Re: [Ltib] Building xorg-server; missing dependencies?

[Hamilton Vera]

Hi Stuart.

As soon as make things work properly and discover what changes are
effective I will build a documentation and post here,  and ask someone
to post at http://www.imxdev.org .

Thanks !



On Wed, Mar 4, 2009 at 5:40 AM, Stuart Hughes <address@hidden> wrote:
> Hi Hamilton,
>
> Thanks for the update, glad it's working now.  Hopefully Alan's advice
> will get your touchscreen working.
>
> Maybe when you're finished you can make a patch with your changes and
> send a note about how to set this up.  I can then try to integrate it so
> that the knowledge is shared.
>
> Regards, Stuart
>
> On Tue, 2009-03-03 at 16:54 -0300, Hamilton Vera wrote:
>> Hi Stuart, thanks for everything.
>>
>> E17 is now running on iMX27, I don know exactly what I did, I've
>> modified some files, the last one was
>>
>> ./BUILD/xorg-server-1.4.2.mod/hw/kdrive/src/kmode.c
>>
>> I just add the mode 240X320
>>
>>
>>     {   240,    320,    60,     16256,
>>                     17,     12,     32,     KdSyncNegative,
>>                     1,      11,     14,     KdSyncNegative,
>>     },
>>
>> I will try to build everything step by step to verify.
>>
>> Now I need to make the touchscreen work. When I start the Xfbdev i got
>> the message "selected device is not a touchscreen I understand"
>>
>> Xfbdev -screen 240x320x60  -mouse tslib,,device=/dev/ts
>> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
>> _XSERVTransOpen: transport open failed for inet6/mxt01:0
>> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
>> (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base  <*>
>>  MXC touchscreen input driver
>> Couldn't find keyboard driver keybd
>> selected device is not a touchscreen I understand
>>
>>
>> I have compiled the kernel with TS support
>>
>> <*>   MXC touchscreen input driver
>>
>> The Qtopia TouchScreen is working pretty fine.
>>
>> Thanks once more.
>>
>>
>> On Tue, Mar 3, 2009 at 5:49 AM, Stuart Hughes <address@hidden> wrote:
>> > Hi Hamilton,
>> >
>> > Not sure what's happening here.  Are you sure you built the X server
>> > without ts support?
>> >
>> > A couple of suggestions:
>> >
>> > * try this from an ssh login session, that way you keep your terminal
>> > for control.  You can then run each step by hand.  For example, start
>> > Xfbdev and make sure that looks right (X with no window manager) and
>> > then start the wm.
>> >
>> > * Instead of enlightenment, try twm to start, that's simpler and may
>> > show up what's going wrong.
>> >
>> > Regards, Stuart
>> >
>> > On Mon, 2009-03-02 at 19:46 -0300, Hamilton Vera wrote:
>> >> Hi Stuart, thanks for helping
>> >>
>> >> I changed your script to the following
>> >>
>> >>
>> >> cat /usr/bin/startx
>> >>
>> >> #!/bin/sh
>> >> ln -s /dev/vc/0 /dev/tty0
>> >> ln -s /dev/vc/1 /dev/tty1
>> >> ln -s /dev/vc/2 /dev/tty2
>> >> #Xfbdev -screen 480x640x16 -mouse tslib,,device=/dev/ts &
>> >> Xfbdev -ac -mouse mouse -keybd keyboard &
>> >> sleep 3
>> >> DISPLAY=:0 enlightenment_start
>> >> killall Xfbdev
>> >>
>> >>
>> >> It does not work yet, the screen just get gray.
>> >>
>> >> I've compiled all E17 and X11 packages
>> >>
>> >>
>> >> Here goes the output
>> >>
>> >> >>>
>> >> _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
>> >> _XSERVTransOpen: transport open failed for inet6/freescale:0
>> >> _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
>> >> (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base
>> >> Couldn't find keyboard driver keybd
>> >> (EE) XKB: Couldn't open rules file /usr/share/X11/xkb/rules/base
>> >> E - PID=1783, do_precache=0
>> >> ESTART: 0.00007 [0.00007] - begin
>> >> ESTART: 0.00162 [0.00155] - signals done
>> >> ESTART: 0.00376 [0.00214] - determine prefix
>> >> DYNAMIC DETERMINED PREFIX: /usr
>> >> ESTART: 0.01592 [0.01216] - prefix done
>> >> ESTART: 0.01701 [0.00109] - intl init
>> >> ESTART: 0.01810 [0.00109] - parse args
>> >> ESTART: 0.01849 [0.00038] - arg parse done
>> >> ESTART: 0.02191 [0.00342] - ecore init
>> >> ESTART: 0.03037 [0.00846] - ecore_file init
>> >> ESTART: 0.03218 [0.00181] - more ecore
>> >> ESTART: 0.03267 [0.00049] - x connect
>> >> ESTART: 0.10584 [0.07317] - ecore_con
>> >> ESTART: 0.10704 [0.00120] - xinerama
>> >> E17 INIT: XINERAMA CHOSEN: [0], 480x640+0+0
>> >> ESTART: 0.11118 [0.00414] - x hints
>> >> ESTART: 0.11769 [0.00651] - x hints done
>> >> ESTART: 0.11792 [0.00023] - ecore_evas init
