpp
| configure:14686: $? = 0
| configure:14700: g++ -E conftest.cpp
| conftest.cpp:47:28: error: ac_nonexistent.h: No such file or directory
| configure:14700: $? = 1
| configure: failed program was:
| | /* confdefs.h */
| | #define PACKAGE_NAME "GNU Libtool"
| | #define PACKAGE_TARNAME "libtool"
| | #define PACKAGE_VERSION "2.4.6"
| | #define PACKAGE_STRING "GNU Libtool 2.4.6"
| | #define PACKAGE_BUGREPORT "address@hidden"
| | #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| | #define PACKAGE "libtool"
| | #define VERSION "2.4.6"
| | #define STDC_HEADERS 1
| | #define HAVE_SYS_TYPES_H 1
| | #define HAVE_SYS_STAT_H 1
| | #define HAVE_STDLIB_H 1
| | #define HAVE_STRING_H 1
| | #define HAVE_MEMORY_H 1
| | #define HAVE_STRINGS_H 1
| | #define HAVE_INTTYPES_H 1
| | #define HAVE_STDINT_H 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DLFCN_H 1
| | #define LT_OBJDIR ".libs/"
| | #define LT_MODULE_EXT ".so"
| | #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| | #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| | #define HAVE_LIBDL 1
| | #define HAVE_DLERROR 1
| | #define HAVE_LIBDLLOADER 1
| | #define HAVE_ARGZ_H 1
| | #define HAVE_ERROR_T 1
| | #define HAVE_ARGZ_ADD 1
| | #define HAVE_ARGZ_APPEND 1
| | #define HAVE_ARGZ_COUNT 1
| | #define HAVE_ARGZ_CREATE_SEP 1
| | #define HAVE_ARGZ_INSERT 1
| | #define HAVE_ARGZ_NEXT 1
| | #define HAVE_ARGZ_STRINGIFY 1
| | #define HAVE_WORKING_ARGZ 1
| | #define HAVE_PRELOADED_SYMBOLS 1
| | #define HAVE_UNISTD_H 1
| | #define HAVE_DIRENT_H 1
| | #define HAVE_CLOSEDIR 1
| | #define HAVE_OPENDIR 1
| | #define HAVE_READDIR 1
| | #define LT_LIBEXT "a"
| | #define LT_LIBPREFIX "lib"
| | /* end confdefs.h. */
| | #include <ac_nonexistent.h>
| configure:14862: checking for ld used by g++
| configure:14929: result: /opt/arm-none-linux-gnueabi/bin/ld
| configure:14936: checking if the linker
(/opt/arm-none-linux-gnueabi/bin/ld) is GNU ld
| configure:14951: result: yes
| configure:15006: checking whether the g++ linker
(/opt/arm-none-linux-gnueabi/bin/ld) supports shared libraries
| configure:16079: result: yes
| configure:16115: g++ -c -g -O2 conftest.cpp >&5
| configure:16118: $? = 0
| configure:16599: checking for g++ option to produce PIC
| configure:16606: result: -fPIC -DPIC
| configure:16614: checking if g++ PIC flag -fPIC -DPIC works
| configure:16632: g++ -c -g -O2 -fPIC -DPIC -DPIC conftest.cpp >&5
| configure:16636: $? = 0
| configure:16649: result: yes
| configure:16672: checking if g++ static flag -static works
| configure:16700: result: no
| configure:16712: checking if g++ supports -c -o file.o
| configure:16733: g++ -c -g -O2 -o out/conftest2.o conftest.cpp >&5
| configure:16737: $? = 0
| configure:16759: result: yes
| configure:16764: checking if g++ supports -c -o file.o
| configure:16811: result: yes
| configure:16841: checking whether the g++ linker
(/opt/arm-none-linux-gnueabi/bin/ld) supports shared libraries
| configure:16881: result: yes
| configure:17022: checking dynamic linker characteristics
| configure:17767: result: GNU/Linux ld.so
