Re: [Ltib] Building xorg-server; missing dependencies?

[Hamilton Vera]

Hi Stuart, where can I find the "startx" program?

I am testing the same packages for iMX27.

Do I need to build the " build full Xorg (experimental only)" to make it work?

Till now, no problem with the evas package.

Thanks in advance.

On Thu, Feb 26, 2009 at 2:48 PM, Stuart Hughes <address@hidden> wrote:
> Hi Alex,
>
> You need to install some host components first, see:
>
> http://www.libertatia.org/blog/?p=66
>
> Basically:
>
>    $ ./ltib –hostcf -p eet.spec
>        $ ./ltib –hostcf -p embryo.spec
>        $ ./ltib –hostcf -p evas.spec
>        $ ./ltib –hostcf -p ecore.spec
>        $ ./ltib –hostcf -p edje.spec
>
> The startup instructions are out of date, all you need to do is 'startx'
> last time I tried.
>
> Regards, Stuart
>
> On Thu, 2009-02-26 at 12:31 -0500, Alexandre Paradis wrote:
>> Hi Stuart,
>>
>> The libjpeg built successfully, thanks.
>>
>> I'm at currently at building enlightenment, and the "emotion" package failed 
>> to build:
>>
>> [snip...]
>> Making all in data
>> make[2]: Entering directory 
>> `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
>> edje_cc -v -id ../data -fd ../data \
>>         ../data/theme.edc \
>>         ../data/theme.edj
>> make[2]: edje_cc: Command not found
>> make[2]: *** [theme.edj] Error 127
>> make[2]: Leaving directory 
>> `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory 
>> `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042'
>> make: *** [all] Error 2
>> error: Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.88468 
>> (%build)
>>
>>
>> RPM build errors:
>>     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.88468 (%build)
>> Build time for emotion: 14 seconds
>>
>> Failed building emotion
>>
>>
>> f_buildrpms() returned an error, exiting
>> traceback:
>>  main:552
>>
>>
>> Started: Thu Feb 26 12:19:41 2009
>> Ended:   Thu Feb 26 13:27:17 2009
>> Elapsed: 4056 seconds
>>
>> These packages failed to build:
>> emotion
>>
>> Build Failed
>>
>> Exiting on error or interrupt
>>
>>
>>
>> The edje package built successfully, and I do have "edje_cc" in my root fs:
>> address@hidden ~/savannah/ltib $ locate edje_cc
>> /home/alex/savannah/ltib/rootfs/usr/bin/edje_cc
>>
>> Any ideas?
>>
>> Thanks!
>> --
>> Alex
>>
>> -----Original Message-----
>> From: Stuart Hughes [mailto:address@hidden
>> Sent: February 26, 2009 10:40 AM
>> To: Alexandre Paradis
>> Cc: address@hidden
>> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>>
>> Hi Alex,
>>
>> Glad it was something straightforward.  I'd be inclined to not trust
>> anything you built so far and do (save any work first!)
>>
>> $ rm -rf rpm/BUILD/*
>> $ ./ltib -f
>>
>> This will force rebuild everything.
>>
>> Regards, Stuart
>>
>> On Thu, 2009-02-26 at 10:12 -0500, Alexandre Paradis wrote:
>> > Hi Stuart
>> >
>> > You're right, I had a misconfiguration on my system.
>> >
>> > When I did the commands in the ltib shell, it displayed the powerpc gcc, 
>> > not my native one.
>> >
>> > The problem was that for some reason I can't remember, I had made dynamic 
>> > links to various powerpc-e300c3-linux-gnu-* files, one of them with the 
>> > name "gcc".
>> >
>> > Stupid mistake of mine, I removed them and now your test shows the correct 
>> > gcc version (my native one).
>> >
>> > Thanks a LOT for your help.  I'll try building again.
>> >
>> > --
>> > Alex
>> >
>> >
>> > -----Original Message-----
>> > From: Stuart Hughes [mailto:address@hidden
>> > Sent: February 26, 2009 8:43 AM
>> > To: Alexandre Paradis
>> > Cc: address@hidden
>> > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> >
>> > Hi Alex,
>> >
>> > I just tried the same thing (copy config/platform/mpc5121ads -> Savannah
>> > CVS copy).  I then ran ltib to configure and build this.  It builds
>> > libjpeg without any problem.
