[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Still no beams with GS6.5 & GsV3.6
From: |
lars prins |
Subject: |
Still no beams with GS6.5 & GsV3.6 |
Date: |
Sun, 25 Nov 2001 14:58:03 |
Hi Lilypond/Han-Wen,
Here is the promised more complete error report.
In short: I still can't get beams.
This is supposedly a known problem and I tried to solve it as
suggested on the web-site but without success.
Below, you will find
Detailed steps
lilypond verbose output
input file
full config info
How can I see which Ghost-anything is used by yap?
How do I get my beams?
Is the message
note: there is no fndb for C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..
relevant?
Thanks, Lars
------------------------ detailed steps ---------------------
$ ly2dvi stoom.ly
$ yap stoom.dvi
YAP logbook:
Loading page 1...
Sending
C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..\dvips\base\tex.pro...
Error: PostScript problem:
GhostScript 6.0 or better is required
The resulting image did not contain any beams.
When printing from yap to my deskjet, I don't get beams on
the print out either.
I Installed GS View-3.6 and GhostScript-6.50 since I didn't want
to draw all beams by hand, as was recommended on the Lilypond
web-site on the windows installation pages.
Now the YAP error has gone, but yap still does not show any beams.
Also, I do not get any annoying Register Now/Cancel messages.
Should I not have got such messages if yap uses the newer GS stuff?
-------------------- Lilypond verbose output: --------------------
address@hidden ~/scores/sinterkl$ ly2dvi --verbose stoom.ly
Invoking `lilypond -I /home/prins/scores/sinterkl -H dedication -H title -H
subtitle -H subsubtitle -H footer -H head -H composer -H arranger -H
instrument -H opus -H piece -H metre -H meter -H poet -H texttranslator -H
language -H linewidth -H latexpackages -H latexoptions -H latexheaders -H
orientation -H pagenumber -H textheight -H papersize --verbose
/home/prins/scores/sinterkl/stoom '
GNU LilyPond 1.4.8
[/usr/lilypond-1.4.8/share/lilypond/scm/lily.scm][/usr/lilypond-1.4.8/share/lilypond/scm/output-lib.scm][/usr/lilypond-1.4.8/share/lilypond/scm/tex.scm][/usr/lilypond-1.4.8/share/lilypond/scm/ps.scm][/usr/lilypond-1.4.8/share/lilypond/scm/pdf.scm][/usr/lilypond-1.4.8/share/lilypond/scm/pdftex.scm][/usr/lilypond-1.4.8/share/lilypond/scm/ascii-script.scm][/usr/lilypond-1.4.8/share/lilypond/scm/c++.scm][/usr/lilypond-1.4.8/share/lilypond/scm/grob-property-description.scm][/usr/lilypond-1.4.8/share/lilypond/scm/translator-property-description.scm][/usr/lilypond-1.4.8/share/lilypond/scm/interface-description.scm][/usr/lilypond-1.4.8/share/lilypond/scm/beam.scm][/usr/lilypond-1.4.8/share/lilypond/scm/clef.scm][/usr/lilypond-1.4.8/share/lilypond/scm/slur.scm][/usr/lilypond-1.4.8/share/lilypond/scm/font.scm][/usr/lilypond-1.4.8/share/lilypond/scm/music-functions.scm][/usr/lilypond-1.4.8/share/li
lypond/scm/music-property-description.scm][/usr/lilypond-1.4.8/share/lilypond/scm/auto-beam.scm][/usr/lilypond-1.4.8/share/lilypond/scm/generic-property.scm][/usr/lilypond-1.4.8/share/lilypond/scm/basic-properties.scm][/usr/lilypond-1.4.8/share/lilypond/scm/chord-name.scm][/usr/lilypond-1.4.8/share/lilypond/scm/grob-description.scm][/usr/lilypond-1.4.8/share/lilypond/scm/script.scm][/usr/lilypond-1.4.8/share/lilypond/scm/drums.scm][/usr/lilypond-1.4.8/share/lilypond/scm/midi.scm]
Now processing: `/home/prins/scores/sinterkl/stoom.ly'
Parsing...[/usr/lilypond-1.4.8/share/lilypond/ly/init.ly[/usr/lilypond-1.4.8/share/lilypond/ly/declarations.ly[/usr/lilypond-1.4.8/share/lilypond/ly/nederlands.ly][/usr/lilypond-1.4.8/share/lilypond/ly/chord-modifiers.ly][/usr/lilypond-1.4.8/share/lilypond/ly/script.ly][/usr/lilypond-1.4.8/share/lilypond/ly/scale-definitions.ly][/usr/lilypond-1.4.8/share/lilypond/ly/engraver.ly][/usr/lilypond-1.4.8/share/lilypond/ly/midi.ly[/usr/lilypond-1.4.8/share/lilypond/ly/performer.ly]][/usr/lilypond-1.4.8/share/lilypond/ly/generic-paper.ly][/usr/lilypond-1.4.8/share/lilypond/ly/paper20.ly[/usr/lilypond-1.4.8/share/lilypond/ly/params.ly[/usr/lilypond-1.4.8/share/lilypond/ly/a4.ly][/usr/lilypond-1.4.8/share/lilypond/ly/paper.ly]]][/usr/lilypond-1.4.8/share/lilypond/ly/dynamic-scripts.ly][/usr/lilypond-1.4.8/share/lilypond/ly/spanners.ly][/usr/lilypond-1.4.8/share/lilypond/ly/property.ly]][/home/prin
s/scores/sinterkl/stoom.ly]]
Interpreting music...[8][16][18]elapsed time: 0.43 seconds
Element count 837 Preprocessing elements... Element count 1415
[/usr/lilypond-1.4.8/share/lilypond/afm/feta20.afm][/usr/lilypond-1.4.8/share/lilypond/tfm/feta20.tfm]
Calculating column positions...