| configure:17832: checking how to hardcode library paths into programs
| configure:17857: result: immediate
| configure:17950: checking for g77
| configure:17980: result: no
| configure:17950: checking for xlf
| configure:17980: result: no
| configure:17950: checking for f77
| configure:17980: result: no
| configure:17950: checking for frt
| configure:17980: result: no
| configure:17950: checking for pgf77
| configure:17980: result: no
| configure:17950: checking for cf77
| configure:17980: result: no
| configure:17950: checking for fort77
| configure:17980: result: no
| configure:17950: checking for fl32
| configure:17980: result: no
| configure:17950: checking for af77
| configure:17980: result: no
| configure:17950: checking for xlf90
| configure:17980: result: no
| configure:17950: checking for f90
| configure:17980: result: no
| configure:17950: checking for pgf90
| configure:17980: result: no
| configure:17950: checking for pghpf
| configure:17980: result: no
| configure:17950: checking for epcf90
| configure:17980: result: no
| configure:17950: checking for gfortran
| configure:17980: result: no
| configure:17950: checking for g95
| configure:17980: result: no
| configure:17950: checking for xlf95
| configure:17980: result: no
| configure:17950: checking for f95
| configure:17980: result: no
| configure:17950: checking for fort
| configure:17980: result: no
| configure:17950: checking for ifort
| configure:17980: result: no
| configure:17950: checking for ifc
| configure:17980: result: no
| configure:17950: checking for efc
| configure:17980: result: no
| configure:17950: checking for pgfortran
| configure:17980: result: no
| configure:17950: checking for pgf95
| configure:17980: result: no
| configure:17950: checking for lf95
| configure:17980: result: no
| configure:17950: checking for ftn
| configure:17980: result: no
| configure:17950: checking for nagfor
| configure:17980: result: no
| configure:18003: checking for Fortran 77 compiler version
| configure:18012: --version >&5
| ./configure: line 18014: --version: command not found
| configure:18023: $? = 127
| configure:18012: -v >&5
| ./configure: line 18014: -v: command not found
| configure:18023: $? = 127
| configure:18012: -V >&5
| ./configure: line 18014: -V: command not found
| configure:18023: $? = 127
| configure:18012: -qversion >&5
| ./configure: line 18014: -qversion: command not found
| configure:18023: $? = 127
| configure:18032: checking whether we are using the GNU Fortran 77 compiler
| configure:18045: -c conftest.F >&5
| ./configure: line 2092: -c: command not found
| configure:18045: $? = 127
| configure: failed program was:
| | program main
| | #ifndef __GNUC__
| | choke me
| | #endif
| |
| | end
| configure:18054: result: no
| configure:18060: checking whether accepts -g
| configure:18071: -c -g conftest.f >&5
| ./configure: line 2092: -c: command not found
| configure:18071: $? = 127
| configure: failed program was:
| | program main
| |
| | end
| configure:18079: result: no
| configure:21103: checking for gfortran
| configure:21133: result: no
| configure:21103: checking for g95