>> >
>> > Processing platform: Freescale MPC512x based boards
>> > =====================================================
>> > using config/platform/mpc5121ads/.config
>> > [snip]
>> > Executing(%build): /bin/sh
>> > -e /home/seh/ltib_bsps/savannah_ltib/tmp/rpm-tmp.60945
>> > + umask 022
>> > + cd /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD
>> > + cd jpeg-6b
>> > + export
>> > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin
>> > +
>> > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin
>> > + ./configure --enable-static --enable-shared --target=powerpc-linux
>> > --prefix=/usr
>> > checking for gcc... gcc
>> > checking whether the C compiler (gcc  ) works... yes
>> > checking whether the C compiler (gcc  ) is a cross-compiler... no
>> > checking whether we are using GNU C... yes
>> > checking how to run the C preprocessor... gcc -E
>> > checking for function prototypes... yes
>> > checking for stddef.h... yes
>> > ...
>> >
>> > The key difference between this and your output is:
>> >
>> > checking whether the C compiler (gcc  ) is a cross-compiler... no
>> >
>> > You're says:
>> > >> checking whether the C compiler (gcc  ) is a cross-compiler... yes
>> >
>> > It looks like you have some miss configuration as it should be finding
>> > the build machines native C compiler.
>> >
>> > Let me explain a bit.   If you look at the spec file you'll see:
>> >
>> > %Build
>> > export PATH=$UNSPOOF_PATH
>> > ./configure --enable-static --enable-shared --target=$CFGHOST --prefix=
>> > %{_prefix}
>> > export PATH=$SPOOF_PATH
>> > make
>> >
>> > This is a bit unusual inasmuch that configure is done without spoofing
>> > (e.g. gcc is not an alias for the cross compiler, or should not be).
>> > >From my notes this is because:
>> >
>> > Get libjpeg to cross compile by using UNSPOOF_PATH for ./configure and
>> > SPOOF_PATH for make.  All this is necessary because ./configure calls
>> > ltconfig which inturn calls config.guess which trys to compile and run a
>> > test .c program using the first gcc in its path.
>> >
>> > To get to the bottom of this, can you run the following:
>> >
>> > $ ./ltib -m shell
>> > LTIB> export PATH=$UNSPOOF_PATH
>> > LTIB> which gcc
>> > ...
>> > LTIB> gcc -v
>> > ...
>> > LTIB> exit
>> > $
>> >
>> > The output will show which compiler gcc is.  It should be the native one
>> > on your build machine.  For example mine shows:
>> >
>> > LTIB> which gcc
>> > /usr/bin/gcc
>> >
>> > LTIB> gcc -v
>> > Using built-in specs.
>> > Target: i386-redhat-linux
>> > Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
>> > --infodir=/usr/share/info --enable-shared --enable-threads=posix
>> > --enable-checking=release --with-system-zlib --enable-__cxa_atexit
>> > --disable-libunwind-exceptions --enable-libgcj-multifile
>> > --enable-languages=c,c++,objc,java,f95,ada --enable-java-awt=gtk
>> > --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre
>> > --host=i386-redhat-linux
>> > Thread model: posix
>> > gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)
>> >
>> > Regards, Stuart
>> >
>> > On Wed, 2009-02-25 at 11:23 -0500, Alexandre Paradis wrote:
>> > > Hi Stuart,
>> > >
>> > > Here is the LTIB output using Savannah CVS, and my config file.
>> > >
>> > > Thanks,
>> > >
>> > > --
>> > > Alex
>> > >
>> > > -----Original Message-----
>> > > From: Stuart Hughes [mailto:address@hidden
>> > > Sent: February 25, 2009 9:50 AM
>> > > To: Alexandre Paradis
>> > > Cc: address@hidden
>> > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> > >
>> > > Hi Alex,
>> > >
>> > > You're on the wrong track here I think.  You should not need to do this.
>> > >
>> > > Anything under rpm/BUILD is not under CVS and so is generated.  If this
>> > > build is failing, removed rpm/BUILD/_failed_package_ and then re-try.
