Re: Getting readline to work in scheme-sandbox

[Knute Snortum]

I didn't get past autogen:

autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force -I m4
configure.ac:905: warning: macro 'AM_GNU_GETTEXT' not found in library
autoreconf: configure.ac: tracing
autoreconf: configure.ac: adding subdirectory guile-readline to autoreconf
autoreconf: Entering directory `guile-readline'
autoreconf: running: aclocal --force
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, '.'.
libtoolize: copying file './ltmain.sh'
libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
libtoolize: and rerunning libtoolize and aclocal.
libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
autoreconf: running: /usr/bin/autoconf --force
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --copy --force-missing
configure.ac:18: installing './compile'
configure.ac:19: installing './config.guess'
configure.ac:19: installing './config.sub'
configure.ac:13: installing './install-sh'
configure.ac:13: installing './missing'
Makefile.am:29: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS'
(or '*_CPPFLAGS')
Makefile.am: installing './depcomp'
autoreconf: Leaving directory `guile-readline'
libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
libtoolize: copying file 'build-aux/ltmain.sh'
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
libtoolize: copying file 'm4/libtool.m4'
libtoolize: copying file 'm4/ltoptions.m4'
libtoolize: copying file 'm4/ltsugar.m4'
libtoolize: copying file 'm4/ltversion.m4'
libtoolize: copying file 'm4/lt~obsolete.m4'
configure.ac:905: warning: macro 'AM_GNU_GETTEXT' not found in library
configure.ac:932: error: possibly undefined macro: AM_GNU_GETTEXT
      If this token and others are legitimate, please use m4_pattern_allow.
      See the Autoconf documentation.
autoreconf: /usr/bin/autoconf failed with exit status: 1


---
Knute Snortum
(via Gmail)

On Wed, Jan 15, 2020 at 12:24 AM Michael Käppler <address@hidden> wrote:
>
> Ok, seems that guile-2.2-libs does not provide libguilereadline...
>
> I think the remaining option is to build guile-1.8 from scratch.
> First make sure that you have libreadline-dev installed, then, in your
> home directory, do:
>
> git clone -b branch_release-1-8 --single-branch
> https://git.savannah.gnu.org/git/guile.git guile-1.8
> cd guile-1.8
> ./autogen.sh
> ./configure --disable-error-on-warning --prefix=/usr/local
> make
> make install
> ldconfig
>
> If you do not want to install your self-compiled guile-1.8 globally with
> "make install" it should be also sufficient to
> rename
> /home/knute/lilypond/lilypond-2.19.83/lilypond/usr/lib/libguilereadline-v-17.so.17.0.3
> to
> libguilereadline-v-17.so.17.0.3.old and put the corresponding file from
> /home/knute/guile-1.8/guile-readline/.libs/
> in there.
>
> Then try with scheme-sandbox.ly again. Please report if it succeeds now.
>
> Michael
>
>
>
>
> Am 15.01.2020 um 00:05 schrieb Knute Snortum:
> > I'm not in a vanilla setup, so I changed the commands to: (just for 
> > posterity)
> >
> > $ export 
> > LD_LIBRARY_PATH="/home/knute/lilypond/lilypond-2.19.83/lilypond/usr/lib"
> > $ strace -o readlinedebug.log
> > /home/knute/lilypond/lilypond-2.19.83/lilypond/usr/bin/lilypond
> > scheme-sandbox.ly
> >
> > The log file is attached.
> >
> > ---
> > Knute Snortum
> > (via Gmail)
> >
> > On Tue, Jan 14, 2020 at 8:47 AM Michael Käppler <address@hidden> wrote:
> >> This is weird. Seems that strace does not recognize the shebang in the
> >> lilypond script.
> >> Could you please to try to execute the steps in the startup script 
> >> directly?
> >> I assume you used the vanilla lilypond installer and installed to your
> >> home directory
> >> /home/knute/:
> >>
> >> export LD_LIBRARY_PATH="/home/knute/lilypond/usr/lib"
> >> strace -o readlinedebug.log /home/knute/lilypond/usr/bin/lilypond
> >> scheme-sandbox.ly
> >>
> >>
> >>
> >> Am 14.01.2020 um 16:36 schrieb Knute Snortum:
> >>> It looks like I get an error in strace.  The sandbox is never executed:
> >>>
> >>> execve("/home/knute/bin/lilypond", ["lilypond", "scheme-sandbox.ly"],
> >>> 0x7ffe4792c428 /* 53 vars */) = -1 ENOEXEC (Exec format error)
> >>> strace: exec: Exec format error
> >>> +++ exited with 1 +++
> >>>
> >>> ---
> >>> Knute Snortum
> >>> (via Gmail)
> >>>
> >>> On Mon, Jan 13, 2020 at 10:59 PM Michael Käppler <address@hidden> wrote:
> >>>> Hi Knute,
> >>>> I'm currently working on this problem. A library called
> >>>> libguilereadline, that comes with guile,
> >>>> does provide the interface to the libreadline library. The version we
> >>>> ship with our packages, however,
> >>>> seems to be broken somehow.
> >>>> There are some ways to get around this. Do you have
> >>>> guile-2.2-libs installed, too?
> >>>> If installing guile-2.2-libs does not help either, please send me the 
> >>>> output
> >>>> of
> >>>>
> >>>> strace -o readlinedebug.log lilypond scheme-sandbox.ly
> >>>>
> >>>> where you type the mentioned commands for activating readline.
> >>>>
> >>>> Regards,
> >>>> Michael
> >>>>
> >>>> Am 14.01.2020 um 01:31 schrieb Knute Snortum:
> >>>>> I recently discovered the scheme-sandbox in LilyPond and I want to get
> >>>>> line editing to work.  In scheme-sandbox.ly the comments say:
> >>>>>
> >>>>> % One typical thing you might want to put there is
> >>>>> % (use-modules (ice-9 readline))
> >>>>> % (activate-readline)
> >>>>> % in order to activate command line editing for interactive sessions.
> >>>>>
> >>>>> I'm assuming that these are commands to type into the sandbox.  But
> >>>>> when I do this I get an error:
> >>>>>
> >>>>> guile> (use-modules (ice-9 readline))
> >>>>> ERROR: readline is not provided in this Guile installation
> >>>>> ABORT: (misc-error)
> >>>>>
> >>>>> When I search for installed packages at the Linux command line, I see 
> >>>>> this:
> >>>>>
> >>>>> libreadline8/eoan,now 8.0-3 amd64 [installed,automatic]
> >>>>>
> >>>>> Any idea why readline is not available?
> >>>>>
> >>>>> My system is Ubuntu 19.10, Guile is 2.2 and LilyPond is 2.19.83.
> >>>>>
> >>>>> ---
> >>>>> Knute Snortum
> >>>>> (via Gmail)
> >>>>>
>