| configure:21133: result: no
| configure:21103: checking for xlf95
| configure:21133: result: no
| configure:21103: checking for f95
| configure:21133: result: no
| configure:21103: checking for fort
| configure:21133: result: no
| configure:21103: checking for ifort
| configure:21133: result: no
| configure:21103: checking for ifc
| configure:21133: result: no
| configure:21103: checking for efc
| configure:21133: result: no
| configure:21103: checking for pgfortran
| configure:21133: result: no
| configure:21103: checking for pgf95
| configure:21133: result: no
| configure:21103: checking for lf95
| configure:21133: result: no
| configure:21103: checking for ftn
| configure:21133: result: no
| configure:21103: checking for nagfor
| configure:21133: result: no
| configure:21103: checking for xlf90
| configure:21133: result: no
| configure:21103: checking for f90
| configure:21133: result: no
| configure:21103: checking for pgf90
| configure:21133: result: no
| configure:21103: checking for pghpf
| configure:21133: result: no
| configure:21103: checking for epcf90
| configure:21133: result: no
| configure:21103: checking for g77
| configure:21133: result: no
| configure:21103: checking for xlf
| configure:21133: result: no
| configure:21103: checking for f77
| configure:21133: result: no
| configure:21103: checking for frt
| configure:21133: result: no
| configure:21103: checking for pgf77
| configure:21133: result: no
| configure:21103: checking for cf77
| configure:21133: result: no
| configure:21103: checking for fort77
| configure:21133: result: no
| configure:21103: checking for fl32
| configure:21133: result: no
| configure:21103: checking for af77
| configure:21133: result: no
| configure:21156: checking for Fortran compiler version
| configure:21165: --version >&5
| ./configure: line 21167: --version: command not found
| configure:21176: $? = 127
| configure:21165: -v >&5
| ./configure: line 21167: -v: command not found
| configure:21176: $? = 127
| configure:21165: -V >&5
| ./configure: line 21167: -V: command not found
| configure:21176: $? = 127
| configure:21165: -qversion >&5
| ./configure: line 21167: -qversion: command not found
| configure:21176: $? = 127
| configure:21185: checking whether we are using the GNU Fortran compiler
| configure:21198: -c conftest.F >&5
| ./configure: line 2176: -c: command not found
| configure:21198: $? = 127
| configure: failed program was:
| | program main
| | #ifndef __GNUC__
| | choke me
| | #endif
| |
| | end
| configure:21207: result: no
| configure:21213: checking whether accepts -g
| configure:21224: -c -g conftest.f >&5
| ./configure: line 2176: -c: command not found
| configure:21224: $? = 127
| configure: failed program was:
| | program main
| |
| | end
| configure:21232: result: no
| configure:24394: checking for gccgo
| configure:24424: result: no
| configure:26620: checking for gcj
| configure:26650: result: no
| configure:28847: checking for windres
| configure:28877: result: no
| configure:29177: checking that generated files are newer than configure