>> > >
>> > > If that doesn't work please post the LTIB output.  I need to know the
>> > > command you ran, which LTIB (Savannah?) and also which configuration
>> > > you're using (cat .config and then send me
>> > > config/platform/_target_/.config)
>> > >
>> > > Regards, Stuart
>> > >
>> > > On Wed, 2009-02-25 at 09:27 -0500, Alexandre Paradis wrote:
>> > > > OK, I fixed it by replacing the config.sub and config.guess from 
>> > > > http://cvs.savannah.gnu.org/viewvc/~checkout~/config/config/
>> > > >
>> > > > I replaced them in the /home/alex/savannah/ltib/rpm/BUILD/jpeg-6b then 
>> > > > re-ran ./ltib
>> > > >
>> > > > Is this something that would need to be added to the GPP package?
>> > > >
>> > > > --
>> > > > Alex
>> > > >
>> > > > -----Original Message-----
>> > > > From: address@hidden [mailto:address@hidden On Behalf Of Alexandre 
>> > > > Paradis
>> > > > Sent: February 25, 2009 9:01 AM
>> > > > To: Stuart Hughes
>> > > > Cc: address@hidden
>> > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> > > >
>> > > > Hi Stuart,
>> > > >
>> > > > libjpeg failed to build:
>> > > >
>> > > > /// OUTPUT ///
>> > > > checking host system type... ./config.guess: line 618: ./dummy: cannot 
>> > > > execute binary file
>> > > > ./config.guess: line 848: ./dummy: cannot execute binary file
>> > > > ltconfig: cannot guess host type; you must specify one Try `ltconfig 
>> > > > --help' for more information.
>> > > > checking libjpeg version number... 62
>> > > > creating ./config.status
>> > > > creating Makefile
>> > > > creating jconfig.h
>> > > > + export
>> > > > + 
>> > > > PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
>> > > > + 
>> > > > nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
>> > > > + 
>> > > > ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
>> > > > + :/usr/bin/X11:/usr/X11R6/bin
>> > > > + 
>> > > > PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
>> > > > + 
>> > > > nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
>> > > > + 
>> > > > ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
>> > > > + :/usr/bin/X11:/usr/X11R6/bin
>> > > > + make
>> > > > ./libtool --mode=compile gcc -O2  -I. -c ./jcapimin.c
>> > > > make: ./libtool: Command not found
>> > > > make: *** [jcapimin.lo] Error 127
>> > > > error: Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.15054 
>> > > > (%build)
>> > > >
>> > > >
>> > > > RPM build errors:
>> > > >     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.15054 
>> > > > (%build) Build time for libjpeg: 2 seconds /// END OUTPUT ///
>> > > >
>> > > >
>> > > > I do have libtool installed on my system, but it seems it's trying to 
>> > > > run it from the local folder? (./libtool)
>> > > >
>> > > >
>> > > > --
>> > > > Alex
>> > > >
>> > > > -----Original Message-----
>> > > > From: Stuart Hughes [mailto:address@hidden
>> > > > Sent: February 25, 2009 4:00 AM
>> > > > To: Alexandre Paradis
>> > > > Cc: address@hidden
>> > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> > > >
>> > > > Hi Alex,
>> > > >
>> > > > cross-gdb/gdbserver should also build.  If you want those later we can 
>> > > > try to debug what is wrong.
>> > > >
>> > > > Regards, Stuart
>> > > >
>> > > > On Tue, 2009-02-24 at 16:44 -0500, Alexandre Paradis wrote:
>> > > > > I think I just selected the wrong gdb package in the list.
>> > > > >
>> > > > > I'm rebuilding with the native gdb package instead (without cross-gdb
>> > > > > and gdbserver), and it didn't stop this time, so you can ignore my
>> > > > > last question ;)
>> > > > >
>> > > > > --
>> > > > > Alex
>> > > > >
>> > > > > -----Original Message-----
>> > > > > From: address@hidden
>> > > > > [mailto:address@hidden On Behalf Of
>> > > > > Alexandre Paradis
>> > > > > Sent: February 24, 2009 4:14 PM
>> > > > > To: Stuart Hughes
>> > > > > Cc: address@hidden
>> > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> > > > >
>> > > > > Hi Stuart,
>> > > > >
>> > > > > Things are moving along.. ;)
>> > > > >
>> > > > > Going forth with option #2, I performed the following as per your
>> > > > > advice
>> > > > >
>> > > > > 1. Checkout the current CVS
>> > > > > 2. Copied the MPC5121 configs from the old BSP to the latest version
>> > > > > 3. Configured my packages (the build process failed before I did the
>> > > > > next step) 4. ** Copied the *mpc5121*.spec files for u-boot and the
>> > > > > kernel from my old BSP to the latest dist/lfs/ folders
>> > > > >
>> > > > > I re-started the build process, and everything seemed to work, 
>> > > > > except when it got to the GDB package.
