[Ltib] Re: asterisk / zaptel PPC

[Vadim Lebedev]

Bob,

It seems that somehow it builds for an ARM architecture ....


Thanks
Vdim
Le 3 mars 09 à 01:19, Bob a écrit :

> Vadim,
> I'm trying to put asterisk and zaptel on a mpc8315erdb. Asterisk  
> seems to
> compiling fine, since I found your .spec file. (Thanks ;) ) I'm  
> getting a
> bunch of assembly code errors in zaptel.
>
> Unfortunately, I can't even see what code is trying to be compiled  
> here. Any
> Ideas?
>
> make[2]: Leaving directory
> `/home/bob/BSP/ltib-mpc8315erdb-20080630/rpm/BUILD/zaptel-1.4.11/ 
> menuselect'
> make -C /home/bob/BSP/ltib-mpc8315erdb-20080630/rpm/BUILD/linux  
> ARCH=powerpc
> SUBDIRS=/home/bob/BSP/ltib-mpc8315erdb-20080630/rpm/BUILD/ 
> zaptel-1.4.11/kern
> el HOTPLUG_FIRMWARE=no KBUILD_OBJ_M="pciradio.o tor2.o torisa.o  
> wcfxo.o
> wct1xxp.o wctdm.o wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o  
> ztdummy.o
> ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/  
> wcte12xp/"
> modules
> make[2]: Entering directory
> `/home/bob/BSP/ltib-mpc8315erdb-20080630/rpm/BUILD/linux-2.6.24'
> /usr/bin/gcc -o
> /home/bob/BSP/ltib-mpc8315erdb-20080630/rpm/BUILD/zaptel-1.4.11/ 
> kernel/makef
> w
> /home/bob/BSP/ltib-mpc8315erdb-20080630/rpm/BUILD/zaptel-1.4.11/ 
> kernel/makef
> w.c
> /tmp/ccipHt16.s: Assembler messages:
> /tmp/ccipHt16.s:25: Error: Unrecognized opcode: `leal'
> /tmp/ccipHt16.s:26: Error: Unrecognized opcode: `andl'
> /tmp/ccipHt16.s:27: Error: Unrecognized opcode: `pushl'
> /tmp/ccipHt16.s:28: Error: Unrecognized opcode: `pushl'
> /tmp/ccipHt16.s:29: Error: Unrecognized opcode: `movl'
>
>
> Did you ever get some hardware to try this on?
>
> Thanks
>
> Bob Conklin
> Rhino Equipment Corp.
> address@hidden
> Tel: +1 (480) 621-4014 Direct Dial
>   +1 (480) 621-4000, +1 (877) RHINO-T1, Ext. 6353
> FAX: +1 (480) 961-1826
> IP: asterisk.rhinoequipment.com x6353
> FWD: 633686 x6353
> THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE  
> PROPRIETARY
> MATERIAL and is thus for use only by the intended recipient. If you
> received this in error, please contact the sender  and delete the  
> email
> and its attachments from all computers.