| configure:29183: result: done
| configure:29257: creating ./config.status
|
| ## ---------------------- ##
| ## Running config.status. ##
| ## ---------------------- ##
|
| This file was extended by GNU Libtool config.status 2.4.6, which was
| generated by GNU Autoconf 2.69. Invocation command line was
|
| CONFIG_FILES =
| CONFIG_HEADERS =
| CONFIG_LINKS =
| CONFIG_COMMANDS =
| $ ./config.status
|
| on NASY
|
| config.status:1483: creating Makefile
| config.status:1483: creating config.h
| config.status:1743: executing tests/atconfig commands
| config.status:1743: executing depfiles commands
| config.status:1743: executing libtool commands
|
| ## ---------------- ##
| ## Cache variables. ##
| ## ---------------- ##
|
| ac_cv_build=armv5tejl-unknown-linux-gnueabi
| ac_cv_c_compiler_gnu=yes
| ac_cv_cxx_compiler_gnu=yes
| ac_cv_env_CCC_set=
| ac_cv_env_CCC_value=
| ac_cv_env_CC_set=
| ac_cv_env_CC_value=
| ac_cv_env_CFLAGS_set=
| ac_cv_env_CFLAGS_value=
| ac_cv_env_CPPFLAGS_set=
| ac_cv_env_CPPFLAGS_value=
| ac_cv_env_CPP_set=
| ac_cv_env_CPP_value=
| ac_cv_env_CXXCPP_set=
| ac_cv_env_CXXCPP_value=
| ac_cv_env_CXXFLAGS_set=
| ac_cv_env_CXXFLAGS_value=
| ac_cv_env_CXX_set=
| ac_cv_env_CXX_value=
| ac_cv_env_F77_set=
| ac_cv_env_F77_value=
| ac_cv_env_FCFLAGS_set=
| ac_cv_env_FCFLAGS_value=
| ac_cv_env_FC_set=
| ac_cv_env_FC_value=
| ac_cv_env_FFLAGS_set=
| ac_cv_env_FFLAGS_value=
| ac_cv_env_LDFLAGS_set=
| ac_cv_env_LDFLAGS_value=
| ac_cv_env_LIBS_set=
| ac_cv_env_LIBS_value=
| ac_cv_env_LT_SYS_LIBRARY_PATH_set=
| ac_cv_env_LT_SYS_LIBRARY_PATH_value=
| ac_cv_env_M4_set=
| ac_cv_env_M4_value=
| ac_cv_env_build_alias_set=
| ac_cv_env_build_alias_value=
| ac_cv_env_host_alias_set=
| ac_cv_env_host_alias_value=
| ac_cv_env_target_alias_set=
| ac_cv_env_target_alias_value=
| ac_cv_f77_compiler_gnu=no
| ac_cv_fc_compiler_gnu=no
| ac_cv_func_argz_add=yes
| ac_cv_func_argz_append=yes
| ac_cv_func_argz_count=yes
| ac_cv_func_argz_create_sep=yes
| ac_cv_func_argz_insert=yes
| ac_cv_func_argz_next=yes
| ac_cv_func_argz_stringify=yes
| ac_cv_func_closedir=yes
| ac_cv_func_dlerror=yes
| ac_cv_func_dlopen=no
| ac_cv_func_opendir=yes
| ac_cv_func_readdir=yes
| ac_cv_func_shl_load=no
| ac_cv_func_strlcat=no
| ac_cv_func_strlcpy=no
| ac_cv_header_argz_h=yes
| ac_cv_header_dirent_h=yes
| ac_cv_header_dl_h=no
| ac_cv_header_dld_h=no
| ac_cv_header_dlfcn_h=yes
| ac_cv_header_inttypes_h=yes
| ac_cv_header_mach_o_dyld_h=no
| ac_cv_header_memory_h=yes
| ac_cv_header_stdc=yes
| ac_cv_header_stdint_h=yes
| ac_cv_header_stdlib_h=yes
| ac_cv_header_string_h=yes
| ac_cv_header_strings_h=yes
| ac_cv_header_sys_dl_h=no
| ac_cv_header_sys_stat_h=yes
| ac_cv_header_sys_types_h=yes
| ac_cv_header_unistd_h=yes
| ac_cv_host=armv5tejl-unknown-linux-gnueabi
| ac_cv_lib_dl_dlopen=yes
| ac_cv_lib_dld_dld_link=no
| ac_cv_lib_dld_shl_load=no
| ac_cv_objext=o
| ac_cv_path_EGREP='/bin/grep -E'
| ac_cv_path_FGREP='/bin/grep -F'
| ac_cv_path_GREP=/bin/grep
| ac_cv_path_M4=/opt/bin/m4
| ac_cv_path_SED=/bin/sed
| ac_cv_path_install='/opt/bin/install -c'
| ac_cv_path_lt_DD=/opt/bin/dd