>> > > > >
>> > > > > It's complaining that it can't execute compiled binaries (obviously 
>> > > > > since we're cross-compiling), and says that I should add the 
>> > > > > "--host" flag:
>> > > > >
>> > > > >       checking whether the C compiler works... configure: error: 
>> > > > > cannot run C compiled programs.
>> > > > >       If you meant to cross compile, use `--host'.
>> > > > >       See `config.log' for more details.
>> > > > >       error: Bad exit status from
>> > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.74257 (%build)
>> > > > >
>> > > > > While I don’t necessarily *need* GDB, it'd be nice to have it.  
>> > > > > Where would I add this flag?
>> > > > >
>> > > > > Thanks a lot for your help!
>> > > > >
>> > > > > --
>> > > > > Alex
>> > > > >
>> > > > >
>> > > > > -----Original Message-----
>> > > > > From: Stuart Hughes [mailto:address@hidden
>> > > > > Sent: February 23, 2009 10:22 AM
>> > > > > To: Alexandre Paradis
>> > > > > Cc: address@hidden
>> > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> > > > >
>> > > > > Hi Alex,
>> > > > >
>> > > > > If you go for option 2:
>> > > > >
>> > > > > * checkout Savannah CVS
>> > > > > * do a cp -a old_bsp/config/platform/mpc5121ads
>> > > > > savannah/config/platform/
>> > > > > * cd  savannah
>> > > > > * ./ltib
>> > > > > * select mpc5121ads
>> > > > > * let it build the default and check it works for you
>> > > > > * ./ltib -m config
>> > > > > * select the X11 stuff
>> > > > > * ./ltib
>> > > > > * let it build
>> > > > >
>> > > > > The Savannah copy has nothing pre-built, so in effect you are 
>> > > > > starting from clean.
>> > > > >
>> > > > > If you want your old BSP back to it's original pristine state you 
>> > > > > can do (in old_bsp):
>> > > > > ./ltib --preconfig config/platform/mpc5121ads/defconfig
>> > > > >
>> > > > > Regards, Stuart
>> > > > >
>> > > > > On Mon, 2009-02-23 at 09:48 -0500, Alexandre Paradis wrote:
>> > > > > > The BSP is dated 2008-12-08, which seems to be the latest version 
>> > > > > > they have.
>> > > > > >
>> > > > > > I'll go for option #2.
>> > > > > >
>> > > > > > Should I clean everything since I already added packages using the 
>> > > > > > wrong commands?
>> > > > > >
>> > > > > > --
>> > > > > > Alex
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > > -----Original Message-----
>> > > > > > From: Stuart Hughes [mailto:address@hidden
>> > > > > > Sent: February 23, 2009 9:31 AM
>> > > > > > To: Alexandre Paradis
>> > > > > > Cc: address@hidden
>> > > > > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> > > > > >
>> > > > > > Hi Alex,
>> > > > > >
>> > > > > > I guess you're using an older Freescale BSP?
>> > > > > >
>> > > > > > If so your best bet is to try this:
>> > > > > >
>> > > > > > 1/ Ask Freescale if they have a later BSP (the X11 stuff went in
>> > > > > > around Nov/Dec last year IIRC).
>> > > > > >
>> > > > > > 2/ If not, use the Savannah LTIB CVS and copy the
>> > > > > > config/platform/mpc5121 you have into that copy.  I can't guarantee
>> > > > > > this will work, but at least you'll see the X11 selections.
>> > > > > >
>> > > > > > Regards, Stuart
>> > > > > >
>> > > > > > On Mon, 2009-02-23 at 08:54 -0500, Alexandre Paradis wrote:
>> > > > > > > Hi Stuart,
>> > > > > > >
>> > > > > > > I can't find X11 in the package list.  Would I need to update 
>> > > > > > > ltib for them to show up?