[/usr/lilypond-1.4.8/share/lilypond/tfm/feta-nummer10.tfm][3][6][9][12][15]
paper output to `stoom.tex'...
[/usr/lilypond-1.4.8/share/lilypond/ps/music-drawing-routines.ps]Element
count
874.[[/usr/lilypond-1.4.8/share/lilypond/tfm/feta-braces0.tfm][/usr/lilypond-1.4.8/share/lilypond/tfm/feta-braces1.tfm][/usr/lilypond-1.4.8/share/lilypond/tfm/feta-braces2.tfm][/usr/lilypond-1.4.8/share/lilypond/tfm/feta-braces3.tfm][/usr/lilypond-1.4.8/share/lilypond/tfm/feta-braces4.tfm]0][[/usr/share/texmf/fonts/tfm/public/cm/cmr8.tfm]1]
Interpreting music...elapsed time: 0.04 seconds
MIDI output to `stoom.midi'...
Track ... [0][1]
((gc-time-taken . 827) (cells-allocated . 111003) (cell-heap-size . 328232)
(bytes-malloced . 529794) (gc-malloc-threshold . 543309) (cell-heap-segments
(12301616 . 11933432) (12349680 . 12301632) (12878488 . 12622360) (13325568
. 13005408) (14198840 . 13606544) (15266144 . 14225104)))
Analyzing stoom.tex...
Invoking `latex \\nonstopmode \\input stoom.latex'
This is TeX, Version 3.14159 (MiKTeX 2)
LaTeX2e <2000/06/01>
Babel <v3.6Z> and hyphenation patterns for english, french, german, ngerman,
du
mylang, nohyphenation, loaded.
(stoom.latex
(C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..\tex\latex\base\article.cls
Document Class: article 2000/05/19 v1.4b Standard LaTeX document class
(C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..\tex\latex\base\size10.clo))
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\geometry.sty
(C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..\tex\latex\graphics\keyval.sty))
(C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..\tex\latex\base\inputenc.sty
(C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..\tex\latex\base\latin1.def))
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\titledefs.tex)
No file stoom.aux.
(stoom.tex (C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\lilyponddefs.tex
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\feta20.tex)
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\lilypond-latex.tex
LaTeX definitions)
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\lily-ps-defs.tex)
[footer empty]))
Overfull \vbox (0.7539pt too high) has occurred while \output is active
[1] (stoom.aux) )
(see the transcript file for additional information)
Output written on stoom.dvi (1 page, 12564 bytes).
Transcript written on stoom.log.
note: there is no fndb for C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..
MIDI output to `stoom.midi'...
DVI output to `stoom.dvi'...
Cleaning /cygdrive/c/WINDOWS/TEMP/@356725.0ly2dvi...
------------------------ Input file: -------------------
% Zie ginds komt de stoomboot
%
\score {
\context PianoStaff \notes
<
\context Staff = high {
\time 3/4
\key g \major
\clef violin
\relative c' <
\context Voice=VA {\stemUp s2 d4 g g b a a c fis, fis a g2 d4}
\context Voice=VB {\stemDown s2. b2 d4 e2. d2 c4 b2 s4}>
\relative c' <
\context Voice=VA {\stemUp g'4 g b a a c fis, fis a g2 d'4}
\context Voice=VB {\stemDown b,2 d4 e2. d2 c4 b2 s4}>
\relative c' {
<fis4 a> <fis a> d' <g, b> <g b> d' <a c> <a c> <g b> <fis2 a> d4}
\relative c' <
\context Voice=VA {\stemUp <b4 g'> [g'8 a b c] d4 b g c a <c, fis> <b2 g'>
\bar "|."}
\context Voice=VB {\stemDown s2. g'2. e2 c4 s2}>
}
\context Staff = low {
\key g \major
\clef bass
\relative c' {
s2. g2 b,4 c2 a4 d2 fis4 g g, r}
\relative c' {
g2 b,4 c2 a4 d2 fis4 g g, r}
\relative c' {
[d8 a] d,2 [d'8 b] d,2 [d'8 a] d,4 [g8 b] d4 d, c b g' d <b2 g'> e4 <c2 a'>
<d4 a'> <g2 g,>}
}
\paper {indent = 0.0 \cm}
\midi {}
}
------------------- Full configuration info: -------------------
Windows 98.