| ac_cv_path_mkdir=/opt/bin/mkdir
| ac_cv_prog_AWK=gawk
| ac_cv_prog_CPP='gcc -E'
| ac_cv_prog_CXXCPP='g++ -E'
| ac_cv_prog_ac_ct_AR=ar
| ac_cv_prog_ac_ct_CC=gcc
| ac_cv_prog_ac_ct_CXX=g++
| ac_cv_prog_ac_ct_OBJDUMP=objdump
| ac_cv_prog_ac_ct_RANLIB=ranlib
| ac_cv_prog_ac_ct_STRIP=strip
| ac_cv_prog_cc_c89=
| ac_cv_prog_cc_g=yes
| ac_cv_prog_cxx_g=yes
| ac_cv_prog_f77_g=no
| ac_cv_prog_fc_g=no
| ac_cv_prog_gnu_m4_debugfile=--debugfile
| ac_cv_prog_gnu_m4_gnu=yes
| ac_cv_prog_make_make_set=yes
| ac_cv_search_dlopen=-ldl
| ac_cv_type_error_t=yes
| am_cv_CC_dependencies_compiler_type=gcc3
| am_cv_CXX_dependencies_compiler_type=gcc3
| am_cv_make_support_nested_variables=yes
| am_cv_prog_cc_c_o=yes
| gl_cv_c_amsterdam_compiler=no
| libltdl_cv_lib_dl_dlopen=yes
| libltdl_cv_preloaded_symbols=yes
| libltdl_cv_shlibext=.so
| libltdl_cv_shrext=.so
| lt_cv_ar_at_file=@
| lt_cv_archive_cmds_need_lc=no
| lt_cv_deplibs_check_method=pass_all
| lt_cv_dlopen=dlopen
| lt_cv_dlopen_libs=-ldl
| lt_cv_dlopen_self=yes
| lt_cv_dlopen_self_static=yes
| lt_cv_file_magic_cmd='$MAGIC_CMD'
| lt_cv_file_magic_test_file=
| lt_cv_ld_reload_flag=-r
| lt_cv_module_path_var=LD_LIBRARY_PATH
| lt_cv_nm_interface='BSD nm'
| lt_cv_objdir=.libs
| lt_cv_path_LD=/opt/arm-none-linux-gnueabi/bin/ld
| lt_cv_path_LDCXX=/opt/arm-none-linux-gnueabi/bin/ld
| lt_cv_path_NM='/opt/bin/nm -B'
| lt_cv_path_mainfest_tool=no
| lt_cv_prog_compiler_c_o=yes
| lt_cv_prog_compiler_c_o_CXX=yes
| lt_cv_prog_compiler_c_o_RC=yes
| lt_cv_prog_compiler_pic='-fPIC -DPIC'
| lt_cv_prog_compiler_pic_CXX='-fPIC -DPIC'
| lt_cv_prog_compiler_pic_works=yes
| lt_cv_prog_compiler_pic_works_CXX=yes
| lt_cv_prog_compiler_rtti_exceptions=no
| lt_cv_prog_compiler_static_works=no
| lt_cv_prog_compiler_static_works_CXX=no
| lt_cv_prog_gnu_ld=yes
| lt_cv_prog_gnu_ldcxx=yes
| lt_cv_sharedlib_from_linklib_cmd='printf %s\n'
| lt_cv_shlibpath_overrides_runpath=no
| lt_cv_sys_argz_works=yes
| lt_cv_sys_dlopen_deplibs=yes
| lt_cv_sys_dlsearch_path='/lib /usr/lib'
| lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[
]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2
\2/p'\'' | sed '\''/ __gnu_lto/d'\'''
| lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \(.*\) .*$/
{"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/
{"\1", (void *) \&\1},/p'\'''
| lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^:
\(.*\) .*$/ {"\1", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]*
.* \(lib.*\)$/ {"\1", (void *) \&\1},/p'\'' -e
'\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/ {"lib\1", (void *)
\&\1},/p'\'''
| lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int
\1();/p'\'' -e '\''s/^[ABCDGIRSTW][ABCDGIRSTW]* .* \(.*\)$/extern char
\1;/p'\'''
| lt_cv_sys_global_symbol_to_import=
| lt_cv_sys_max_cmd_len=32768
| lt_cv_sys_symbol_underscore=no
| lt_cv_to_host_file_cmd=func_convert_file_noop
| lt_cv_to_tool_file_cmd=func_convert_file_noop
| lt_cv_truncate_bin='/opt/bin/dd bs=4096 count=1'
|
| ## ----------------- ##
| ## Output variables. ##
| ## ----------------- ##
|
| ACLOCAL='${SHELL} /root/build/libtool-2.4.6/build-aux/missing