>> > > > > > >
>> > > > > > > Thanks,
>> > > > > > >
>> > > > > > > --
>> > > > > > > Alex
>> > > > > > >
>> > > > > > >
>> > > > > > >
>> > > > > > > -----Original Message-----
>> > > > > > > From: Stuart Hughes [mailto:address@hidden
>> > > > > > > Sent: February 23, 2009 3:52 AM
>> > > > > > > To: Alexandre Paradis
>> > > > > > > Cc: address@hidden
>> > > > > > > Subject: Re: [Ltib] Building xorg-server; missing dependencies?
>> > > > > > >
>> > > > > > > Hi Alex,
>> > > > > > >
>> > > > > > > That's the wrong way to add packages.  Run:
>> > > > > > >
>> > > > > > > $ ./ltib -m config
>> > > > > > >
>> > > > > > > Select:
>> > > > > > >
>> > > > > > >     X11  --->
>> > > > > > >     Install X11 (X.Org 7.3)  --->
>> > > > > > >
>> > > > > > > And all the packages needed will be turned on.  You probably want
>> > > > > > > to also select some kind of window manager (enlightenment maybe).
>> > > > > > > Once done, save an exit then run:
>> > > > > > >
>> > > > > > > $ ./ltib
>> > > > > > >
>> > > > > > > NOTE: ./ltib -p <pkg> is normally only used if you're developing 
>> > > > > > > a
>> > > > > > > single package.  See the FAQ.
>> > > > > > >
>> > > > > > > Regards, Stuart
>> > > > > > >
>> > > > > > > On Fri, 2009-02-20 at 15:45 -0500, Alexandre Paradis wrote:
>> > > > > > > > Hi,
>> > > > > > > >
>> > > > > > > > I need to build the xorg-server package, but I seem to be
>> > > > > > > > missing some needed packages.
>> > > > > > > >
>> > > > > > > > I'm currently using LTIB from a Freescale BSP for the MPC5121:
>> > > > > > > >
>> > > > > > > >         address@hidden
>> > > > > > > > ~/ltib/ltib-mpc5121ads-20081208/config/userspace $ cat
>> > > > > > > > ../../RELEASE_INFO
>> > > > > > > >         Release date = Fri Feb 20 20:20:58 2009 UTC
>> > > > > > > >         Release user = alex
>> > > > > > > >         Release host = dev-station
>> > > > > > > >         Release dir  = /home/alex/ltib/ltib-mpc5121ads-20081208
>> > > > > > > >         CVS wtag     = none
>> > > > > > > >         CVS tag      = none
>> > > > > > > >         Release tag  = none
>> > > > > > > >         App version  = 8.1.2
>> > > > > > > >         CVS version  = 1.421.4.1
>> > > > > > > >         git version  = none
>> > > > > > > >
>> > > > > > > > I successfully added the some dependent packages using the
>> > > > > > > > following
>> > > > > > > > commands:
>> > > > > > > >
>> > > > > > > >         ./ltib -p pixman.spec
>> > > > > > > >         ./ltib -p randrproto.spec
>> > > > > > > >         ./ltib -p renderproto.spec
>> > > > > > > >         ./ltib -p fixesproto.spec
>> > > > > > > >         ./ltib -p damageproto.spec
>> > > > > > > >         ./ltib -p xcmiscproto.spec
>> > > > > > > >         ./ltib -p extproto.spec
>> > > > > > > >         ./ltib -p xproto.spec
>> > > > > > > >         ./ltib -p xtrans.spec
>> > > > > > > >         ./ltib -p scrnsaverproto.spec
>> > > > > > > >         ./ltib -p bigreqsproto.spec
>> > > > > > > >         ./ltib -p resourceproto.spec
>> > > > > > > >         ./ltib -p fontsproto.spec
>> > > > > > > >         ./ltib -p inputproto.spec
>> > > > > > > >         ./ltib -p kbproto.spec
>> > > > > > > >         ./ltib -p videoproto.spec
>> > > > > > > >         ./ltib -p compositeproto.spec
>> > > > > > > >         ./ltib -p recordproto.spec
>> > > > > > > >         ./ltib -p resourceproto.spec
>> > > > > > > >
>> > > > > > > > However.. I'm still missing a couple of packages which I can't
>> > > > > > > > seem to find on the GPP, mainly 'xkbfile', 'xfont', 'xau' and 
>> > > > > > > > 'fontenc'.