address@hidden ~$ echo $SHELL
/bin/bash
address@hidden ~$ echo $HOME
/home/prins
address@hidden ~$ cd
address@hidden ~$ pwd
/home/prins
address@hidden ~$ ls -l
total 41
-rw-r--r-- 1 prins unknown 5052 Nov 18 10:56 example-1.dvi
-rw-r--r-- 1 prins unknown 353 Nov 3 13:41 example-1.latex
-rw-r--r-- 1 prins unknown 1091 Nov 3 13:47 example-1.log
-rw-r--r-- 1 prins unknown 220 Nov 3 13:35 example-1.ly
-rw-r--r-- 1 prins unknown 390 Nov 18 10:56 example-1.midi
-rw-r--r-- 1 prins unknown 18364 Nov 3 13:51 example-1.ps
-rw-r--r-- 1 prins unknown 12693 Nov 3 13:41 example-1.tex
drwxr-xr-x 3 prins unknown 0 Nov 11 20:24 scores
address@hidden ~$ type -p lilypond
/usr/lilypond-1.4.8/bin/lilypond
address@hidden ~$ lilypond --version
GNU LilyPond 1.4.8
This is free software. It is covered by the GNU General Public License,
and you are welcome to change it and/or distribute copies of it under
certain conditions. Invoke as `lilypond --warranty' for more information.
Copyright (c) 1996--2001 by
Han-Wen Nienhuys <address@hidden>
Jan Nieuwenhuizen <address@hidden>
address@hidden ~$ type -p python
/usr/bin/python
address@hidden ~$ type -p ly2dvi
/usr/lilypond-1.4.8/wrappers/ly2dvi
address@hidden ~$ ly2dvi --version
ly2dvi (GNU LilyPond) 1.4.8
address@hidden ~$ type -p latex
/usr/lilypond-1.4.8/wrappers/latex
address@hidden ~$ type -p latex.exe
/usr/windows/MiKTeX/miktex/bin/latex.exe
address@hidden ~$ echo $MFINPUTS
/usr/lilypond-1.4.8/share/lilypond/mf::
address@hidden ~$ echo $TFMFONTS
/usr/lilypond-1.4.8/share/lilypond/tfm::
address@hidden ~$ echo $WINDOWS_MFINPUTS
C:\cygwin\usr\lilypond-1.4.8\share\lilypond\mf;.;.
address@hidden ~$ echo $WINDOWS_TFMFONTS
C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tfm;.;.
address@hidden ~$lilypond example-1.ly
GNU LilyPond 1.4.8
Now processing: `example-1.ly'
Parsing...
Interpreting music...[3]
Preprocessing elements...
Calculating column positions...
paper output to `example-1.tex'...
Interpreting music...
MIDI output to `example-1.midi'...
Track ...
address@hidden ~$ tex example-1.tex
This is TeX, Version 3.14159 (MiKTeX 2)
note: there is no fndb for C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..
(example-1.tex
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\lilyponddefs.tex
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\feta20.tex)
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\lilypond-plaintex.tex
LilyPond Plain TeX settings)
(C:\cygwin\usr\lilypond-1.4.8\share\lilypond\tex\lily-ps-defs.tex)
[footer empty]) [1] )
Output written on example-1.dvi (1 page, 4900 bytes).
Transcript written on example-1.log.
address@hidden ~$ dvips -o example-1.ps example-1.dvi
note: there is no fndb for C:\CYGWIN\USR\WINDOWS\MIKTEX\MIKTEX\BIN\..\..
This is dvips(k) 5.86 Copyright 1999 Radical Eye Software
(www.radicaleye.com)
' TeX output 2001.11.25:1358' -> example-1.ps
C:\cygwin\usr\windows\MiKTeX\miktex\bin\dvips.exe: Checksum mismatch in font
fet
a20
<texc.pro><special.pro>. [1]
address@hidden ~$ ls -l
total 38
-rw-r--r-- 1 prins unknown 4900 Nov 25 13:58 example-1.dvi
-rw-r--r-- 1 prins unknown 353 Nov 3 13:41 example-1.latex
-rw-r--r-- 1 prins unknown 530 Nov 25 13:58 example-1.log
-rw-r--r-- 1 prins unknown 220 Nov 3 13:35 example-1.ly
-rw-r--r-- 1 prins unknown 378 Nov 25 13:58 example-1.midi
-rw-r--r-- 1 prins unknown 15571 Nov 25 14:00 example-1.ps
-rw-r--r-- 1 prins unknown 12693 Nov 25 13:58 example-1.tex
drwxr-xr-x 3 prins unknown 0 Nov 11 20:24 scores
address@hidden ~$ ls -l
/usr/windows/MiKTeX/spool/texmf/fonts/pk/ljfour/public/lilypond/
ls: /usr/windows/MiKTeX/spool/texmf/fonts/pk/ljfour/public/lilypond/: No
such file or directory
<br><br><br>----
address@hidden
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
- Still no beams with GS6.5 & GsV3.6,
lars prins <=