>> >> ESTART: 0.14957 [0.03165] - test done
>> >> ESTART: 0.14995 [0.00038] - efreet
>> >> ESTART: 0.15595 [0.00600] - efreet done
>> >> ESTART: 0.15640 [0.00045] - configure
>> >> ESTART: 0.15803 [0.00163] - dirs
>> >> ESTART: 0.18625 [0.02823] - filereg
>> >> ESTART: 0.18669 [0.00044] - config
>> >> ESTART: 0.22035 [0.03366] - scale
>> >> ESTART: 0.22118 [0.00082] - pointer
>> >> ESTART: 0.22148 [0.00030] - path
>> >> ESTART: 0.22262 [0.00114] - ipc
>> >> INFO: E_IPC_SOCKET=/tmp/enlightenment-root/disp-:0.0-1783
>> >> ESTART: 0.23067 [0.00805] - font
>> >> ESTART: 0.23279 [0.00212] - theme
>> >> ESTART: 0.33171 [0.09891] - splash
>> >> RUN INIT: /usr/bin/enlightenment_init
>> >> '/usr/share/enlightenment/data/init/default.edj' '1' '0'
>> >> 'Enlightenment' '0.16.999.050'
>> >> E17 INIT: XINERAMA CHOSEN: [0], 480x640+0+0
>> >> ESTART: 9.04460 [8.71289] - test file format support
>> >> ESTART: 9.23795 [0.19335] - msgbus
>> >> ESTART: 9.23845 [0.00050] - intl post
>> >> ESTART: 9.29538 [0.05692] - efreet paths
>> >> ESTART: 9.29673 [0.00135] - efreet paths done
>> >> ESTART: 9.29715 [0.00043] - thumb init
>> >> ESTART: 9.29751 [0.00035] - sys init
>> >> ESTART: 9.29794 [0.00043] - actions
>> >> ESTART: 9.30532 [0.00738] - bindings
>> >> ESTART: 9.30764 [0.00232] - popup
>> >> ESTART: 9.30802 [0.00038] - bg
>> >> ESTART: 9.30869 [0.00066] - screens
>> >> ESTART: 9.30888 [0.00020] - screens: atoms
>> >> ESTART: 9.31215 [0.00326] - screens: manager
>> >> ESTART: 9.31261 [0.00046] - screens: container
>> >> ESTART: 9.31292 [0.00031] - screens: zone
>> >> ESTART: 9.31314 [0.00022] - screens: desk
>> >> ESTART: 9.31330 [0.00015] - screens: menu
>> >> ESTART: 9.31352 [0.00022] - screens: exehist
>> >> ESTART: 9.31390 [0.00039] - screens: get roots
>> >> ESTART: 9.31413 [0.00023] - screens: focus
>> >> ESTART: 9.31428 [0.00015] - screens: border
>> >> ESTART: 9.31477 [0.00049] - screens: win
>> >> ESTART: 9.31501 [0.00025] - screens: manage roots
>> >> ESTART: 10.51326 [1.19824] - screens: sync
>> >> ESTART: 10.51504 [0.00179] - exec
>> >> ESTART: 10.51544 [0.00040] - remember
>> >> ESTART: 10.51563 [0.00020] - container freeze
>> >> ESTART: 10.51611 [0.00048] - fm2
>> >> ESTART: 10.53875 [0.02264] - msg
>> >> ESTART: 10.53925 [0.00051] - dnd
>> >> ESTART: 10.53968 [0.00043] - grabinput
>> >> ESTART: 10.53994 [0.00026] - modules
>> >> ESTART: 10.54016 [0.00022] - colorclasses
>> >> ESTART: 10.54053 [0.00036] - gadcon
>> >> ESTART: 10.54076 [0.00023] - shelves
>> >> ESTART: 10.54105 [0.00029] - dpms
>> >> ESTART: 10.54170 [0.00065] - screensaver
>> >> ESTART: 10.54231 [0.00061] - mouse
>> >> ESTART: 10.54437 [0.00206] - desklock
>> >> ESTART: 10.54503 [0.00066] - order
>> >> ESTART: 10.54531 [0.00028] - powersave
>> >> ESTART: 10.54550 [0.00019] - add idle enterers
>> >> ESTART: 10.55083 [0.00533] - init properites
>> >> ESTART: 10.55239 [0.00156] - test code
>> >> ESTART: 10.55269 [0.00031] - load modules
>> >> ESTART: 10.98668 [0.43399] - shelf config init
>> >> ESTART: 12.18039 [1.19371] - MAIN LOOP AT LAST
>> >> ESTART: 13.78741 [1.60702] - SLEEP
>> >> DYNAMIC DETERMINED PREFIX: /usr
>> >> <<<
>> >>
>> >> If I hit the ctrl+c
>> >> <<<< Enlightenment Error >>>>
>> >> Lost X connection.
>> >> Can't deallocate console 2 errno 16
>> >> killall: Xfbdev: no process killed
>> >>
>> >>
>> >> I am reviewing my steps, but no hint yet. Still working on iMX27 :)
>> >>
>> >> I appreciate any help
>> >>
>> >> Thanks very much.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >> On Sat, Feb 28, 2009 at 7:21 AM, Stuart Hughes <address@hidden> wrote:
>> >> > Hi Hamilton,
>> >> >
>> >> > Unfortunately that BSP chooses to override the main skell package in
>> >> > it's pkg_map.  The standard one has startx.
>> >> >
>> >> > For now, simply add this into your rootfs (you could locally add it as
>> >> > an extra source to the skell you use):
>> >> >
>> >> > #!/bin/sh
>> >> >
>> >> > Xfbdev -ac -mouse mouse -keybd keyboard &
>> >> > sleep 3
>> >> > DISPLAY=:0 twm
>> >> > killall Xfbdev
>> >> >
>> >> > Regards, Stuart
>> >> >
>> >> >
>> >> > On Fri, 2009-02-27 at 17:01 -0300, Hamilton Vera wrote:
>> >> >> Hi Stuart, where can I find the "startx" program?
>> >> >>
>> >> >> I am testing the same packages for iMX27.
>> >> >>
>> >> >> Do I need to build the " build full Xorg (experimental only)" to make 
>> >> >> it work?
>> >> >>
>> >> >> Till now, no problem with the evas package.
>> >> >>
>> >> >> Thanks in advance.