>> > > > > > > >
>> > > > > > > > Where can I find these? Do I need to get them from a source
>> > > > > > > > tarball, and create my own package along with a .spec file?
>> > > > > > > >
>> > > > > > > > Any help is greatly appreciated.
>> > > > > > > >
>> > > > > > > > Thanks!
>> > > > > > > >
>> > > > > > > > --
>> > > > > > > > Alexandre Paradis
>> > > > > > > >
>> > > > > > > > Alexandre Paradis, Technology Architect / Architecte
>> > > > > > > > technologique
>> > > > > > > >
>> > > > > > > > bluberi gaming technologies inc.
>> > > > > > > > Drummondville, Quebec  Canada
>> > > > > > > > 819.475.5155 (telephone) 819.475.5156 (fax) bluberi.com
>> > > > > > > >
>> > > > > > > > ----------------------------------------------------------------
>> > > > > > > > --
>> > > > > > > > -------- This e-mail and any attachments transmitted with it 
>> > > > > > > > are
>> > > > > > > > personal, privileged and confidential and solely for the use 
>> > > > > > > > of the individual to whom they are addressed and intended. If 
>> > > > > > > > you have received this e-mail in error, please notify the 
>> > > > > > > > sender by return e-mail. If you are not the intended recipient 
>> > > > > > > > or if you believe that you are not, you are hereby notified 
>> > > > > > > > that the dissemination, distribution, plagiarism or copying of 
>> > > > > > > > this e-mail and attachments transmitted with it is strictly 
>> > > > > > > > prohibited. NOTICE: We have taken reasonable precautions to 
>> > > > > > > > prevent viruses from being present in this e-mail. We do not 
>> > > > > > > > accept responsibility for any loss or damage arising from the 
>> > > > > > > > use of this e-mail or attachments.
>> > > > > > > >
>> > > > > > > > Ce courriel et les pièces jointes s’y rattachant sont de 
>> > > > > > > > nature personnelle, privilégiée et confidentielle et pour 
>> > > > > > > > l’usage exclusif du destinataire à qui ils sont adressés et 
>> > > > > > > > destinés. Si vous avez reçu ce courriel par erreur, veuillez 
>> > > > > > > > s’il vous plaît le renvoyer à l’expéditeur. Si vous n’êtes pas 
>> > > > > > > > le bon destinataire ou si vous croyez ne pas l’être, nous vous 
>> > > > > > > > informons immédiatement que la publication, distribution, 
>> > > > > > > > diffusion, copie ou plagiat de ce courriel et de ses pièces 
>> > > > > > > > jointes sont strictement interdits. AVERTISSEMENT : Nous avons 
>> > > > > > > > pris des mesures raisonnables afin de prévenir toute 
>> > > > > > > > propagation de virus par le biais de ce courriel. Nous 
>> > > > > > > > n’accepterons donc aucune responsabilité pour des dommages ou 
>> > > > > > > > pertes provenant de l’utilisation de ce courriel ou de ses 
>> > > > > > > > pièces jointes.
>> > > > > > > > ----------------------------------------------------------------
>> > > > > > > > --
>> > > > > > > > --------
>> > > > > > > >
>> > > > > > > >
>> > > > > > > >
>> > > > > > > > _______________________________________________
>> > > > > > > > LTIB home page: http://bitshrine.org
>> > > > > > > >
>> > > > > > > > Ltib mailing list
>> > > > > > > > address@hidden
>> > > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
>> > > > > > > >
>> > > > > > >
>> > > > > >
>> > > > >
>> > > >
>> > >
>> > > _______________________________________________
>> > > LTIB home page: http://bitshrine.org
>> > >
>> > > Ltib mailing list
>> > > address@hidden
>> > > http://lists.nongnu.org/mailman/listinfo/ltib
>> >
>> > _______________________________________________
>> > LTIB home page: http://bitshrine.org
>> >
>> > Ltib mailing list
>> > address@hidden
>> > http://lists.nongnu.org/mailman/listinfo/ltib
>>
>
>
>
> _______________________________________________
> LTIB home page: http://bitshrine.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
>



-- 
Hamilton Vera
int Administrator (char Network[],char ComputationalSystems[]);
Seven Internet http://lib.seven.com.br
"Google is my shepherd, no want shall I know"