Re: [Ltib] a's in integer output

[Tobias Simon]

Hello Stuart,

Here's what I see:

Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/root                28416      7656     1a75a  27% /
rwfs                       512        32       47a   6% /mnt/rwfs
rwfs                       512        32       47a   6% /tmp
rwfs                       512        32       47a   6% /var
shm                      63a64         0     63a64   0% /dev/shm

There are a lot of 'a's, but only in the column "Available".
Setting the Locale has no effect.

I am using Minicom, too. It also appears using SSH with dropbear.

Regards,
Tobi

Am Montag, 22. Januar 2007 16:13 schrieben Sie:
> Hi Tobi,
>
> I've not seen that.  What terminal emulator are you using?  I use
> minicom.
>
> Also it sounds as though it may be related to your locale (possibly).
> Can you try for test purposes to do (on your host before starting
> minicom):
>
> $ export LANG=en_GB
>
> and see if this makes any difference.
>
> Regards, Stuart
>
> On Mon, 2007-01-22 at 15:54 +0100, Tobias Simon wrote:
> > Hello List,
> >
> > did anybody encounter the following problem?:
> > In some outputs ("cat /proc/cpuinfo", "df", ...) I see some "a"
> > characters written over normal digits when printing an integer value.
> > Things like "1a47" appear on the screen.
> >
> > I use a MCF5475 and the 2.6.10-Kernel with Freescale patches. The Problem
> > appears on both, serial console and SSH so the Serial Driver seems to be
> > OK.
> >
> > It may be a Problem with Busybox. My own Programs print the Integers
> > correct - it's very weird!
> >
> >
> > Regards,
> > Tobi

-- 
Tobias Simon
senTec Elektronik GmbH
address@hidden