>> >> >>
>> >> >> On Thu, Feb 26, 2009 at 2:48 PM, Stuart Hughes <address@hidden> wrote:
>> >> >> > Hi Alex,
>> >> >> >
>> >> >> > You need to install some host components first, see:
>> >> >> >
>> >> >> > http://www.libertatia.org/blog/?p=66
>> >> >> >
>> >> >> > Basically:
>> >> >> >
>> >> >> >    $ ./ltib –hostcf -p eet.spec
>> >> >> >        $ ./ltib –hostcf -p embryo.spec
>> >> >> >        $ ./ltib –hostcf -p evas.spec
>> >> >> >        $ ./ltib –hostcf -p ecore.spec
>> >> >> >        $ ./ltib –hostcf -p edje.spec
>> >> >> >
>> >> >> > The startup instructions are out of date, all you need to do is 
>> >> >> > 'startx'
>> >> >> > last time I tried.
>> >> >> >
>> >> >> > Regards, Stuart
>> >> >> >
>> >> >> > On Thu, 2009-02-26 at 12:31 -0500, Alexandre Paradis wrote:
>> >> >> >> Hi Stuart,
>> >> >> >>
>> >> >> >> The libjpeg built successfully, thanks.
>> >> >> >>
>> >> >> >> I'm at currently at building enlightenment, and the "emotion" 
>> >> >> >> package failed to build:
>> >> >> >>
>> >> >> >> [snip...]
>> >> >> >> Making all in data
>> >> >> >> make[2]: Entering directory 
>> >> >> >> `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
>> >> >> >> edje_cc -v -id ../data -fd ../data \
>> >> >> >>         ../data/theme.edc \
>> >> >> >>         ../data/theme.edj
>> >> >> >> make[2]: edje_cc: Command not found
>> >> >> >> make[2]: *** [theme.edj] Error 127
>> >> >> >> make[2]: Leaving directory 
>> >> >> >> `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042/data'
>> >> >> >> make[1]: *** [all-recursive] Error 1
>> >> >> >> make[1]: Leaving directory 
>> >> >> >> `/home/alex/savannah/ltib/rpm/BUILD/emotion-0.1.0.042'
>> >> >> >> make: *** [all] Error 2
>> >> >> >> error: Bad exit status from 
>> >> >> >> /home/alex/savannah/ltib/tmp/rpm-tmp.88468 (%build)
>> >> >> >>
>> >> >> >>
>> >> >> >> RPM build errors:
>> >> >> >>     Bad exit status from /home/alex/savannah/ltib/tmp/rpm-tmp.88468 
>> >> >> >> (%build)
>> >> >> >> Build time for emotion: 14 seconds
>> >> >> >>
>> >> >> >> Failed building emotion
>> >> >> >>
>> >> >> >>
>> >> >> >> f_buildrpms() returned an error, exiting
>> >> >> >> traceback:
>> >> >> >>  main:552
>> >> >> >>
>> >> >> >>
>> >> >> >> Started: Thu Feb 26 12:19:41 2009
>> >> >> >> Ended:   Thu Feb 26 13:27:17 2009
>> >> >> >> Elapsed: 4056 seconds
>> >> >> >>
>> >> >> >> These packages failed to build:
>> >> >> >> emotion
>> >> >> >>
>> >> >> >> Build Failed
>> >> >> >>
>> >> >> >> Exiting on error or interrupt
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> The edje package built successfully, and I do have "edje_cc" in my 
>> >> >> >> root fs:
>> >> >> >> address@hidden ~/savannah/ltib $ locate edje_cc
>> >> >> >> /home/alex/savannah/ltib/rootfs/usr/bin/edje_cc
>> >> >> >>
>> >> >> >> Any ideas?
>> >> >> >>
>> >> >> >> Thanks!
>> >> >> >> --
>> >> >> >> Alex
>> >> >> >>
>> >> >> >> -----Original Message-----
>> >> >> >> From: Stuart Hughes [mailto:address@hidden
>> >> >> >> Sent: February 26, 2009 10:40 AM
>> >> >> >> To: Alexandre Paradis
>> >> >> >> Cc: address@hidden
>> >> >> >> Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> >> >> >>
>> >> >> >> Hi Alex,
>> >> >> >>
>> >> >> >> Glad it was something straightforward.  I'd be inclined to not trust
>> >> >> >> anything you built so far and do (save any work first!)
>> >> >> >>
>> >> >> >> $ rm -rf rpm/BUILD/*
>> >> >> >> $ ./ltib -f
>> >> >> >>
>> >> >> >> This will force rebuild everything.
>> >> >> >>
>> >> >> >> Regards, Stuart
>> >> >> >>
>> >> >> >> On Thu, 2009-02-26 at 10:12 -0500, Alexandre Paradis wrote:
>> >> >> >> > Hi Stuart
>> >> >> >> >
>> >> >> >> > You're right, I had a misconfiguration on my system.
>> >> >> >> >
>> >> >> >> > When I did the commands in the ltib shell, it displayed the 
>> >> >> >> > powerpc gcc, not my native one.
>> >> >> >> >
>> >> >> >> > The problem was that for some reason I can't remember, I had made 
>> >> >> >> > dynamic links to various powerpc-e300c3-linux-gnu-* files, one of 
>> >> >> >> > them with the name "gcc".
>> >> >> >> >
>> >> >> >> > Stupid mistake of mine, I removed them and now your test shows 
>> >> >> >> > the correct gcc version (my native one).
>> >> >> >> >
>> >> >> >> > Thanks a LOT for your help.  I'll try building again.
>> >> >> >> >
>> >> >> >> > --
>> >> >> >> > Alex
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > -----Original Message-----
>> >> >> >> > From: Stuart Hughes [mailto:address@hidden
>> >> >> >> > Sent: February 26, 2009 8:43 AM
>> >> >> >> > To: Alexandre Paradis
>> >> >> >> > Cc: address@hidden
>> >> >> >> > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> >> >> >> >
>> >> >> >> > Hi Alex,
>> >> >> >> >
>> >> >> >> > I just tried the same thing (copy config/platform/mpc5121ads -> 
>> >> >> >> > Savannah
>> >> >> >> > CVS copy).  I then ran ltib to configure and build this.  It 
>> >> >> >> > builds
>> >> >> >> > libjpeg without any problem.