aclocal-1.15'
| AMDEPBACKSLASH='\'
| AMDEP_FALSE='#'
| AMDEP_TRUE=''
| AMTAR='$${TAR-tar}'
| AM_BACKSLASH='\'
| AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
| AM_DEFAULT_VERBOSITY='0'
| AM_V='$(V)'
| AR='ar'
| ARFLAGS='cru'
| AS='as'
| AUTOCONF='${SHELL} /root/build/libtool-2.4.6/build-aux/missing autoconf'
| AUTOHEADER='${SHELL} /root/build/libtool-2.4.6/build-aux/missing
autoheader'
| AUTOM4TE='autom4te'
| AUTOMAKE='${SHELL} /root/build/libtool-2.4.6/build-aux/missing
automake-1.15'
| AUTOTEST='$(AUTOM4TE) --language=autotest'
| AWK='gawk'
| CC='gcc'
| CCDEPMODE='depmode=gcc3'
| CFLAGS='-g -O2'
| CONFIG_INCLUDE='config.h'
| CONFIG_STATUS_DEPENDENCIES='$(srcdir)/.version'
| CONVENIENCE_LTDL_FALSE=''
| CONVENIENCE_LTDL_TRUE='#'
| CPP='gcc -E'
| CPPFLAGS=''
| CXX='g++'
| CXXCPP='g++ -E'
| CXXDEPMODE='depmode=gcc3'
| CXXFLAGS='-g -O2'
| CYGPATH_W='echo'
| DEFS='-DHAVE_CONFIG_H'
| DEPDIR='.deps'
| DLLTOOL='false'
| DSYMUTIL=''
| DUMPBIN=''
| ECHO_C=''
| ECHO_N='-n'
| ECHO_T=''
| EGREP='/bin/grep -E'
| EXEEXT=''
| F77=''
| FC=''
| FCFLAGS=''
| FFLAGS=''
| FGREP='/bin/grep -F'
| GCJ=''
| GCJFLAGS='-g -O2'
| GL_COND_LIBTOOL_FALSE='#'
| GL_COND_LIBTOOL_TRUE=''
| GL_LIBOBJS=''
| GL_LTLIBOBJS=''
| GLtests_LIBOBJS=''
| GLtests_LTLIBOBJS=''
| GLtests_WITNESS='IN_LIBTOOL_GNULIB_TESTS'
| GOC=''
| GREP='/bin/grep'
| HELP2MAN='${SHELL} /root/build/libtool-2.4.6/build-aux/missing help2man'
| INSTALL_DATA='${INSTALL} -m 644'
| INSTALL_LTDL_FALSE='#'
| INSTALL_LTDL_TRUE=''
| INSTALL_PROGRAM='${INSTALL}'
| INSTALL_SCRIPT='${INSTALL}'
| INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
| LD='/opt/arm-none-linux-gnueabi/bin/ld'
| LDFLAGS=''
| LIBADD_DL='-ldl '
| LIBADD_DLD_LINK=''
| LIBADD_DLOPEN='-ldl'
| LIBADD_SHL_LOAD=''
| LIBOBJS=' ${LIBOBJDIR}lt__strl$U.o'
| LIBS=''
| LIBTOOL='$(SHELL) $(top_builddir)/libtool'
| LIPO=''
| LN_S='ln -s'
| LTDLOPEN='libltdl'
| LTLIBOBJS=' ${LIBOBJDIR}lt__strl$U.lo'
| LT_ARGZ_H=''
| LT_CONFIG_H='config.h'
| LT_DLLOADERS=' libltdl/dlopen.la'
| LT_DLPREOPEN='-dlpreopen libltdl/dlopen.la '
| LT_SYS_LIBRARY_PATH=''
| M4='/opt/bin/m4'
| M4_DEBUGFILE='--debugfile'
| M4_GNU='--gnu'
| MAKEINFO='${SHELL} /root/build/libtool-2.4.6/build-aux/missing makeinfo'
| MANIFEST_TOOL=':'
| MKDIR_P='/opt/bin/mkdir -p'
| NM='/opt/bin/nm -B'
| NMEDIT=''
| OBJDUMP='objdump'
| OBJEXT='o'
| OTOOL64=''
| OTOOL=''
| PACKAGE='libtool'
| PACKAGE_BUGREPORT='address@hidden'
| PACKAGE_NAME='GNU Libtool'
| PACKAGE_STRING='GNU Libtool 2.4.6'
| PACKAGE_TARNAME='libtool'
| PACKAGE_URL='http://www.gnu.org/software/libtool/'
| PACKAGE_VERSION='2.4.6'
| PATH_SEPARATOR=':'
| RANLIB='ranlib'
| RC=''
| SED='/bin/sed'
| SET_MAKE=''
| SHELL='/opt/bin/bash'
| STRIP='strip'
| VERSION='2.4.6'
| ac_ct_AR='ar'
| ac_ct_CC='gcc'
| ac_ct_CXX='g++'
| ac_ct_DUMPBIN=''
| ac_ct_F77=''
| ac_ct_FC=''
| aclocaldir='$(datadir)/aclocal'
| am__EXEEXT_FALSE=''
| am__EXEEXT_TRUE='#'
| am__fastdepCC_FALSE='#'
| am__fastdepCC_TRUE=''
| am__fastdepCXX_FALSE='#'
| am__fastdepCXX_TRUE=''
| am__include='include'
| am__isrc=''
| am__leading_dot='.'