>> >> >> >> >
>> >> >> >> > Processing platform: Freescale MPC512x based boards
>> >> >> >> > =====================================================
>> >> >> >> > using config/platform/mpc5121ads/.config
>> >> >> >> > [snip]
>> >> >> >> > Executing(%build): /bin/sh
>> >> >> >> > -e /home/seh/ltib_bsps/savannah_ltib/tmp/rpm-tmp.60945
>> >> >> >> > + umask 022
>> >> >> >> > + cd /home/seh/ltib_bsps/savannah_ltib/rpm/BUILD
>> >> >> >> > + cd jpeg-6b
>> >> >> >> > + export
>> >> >> >> > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin
>> >> >> >> > +
>> >> >> >> > PATH=/home/seh/ltib_bsps/savannah_ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-eglibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin
>> >> >> >> > + ./configure --enable-static --enable-shared 
>> >> >> >> > --target=powerpc-linux
>> >> >> >> > --prefix=/usr
>> >> >> >> > checking for gcc... gcc
>> >> >> >> > checking whether the C compiler (gcc  ) works... yes
>> >> >> >> > checking whether the C compiler (gcc  ) is a cross-compiler... no
>> >> >> >> > checking whether we are using GNU C... yes
>> >> >> >> > checking how to run the C preprocessor... gcc -E
>> >> >> >> > checking for function prototypes... yes
>> >> >> >> > checking for stddef.h... yes
>> >> >> >> > ...
>> >> >> >> >
>> >> >> >> > The key difference between this and your output is:
>> >> >> >> >
>> >> >> >> > checking whether the C compiler (gcc  ) is a cross-compiler... no
>> >> >> >> >
>> >> >> >> > You're says:
>> >> >> >> > >> checking whether the C compiler (gcc  ) is a cross-compiler... 
>> >> >> >> > >> yes
>> >> >> >> >
>> >> >> >> > It looks like you have some miss configuration as it should be 
>> >> >> >> > finding
>> >> >> >> > the build machines native C compiler.
>> >> >> >> >
>> >> >> >> > Let me explain a bit.   If you look at the spec file you'll see:
>> >> >> >> >
>> >> >> >> > %Build
>> >> >> >> > export PATH=$UNSPOOF_PATH
>> >> >> >> > ./configure --enable-static --enable-shared --target=$CFGHOST 
>> >> >> >> > --prefix=
>> >> >> >> > %{_prefix}
>> >> >> >> > export PATH=$SPOOF_PATH
>> >> >> >> > make
>> >> >> >> >
>> >> >> >> > This is a bit unusual inasmuch that configure is done without 
>> >> >> >> > spoofing
>> >> >> >> > (e.g. gcc is not an alias for the cross compiler, or should not 
>> >> >> >> > be).
>> >> >> >> > >From my notes this is because:
>> >> >> >> >
>> >> >> >> > Get libjpeg to cross compile by using UNSPOOF_PATH for 
>> >> >> >> > ./configure and
>> >> >> >> > SPOOF_PATH for make.  All this is necessary because ./configure 
>> >> >> >> > calls
>> >> >> >> > ltconfig which inturn calls config.guess which trys to compile 
>> >> >> >> > and run a
>> >> >> >> > test .c program using the first gcc in its path.
>> >> >> >> >
>> >> >> >> > To get to the bottom of this, can you run the following:
>> >> >> >> >
>> >> >> >> > $ ./ltib -m shell
>> >> >> >> > LTIB> export PATH=$UNSPOOF_PATH
>> >> >> >> > LTIB> which gcc
>> >> >> >> > ...
>> >> >> >> > LTIB> gcc -v
>> >> >> >> > ...
>> >> >> >> > LTIB> exit
>> >> >> >> > $
>> >> >> >> >
>> >> >> >> > The output will show which compiler gcc is.  It should be the 
>> >> >> >> > native one
>> >> >> >> > on your build machine.  For example mine shows:
>> >> >> >> >
>> >> >> >> > LTIB> which gcc
>> >> >> >> > /usr/bin/gcc
>> >> >> >> >
>> >> >> >> > LTIB> gcc -v
>> >> >> >> > Using built-in specs.
>> >> >> >> > Target: i386-redhat-linux
>> >> >> >> > Configured with: ../configure --prefix=/usr 
>> >> >> >> > --mandir=/usr/share/man
>> >> >> >> > --infodir=/usr/share/info --enable-shared --enable-threads=posix
>> >> >> >> > --enable-checking=release --with-system-zlib --enable-__cxa_atexit
>> >> >> >> > --disable-libunwind-exceptions --enable-libgcj-multifile
>> >> >> >> > --enable-languages=c,c++,objc,java,f95,ada --enable-java-awt=gtk
>> >> >> >> > --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre
>> >> >> >> > --host=i386-redhat-linux
>> >> >> >> > Thread model: posix
>> >> >> >> > gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)
>> >> >> >> >
>> >> >> >> > Regards, Stuart
>> >> >> >> >
>> >> >> >> > On Wed, 2009-02-25 at 11:23 -0500, Alexandre Paradis wrote:
>> >> >> >> > > Hi Stuart,
>> >> >> >> > >
>> >> >> >> > > Here is the LTIB output using Savannah CVS, and my config file.
>> >> >> >> > >
>> >> >> >> > > Thanks,
>> >> >> >> > >
>> >> >> >> > > --
>> >> >> >> > > Alex
>> >> >> >> > >
>> >> >> >> > > -----Original Message-----
>> >> >> >> > > From: Stuart Hughes [mailto:address@hidden
>> >> >> >> > > Sent: February 25, 2009 9:50 AM
>> >> >> >> > > To: Alexandre Paradis
>> >> >> >> > > Cc: address@hidden
>> >> >> >> > > Subject: RE: [Ltib] Building xorg-server; missing dependencies?
>> >> >> >> > >
>> >> >> >> > > Hi Alex,
>> >> >> >> > >
>> >> >> >> > > You're on the wrong track here I think.  You should not need to 
>> >> >> >> > > do this.
>> >> >> >> > >
>> >> >> >> > > Anything under rpm/BUILD is not under CVS and so is generated.  
>> >> >> >> > > If this
>> >> >> >> > > build is failing, removed rpm/BUILD/_failed_package_ and then 
>> >> >> >> > > re-try.
>> >> >> >> > >
>> >> >> >> > > If that doesn't work please post the LTIB output.  I need to 
>> >> >> >> > > know the
>> >> >> >> > > command you ran, which LTIB (Savannah?) and also which 
>> >> >> >> > > configuration
>> >> >> >> > > you're using (cat .config and then send me
>> >> >> >> > > config/platform/_target_/.config)
>> >> >> >> > >
>> >> >> >> > > Regards, Stuart
>> >> >> >> > >
>> >> >> >> > > On Wed, 2009-02-25 at 09:27 -0500, Alexandre Paradis wrote:
>> >> >> >> > > > OK, I fixed it by replacing the config.sub and config.guess 
>> >> >> >> > > > from 
>> >> >> >> > > > http://cvs.savannah.gnu.org/viewvc/~checkout~/config/config/
>> >> >> >> > > >
>> >> >> >> > > > I replaced them in the 
>> >> >> >> > > > /home/alex/savannah/ltib/rpm/BUILD/jpeg-6b then re-ran ./ltib
>> >> >> >> > > >
>> >> >> >> > > > Is this something that would need to be added to the GPP 
>> >> >> >> > > > package?
>> >> >> >> > > >
>> >> >> >> > > > --
>> >> >> >> > > > Alex
>> >> >> >> > > >
>> >> >> >> > > > -----Original Message-----
>> >> >> >> > > > From: address@hidden [mailto:address@hidden On Behalf Of 
>> >> >> >> > > > Alexandre Paradis
>> >> >> >> > > > Sent: February 25, 2009 9:01 AM
>> >> >> >> > > > To: Stuart Hughes
>> >> >> >> > > > Cc: address@hidden
>> >> >> >> > > > Subject: RE: [Ltib] Building xorg-server; missing 
>> >> >> >> > > > dependencies?
>> >> >> >> > > >
>> >> >> >> > > > Hi Stuart,
>> >> >> >> > > >
>> >> >> >> > > > libjpeg failed to build:
>> >> >> >> > > >
>> >> >> >> > > > /// OUTPUT ///
>> >> >> >> > > > checking host system type... ./config.guess: line 618: 
>> >> >> >> > > > ./dummy: cannot execute binary file
>> >> >> >> > > > ./config.guess: line 848: ./dummy: cannot execute binary file
>> >> >> >> > > > ltconfig: cannot guess host type; you must specify one Try 
>> >> >> >> > > > `ltconfig --help' for more information.
>> >> >> >> > > > checking libjpeg version number... 62
>> >> >> >> > > > creating ./config.status
>> >> >> >> > > > creating Makefile
>> >> >> >> > > > creating jconfig.h
>> >> >> >> > > > + export
>> >> >> >> > > > + 
>> >> >> >> > > > PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
>> >> >> >> > > > + 
>> >> >> >> > > > nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
>> >> >> >> > > > + 
>> >> >> >> > > > ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
>> >> >> >> > > > + :/usr/bin/X11:/usr/X11R6/bin
>> >> >> >> > > > + 
>> >> >> >> > > > PATH=/home/alex/savannah/ltib/bin:/opt/ltib/usr/spoof:/home/alex/savan
>> >> >> >> > > > + 
>> >> >> >> > > > nah/ltib/bin:/opt/ltib/usr/bin:/opt/freescale/usr/local/gcc-4.1.78-egl
>> >> >> >> > > > + 
>> >> >> >> > > > ibc-2.5.78-1/powerpc-e300c3-linux-gnu/bin:/usr/local/bin:/usr/bin:/bin
>> >> >> >> > > > + :/usr/bin/X11:/usr/X11R6/bin
>> >> >> >> > > > + make
>> >> >> >> > > > ./libtool --mode=compile gcc -O2  -I. -c ./jcapimin.c
>> >> >> >> > > > make: ./libtool: Command not found
>> >> >> >> > > > make: *** [jcapimin.lo] Error 127
>> >> >> >> > > > error: Bad exit status from 
>> >> >> >> > > > /home/alex/savannah/ltib/tmp/rpm-tmp.15054 (%build)
>> >> >> >> > > >
>> >> >> >> > > >
>> >> >> >> > > > RPM build errors:
>> >> >> >> > > >     Bad exit status from 
>> >> >> >> > > > /home/alex/savannah/ltib/tmp/rpm-tmp.15054 (%build) Build 
>> >> >> >> > > > time for libjpeg: 2 seconds /// END OUTPUT ///
>> >> >> >> > > >
>> >> >> >> > > >
>> >> >> >> > > > I do have libtool installed on my system, but it seems it's 
>> >> >> >> > > > trying to run it from the local folder? (./libtool)
>> >> >> >> > > >
>> >> >> >> > > >
>> >> >> >> > > > --
>> >> >> >> > > > Alex
>> >> >> >> > > >
>> >> >> >> > > > -----Original Message-----
>> >> >> >> > > > From: Stuart Hughes [mailto:address@hidden
>> >> >> >> > > > Sent: February 25, 2009 4:00 AM
>> >> >> >> > > > To: Alexandre Paradis
>> >> >> >> > > > Cc: address@hidden
>> >> >> >> > > > Subject: RE: [Ltib] Building xorg-server; missing 
>> >> >> >> > > > dependencies?
>> >> >> >> > > >
>> >> >> >> > > > Hi Alex,
>> >> >> >> > > >
>> >> >> >> > > > cross-gdb/gdbserver should also build.  If you want those 
>> >> >> >> > > > later we can try to debug what is wrong.