| am__nodep='_no'
| am__quote=''
| am__tar='$${TAR-tar} chof - "$$tardir"'
| am__untar='$${TAR-tar} xf -'
| aux_dir='build-aux'
| bindir='${exec_prefix}/bin'
| build='armv5tejl-unknown-linux-gnueabi'
| build_alias=''
| build_cpu='armv5tejl'
| build_os='linux-gnueabi'
| build_vendor='unknown'
| datadir='${datarootdir}'
| datarootdir='${prefix}/share'
| docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
| dvidir='${docdir}'
| exec_prefix='${prefix}'
| host='armv5tejl-unknown-linux-gnueabi'
| host_alias=''
| host_cpu='armv5tejl'
| host_os='linux-gnueabi'
| host_vendor='unknown'
| htmldir='${docdir}'
| includedir='${prefix}/include'
| infodir='${datarootdir}/info'
| install_sh='${SHELL} /root/build/libtool-2.4.6/build-aux/install-sh'
| libdir='${exec_prefix}/lib'
| libexecdir='${exec_prefix}/libexec'
| localedir='${datarootdir}/locale'
| localstatedir='${prefix}/var'
| ltdl_dir='libltdl'
| macro_dir='m4'
| mandir='${datarootdir}/man'
| mkdir_p='$(MKDIR_P)'
| oldincludedir='/usr/include'
| package_revision='2.4.6'
| pdfdir='${docdir}'
| pkgaux_scripts='compile config.guess config.sub depcomp install-sh
missing'
| pkgdatadir='$(datadir)/libtool'
| prefix='/opt'
| program_transform_name='s,x,x,'
| psdir='${docdir}'
| sbindir='${exec_prefix}/sbin'
| sharedstatedir='${prefix}/com'
| sys_symbol_underscore='no'
| sysconfdir='${prefix}/etc'
| target_alias=''
| to_host_file_cmd='func_convert_file_noop'
| to_tool_file_cmd='func_convert_file_noop'
| with_aix_soname='aix'
|
| ## ----------- ##
| ## confdefs.h. ##
| ## ----------- ##
|
| /* confdefs.h */
| #define PACKAGE_NAME "GNU Libtool"
| #define PACKAGE_TARNAME "libtool"
| #define PACKAGE_VERSION "2.4.6"
| #define PACKAGE_STRING "GNU Libtool 2.4.6"
| #define PACKAGE_BUGREPORT "address@hidden"
| #define PACKAGE_URL "http://www.gnu.org/software/libtool/";
| #define PACKAGE "libtool"
| #define VERSION "2.4.6"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| #define LT_OBJDIR ".libs/"
| #define LT_MODULE_EXT ".so"
| #define LT_MODULE_PATH_VAR "LD_LIBRARY_PATH"
| #define LT_DLSEARCH_PATH "/lib:/usr/lib"
| #define HAVE_LIBDL 1
| #define HAVE_DLERROR 1
| #define HAVE_LIBDLLOADER 1
| #define HAVE_ARGZ_H 1
| #define HAVE_ERROR_T 1
| #define HAVE_ARGZ_ADD 1
| #define HAVE_ARGZ_APPEND 1
| #define HAVE_ARGZ_COUNT 1
| #define HAVE_ARGZ_CREATE_SEP 1
| #define HAVE_ARGZ_INSERT 1
| #define HAVE_ARGZ_NEXT 1
| #define HAVE_ARGZ_STRINGIFY 1
| #define HAVE_WORKING_ARGZ 1
| #define HAVE_PRELOADED_SYMBOLS 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DIRENT_H 1
| #define HAVE_CLOSEDIR 1
| #define HAVE_OPENDIR 1
| #define HAVE_READDIR 1
| #define LT_LIBEXT "a"
| #define LT_LIBPREFIX "lib"
|
| configure: exit 0
APPENDIX 2
=========
The Zyxel NASes are configured as follows:
~ # uname -a
Linux <machine name> 2.6.24.4 #1 Mon Aug 5 15:20:10 CST 2013 armv5tejl
GNU/Linux
~ # ls -al /lib/libc.so.6
lrwxrwxrwx 1 root root 11 Aug 5 2013 /lib/libc.so.6 -> libc-2.8.so
~ # ls -al /lib/libc-2.8.so
-rwxr-xr-x 1 root root 1189276 Aug 5 2013 /lib/libc-2.8.so
~ # /lib/libc.so.6
GNU C Library stable release version 2.8, by Roland McGrath et al.
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 4.3.2.
Compiled on a Linux >>2.6.32-28-generic-pae<< system on 2011-01-22.
Available extensions:
crypt add-on version 2.1 by Michael Glad and others
Native POSIX Threads Library by Ulrich Drepper et al
Support for some architectures added on, not maintained in
glibc core.
BIND-8.2.3-T5B
However, there is also ...
~ # ll /opt/lib/libc.so
-rwxr-xr-x 1 root root 209 Feb 14 2012 /opt/lib/libc.so
~ # /opt/lib/libc.so
/opt/lib/libc.so: line 1: /bin: Permission denied
/opt/lib/libc.so: line 2: Use: not found
/opt/lib/libc.so: line 3: the: not found
/opt/lib/libc.so: line 4: syntax error: unexpected word (expecting
")")
... which may be confusing things - it's certainly confusing me.
~ # which as
/opt/bin/as
~ # as --version
GNU assembler (GNU Binutils) 2.25.1
[...]
This assembler was configured for a target of
`armv5tejl-unknown-linux-gnueabi'.
~/build # which autoconf
/opt/bin/autoconf
~/build # autoconf --version
autoconf (GNU Autoconf) 2.69
~/build # which automake
/opt/bin/automake
~/build # automake --version
This Perl not built to support threads
Compilation failed in require at /opt/bin/automake line 137.
BEGIN failed--compilation aborted at /opt/bin/automake line 142.
# It's actually 1.12-1, according to ipkg
~/build # which awk
/bin/awk
~/build # awk --version
awk: unrecognized option '--version'
BusyBox v1.17.2 (2013-08-05 15:26:50 CST) multi-call binary.
Usage: awk [OPTIONS] [AWK_PROGRAM] [FILE]...
~/build # /opt/bin/awk --version
-sh: /opt/bin/awk: not found
~/build # which bison
~/build #
~ # which gcc
/opt/bin/gcc
~ # gcc --version
gcc (GCC) 4.2.3
~/build # which gettext
~/build #
~ # which ld
/opt/bin/ld
~ # ld --version
GNU ld (GNU Binutils) 2.25.1
~/build # which make
/opt/bin/make
~/build # make --version
GNU Make 3.82
Built for arm-none-linux-gnueabi
~/build # which perl
/opt/bin/perl
~/build # perl --version
This is perl, v5.10.0 built for arm-none-linux-gnueabi
~/build # which sed
/bin/sed
~/build # sed --version
This is not GNU sed version 4.0
~/build # /opt/bin/sed --version
-sh: /opt/bin/sed: not found
~/build # which texinfo
~/build #
~/build/libtool-2.4.6 # set
ENV='<snip>'
HD0='<snip>'
HD1='<snip>'
HISTCONTROL='erasedups:ignoredups'
HISTFILE='/root/.ash_history'
HISTFILESIZE='250'
HISTSIZE='250'
HOME='<snip>'
IFS='
'
LD_LIBRARY_PATH='/opt/share/lib:/opt/lib:/usr/lib:/usr/local/lib:/var/lib:/l
ib:/usr/local/zy-pkgs/lib:/opt/arm-none-linux-gnueabi/lib'
LOGNAME='root'
MAIL='<snip>'
OLDPWD='<snip>'
PATH='/opt/share/bin:/opt/share/sbin:/opt/bin:/opt/sbin:/usr/local/bin:/usr/
local/sbin:/usr/bin:/usr/sbin:/usr/local/zy-pkgs/bin:/bin:/sbin:/zyxel/sbin'
PPID='25022'
PS1='\w \$ '
PS2='> '
PS4='+ '
PWD='<snip>'
RSYNC_OPTS='<snip>'
SHELL='/bin/sh'
SSH_CLIENT='<snip>'
SSH_CONNECTION='<snip>'
SSH_TTY='/dev/pts/0'
TERM='vt102'
TMPDIR='/<snip>/.tmp'
USER='root'
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- Building on an ARM-based NAS fails 'Standalone' test section,
MacFH - C E Macfarlane <=