>> >> >> >> > > >
>> >> >> >> > > > Regards, Stuart
>> >> >> >> > > >
>> >> >> >> > > > On Tue, 2009-02-24 at 16:44 -0500, Alexandre Paradis wrote:
>> >> >> >> > > > > I think I just selected the wrong gdb package in the list.
>> >> >> >> > > > >
>> >> >> >> > > > > I'm rebuilding with the native gdb package instead (without 
>> >> >> >> > > > > cross-gdb
>> >> >> >> > > > > and gdbserver), and it didn't stop this time, so you can 
>> >> >> >> > > > > ignore my
>> >> >> >> > > > > last question ;)
>> >> >> >> > > > >
>> >> >> >> > > > > --
>> >> >> >> > > > > Alex
>> >> >> >> > > > >
>> >> >> >> > > > > -----Original Message-----
>> >> >> >> > > > > From: address@hidden
>> >> >> >> > > > > [mailto:address@hidden On Behalf Of
>> >> >> >> > > > > Alexandre Paradis
>> >> >> >> > > > > Sent: February 24, 2009 4:14 PM
>> >> >> >> > > > > To: Stuart Hughes
>> >> >> >> > > > > Cc: address@hidden
>> >> >> >> > > > > Subject: RE: [Ltib] Building xorg-server; missing 
>> >> >> >> > > > > dependencies?
>> >> >> >> > > > >
>> >> >> >> > > > > Hi Stuart,
>> >> >> >> > > > >
>> >> >> >> > > > > Things are moving along.. ;)
>> >> >> >> > > > >
>> >> >> >> > > > > Going forth with option #2, I performed the following as 
>> >> >> >> > > > > per your
>> >> >> >> > > > > advice
>> >> >> >> > > > >
>> >> >> >> > > > > 1. Checkout the current CVS
>> >> >> >> > > > > 2. Copied the MPC5121 configs from the old BSP to the 
>> >> >> >> > > > > latest version
>> >> >> >> > > > > 3. Configured my packages (the build process failed before 
>> >> >> >> > > > > I did the
>> >> >> >> > > > > next step) 4. ** Copied the *mpc5121*.spec files for u-boot 
>> >> >> >> > > > > and the
>> >> >> >> > > > > kernel from my old BSP to the latest dist/lfs/ folders
>> >> >> >> > > > >
>> >> >> >> > > > > I re-started the build process, and everything seemed to 
>> >> >> >> > > > > work, except when it got to the GDB package.
>> >> >> >> > > > >
>> >> >> >> > > > > It's complaining that it can't execute compiled binaries 
>> >> >> >> > > > > (obviously since we're cross-compiling), and says that I 
>> >> >> >> > > > > should add the "--host" flag:
>> >> >> >> > > > >
>> >> >> >> > > > >       checking whether the C compiler works... configure: 
>> >> >> >> > > > > error: cannot run C compiled programs.
>> >> >> >> > > > >       If you meant to cross compile, use `--host'.
>> >> >> >> > > > >       See `config.log' for more details.
>> >> >> >> > > > >       error: Bad exit status from
>> >> >> >> > > > > /home/alex/savannah/ltib/tmp/rpm-tmp.74257 (%build)
>> >> >> >> > > > >
>> >> >> >> > > > > While I don’t necessarily *need* GDB, it'd be nice to have 
>> >> >> >> > > > > it.  Where would I add this flag?
>> >> >> >> > > > >
>> >> >> >> > > > > Thanks a lot for your help!
>> >> >> >> > > > >
>> >> >> >> > > > > --
>> >> >> >> > > > > Alex
>> >> >> >> > > > >
>> >> >> >> > > > >
>> >> >> >> > > > > -----Original Message-----
>> >> >> >> > > > > From: Stuart Hughes [mailto:address@hidden
>> >> >> >> > > > > Sent: February 23, 2009 10:22 AM
>> >> >> >> > > > > To: Alexandre Paradis
>> >> >> >> > > > > Cc: address@hidden
>> >> >> >> > > > > Subject: RE: [Ltib] Building xorg-server; missing 
>> >> >> >> > > > > dependencies?
>> >> >> >> > > > >
>> >> >> >> > > > > Hi Alex,
>> >> >> >> > > > >
>> >> >> >> > > > > If you go for option 2:
>> >> >> >> > > > >
>> >> >> >> > > > > * checkout Savannah CVS
>> >> >> >> > > > > * do a cp -a old_bsp/config/platform/mpc5121ads
>> >> >> >> > > > > savannah/config/platform/
>> >> >> >> > > > > * cd  savannah
>> >> >> >> > > > > * ./ltib
>> >> >> >> > > > > * select mpc5121ads
>> >> >> >> > > > > * let it build the default and check it works for you
>> >> >> >> > > > > * ./ltib -m config
>> >> >> >> > > > > * select the X11 stuff
>> >> >> >> > > > > * ./ltib
>> >> >> >> > > > > * let it build
>> >> >> >> > > > >
>> >> >> >> > > > > The Savannah copy has nothing pre-built, so in effect you 
>> >> >> >> > > > > are starting from clean.
>> >> >> >> > > > >
>> >> >> >> > > > > If you want your old BSP back to it's original pristine 
>> >> >> >> > > > > state you can do (in old_bsp):
>> >> >> >> > > > > ./ltib --preconfig config/platform/mpc5121ads/defconfig
>> >> >> >> > > > >
>> >> >> >> > > > > Regards, Stuart
>> >> >> >> > > > >
>> >> >> >> > > > > On Mon, 2009-02-23 at 09:48 -0500, Alexandre Paradis wrote:
>> >> >> >> > > > > > The BSP is dated 2008-12-08, which seems to be the latest 
>> >> >> >> > > > > > version they have.
>> >> >> >> > > > > >
>> >> >> >> > > > > > I'll go for option #2.
>> >> >> >> > > > > >
>> >> >> >> > > > > > Should I clean everything since I already added packages 
>> >> >> >> > > > > > using the wrong commands?
>> >> >> >> > > > > >
>> >> >> >> > > > > > --
>> >> >> >> > > > > > Alex
>> >> >> >> > > > > >
>> >> >> >> > > > > >
>> >> >> >> > > > > >
>> >> >> >> > > > > > -----Original Message-----
>> >> >> >> > > > > > From: Stuart Hughes [mailto:address@hidden
>> >> >> >> > > > > > Sent: February 23, 2009 9:31 AM
>> >> >> >> > > > > > To: Alexandre Paradis
>> >> >> >> > > > > > Cc: address@hidden
>> >> >> >> > > > > > Subject: RE: [Ltib] Building xorg-server; missing 
>> >> >> >> > > > > > dependencies?
>> >> >> >> > > > > >
>> >> >> >> > > > > > Hi Alex,
>> >> >> >> > > > > >
>> >> >> >> > > > > > I guess you're using an older Freescale BSP?
>> >> >> >> > > > > >
>> >> >> >> > > > > > If so your best bet is to try this:
>> >> >> >> > > > > >
>> >> >> >> > > > > > 1/ Ask Freescale if they have a later BSP (the X11 stuff 
>> >> >> >> > > > > > went in
>> >> >> >> > > > > > around Nov/Dec last year IIRC).
>> >> >> >> > > > > >
>> >> >> >> > > > > > 2/ If not, use the Savannah LTIB CVS and copy the
>> >> >> >> > > > > > config/platform/mpc5121 you have into that copy.  I can't 
>> >> >> >> > > > > > guarantee
>> >> >> >> > > > > > this will work, but at least you'll see the X11 
>> >> >> >> > > > > > selections.
>> >> >> >> > > > > >
>> >> >> >> > > > > > Regards, Stuart
>> >> >> >> > > > > >
>> >> >> >> > > > > > On Mon, 2009-02-23 at 08:54 -0500, Alexandre Paradis 
>> >> >> >> > > > > > wrote:
>> >> >> >> > > > > > > Hi Stuart,
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > I can't find X11 in the package list.  Would I need to 
>> >> >> >> > > > > > > update ltib for them to show up?
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > Thanks,
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > --
>> >> >> >> > > > > > > Alex
>> >> >> >> > > > > > >
>> >> >> >> > > > > > >
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > -----Original Message-----
>> >> >> >> > > > > > > From: Stuart Hughes [mailto:address@hidden
>> >> >> >> > > > > > > Sent: February 23, 2009 3:52 AM
>> >> >> >> > > > > > > To: Alexandre Paradis
>> >> >> >> > > > > > > Cc: address@hidden
>> >> >> >> > > > > > > Subject: Re: [Ltib] Building xorg-server; missing 
>> >> >> >> > > > > > > dependencies?
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > Hi Alex,
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > That's the wrong way to add packages.  Run:
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > $ ./ltib -m config
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > Select:
>> >> >> >> > > > > > >
>> >> >> >> > > > > > >     X11  --->
>> >> >> >> > > > > > >     Install X11 (X.Org 7.3)  --->
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > And all the packages needed will be turned on.  You 
>> >> >> >> > > > > > > probably want
>> >> >> >> > > > > > > to also select some kind of window manager 
>> >> >> >> > > > > > > (enlightenment maybe).
>> >> >> >> > > > > > > Once done, save an exit then run:
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > $ ./ltib
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > NOTE: ./ltib -p <pkg> is normally only used if you're 
>> >> >> >> > > > > > > developing a
>> >> >> >> > > > > > > single package.  See the FAQ.
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > Regards, Stuart
>> >> >> >> > > > > > >
>> >> >> >> > > > > > > On Fri, 2009-02-20 at 15:45 -0500, Alexandre Paradis 
>> >> >> >> > > > > > > wrote:
>> >> >> >> > > > > > > > Hi,
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > I need to build the xorg-server package, but I seem 
>> >> >> >> > > > > > > > to be
>> >> >> >> > > > > > > > missing some needed packages.
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > I'm currently using LTIB from a Freescale BSP for the 
>> >> >> >> > > > > > > > MPC5121:
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > >         address@hidden
>> >> >> >> > > > > > > > ~/ltib/ltib-mpc5121ads-20081208/config/userspace $ cat
>> >> >> >> > > > > > > > ../../RELEASE_INFO
>> >> >> >> > > > > > > >         Release date = Fri Feb 20 20:20:58 2009 UTC
>> >> >> >> > > > > > > >         Release user = alex
>> >> >> >> > > > > > > >         Release host = dev-station
>> >> >> >> > > > > > > >         Release dir  = 
>> >> >> >> > > > > > > > /home/alex/ltib/ltib-mpc5121ads-20081208
>> >> >> >> > > > > > > >         CVS wtag     = none
>> >> >> >> > > > > > > >         CVS tag      = none
>> >> >> >> > > > > > > >         Release tag  = none
>> >> >> >> > > > > > > >         App version  = 8.1.2
>> >> >> >> > > > > > > >         CVS version  = 1.421.4.1
>> >> >> >> > > > > > > >         git version  = none
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > I successfully added the some dependent packages 
>> >> >> >> > > > > > > > using the
>> >> >> >> > > > > > > > following
>> >> >> >> > > > > > > > commands:
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > >         ./ltib -p pixman.spec
>> >> >> >> > > > > > > >         ./ltib -p randrproto.spec
>> >> >> >> > > > > > > >         ./ltib -p renderproto.spec
>> >> >> >> > > > > > > >         ./ltib -p fixesproto.spec
>> >> >> >> > > > > > > >         ./ltib -p damageproto.spec
>> >> >> >> > > > > > > >         ./ltib -p xcmiscproto.spec
>> >> >> >> > > > > > > >         ./ltib -p extproto.spec
>> >> >> >> > > > > > > >         ./ltib -p xproto.spec
>> >> >> >> > > > > > > >         ./ltib -p xtrans.spec
>> >> >> >> > > > > > > >         ./ltib -p scrnsaverproto.spec
>> >> >> >> > > > > > > >         ./ltib -p bigreqsproto.spec
>> >> >> >> > > > > > > >         ./ltib -p resourceproto.spec
>> >> >> >> > > > > > > >         ./ltib -p fontsproto.spec
>> >> >> >> > > > > > > >         ./ltib -p inputproto.spec
>> >> >> >> > > > > > > >         ./ltib -p kbproto.spec
>> >> >> >> > > > > > > >         ./ltib -p videoproto.spec
>> >> >> >> > > > > > > >         ./ltib -p compositeproto.spec
>> >> >> >> > > > > > > >         ./ltib -p recordproto.spec
>> >> >> >> > > > > > > >         ./ltib -p resourceproto.spec
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > However.. I'm still missing a couple of packages 
>> >> >> >> > > > > > > > which I can't
>> >> >> >> > > > > > > > seem to find on the GPP, mainly 'xkbfile', 'xfont', 
>> >> >> >> > > > > > > > 'xau' and 'fontenc'.
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > Where can I find these? Do I need to get them from a 
>> >> >> >> > > > > > > > source
>> >> >> >> > > > > > > > tarball, and create my own package along with a .spec 
>> >> >> >> > > > > > > > file?
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > Any help is greatly appreciated.
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > Thanks!
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > --
>> >> >> >> > > > > > > > Alexandre Paradis
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > Alexandre Paradis, Technology Architect / Architecte
>> >> >> >> > > > > > > > technologique
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > bluberi gaming technologies inc.
>> >> >> >> > > > > > > > Drummondville, Quebec  Canada
>> >> >> >> > > > > > > > 819.475.5155 (telephone) 819.475.5156 (fax) 
>> >> >> >> > > > > > > > bluberi.com
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > ----------------------------------------------------------------
>> >> >> >> > > > > > > > --
>> >> >> >> > > > > > > > -------- This e-mail and any attachments transmitted 
>> >> >> >> > > > > > > > with it are
>> >> >> >> > > > > > > > personal, privileged and confidential and solely for 
>> >> >> >> > > > > > > > the use of the individual to whom they are addressed 
>> >> >> >> > > > > > > > and intended. If you have received this e-mail in 
>> >> >> >> > > > > > > > error, please notify the sender by return e-mail. If 
>> >> >> >> > > > > > > > you are not the intended recipient or if you believe 
>> >> >> >> > > > > > > > that you are not, you are hereby notified that the 
>> >> >> >> > > > > > > > dissemination, distribution, plagiarism or copying of 
>> >> >> >> > > > > > > > this e-mail and attachments transmitted with it is 
>> >> >> >> > > > > > > > strictly prohibited. NOTICE: We have taken reasonable 
>> >> >> >> > > > > > > > precautions to prevent viruses from being present in 
>> >> >> >> > > > > > > > this e-mail. We do not accept responsibility for any 
>> >> >> >> > > > > > > > loss or damage arising from the use of this e-mail or 
>> >> >> >> > > > > > > > attachments.
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > Ce courriel et les pièces jointes s’y rattachant sont 
>> >> >> >> > > > > > > > de nature personnelle, privilégiée et confidentielle 
>> >> >> >> > > > > > > > et pour l’usage exclusif du destinataire à qui ils 
>> >> >> >> > > > > > > > sont adressés et destinés. Si vous avez reçu ce 
>> >> >> >> > > > > > > > courriel par erreur, veuillez s’il vous plaît le 
>> >> >> >> > > > > > > > renvoyer à l’expéditeur. Si vous n’êtes pas le bon 
>> >> >> >> > > > > > > > destinataire ou si vous croyez ne pas l’être, nous 
>> >> >> >> > > > > > > > vous informons immédiatement que la publication, 
>> >> >> >> > > > > > > > distribution, diffusion, copie ou plagiat de ce 
>> >> >> >> > > > > > > > courriel et de ses pièces jointes sont strictement 
>> >> >> >> > > > > > > > interdits. AVERTISSEMENT : Nous avons pris des 
>> >> >> >> > > > > > > > mesures raisonnables afin de prévenir toute 
>> >> >> >> > > > > > > > propagation de virus par le biais de ce courriel. 
>> >> >> >> > > > > > > > Nous n’accepterons donc aucune responsabilité pour 
>> >> >> >> > > > > > > > des dommages ou pertes provenant de l’utilisation de 
>> >> >> >> > > > > > > > ce courriel ou de ses pièces jointes.
>> >> >> >> > > > > > > > ----------------------------------------------------------------
>> >> >> >> > > > > > > > --
>> >> >> >> > > > > > > > --------
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > _______________________________________________
>> >> >> >> > > > > > > > LTIB home page: http://bitshrine.org
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > > > Ltib mailing list
>> >> >> >> > > > > > > > address@hidden
>> >> >> >> > > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
>> >> >> >> > > > > > > >
>> >> >> >> > > > > > >
>> >> >> >> > > > > >
>> >> >> >> > > > >
>> >> >> >> > > >
>> >> >> >> > >
>> >> >> >> > > _______________________________________________
>> >> >> >> > > LTIB home page: http://bitshrine.org
>> >> >> >> > >
>> >> >> >> > > Ltib mailing list
>> >> >> >> > > address@hidden
>> >> >> >> > > http://lists.nongnu.org/mailman/listinfo/ltib
>> >> >> >> >
>> >> >> >> > _______________________________________________
>> >> >> >> > LTIB home page: http://bitshrine.org
>> >> >> >> >
>> >> >> >> > Ltib mailing list
>> >> >> >> > address@hidden
>> >> >> >> > http://lists.nongnu.org/mailman/listinfo/ltib
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > LTIB home page: http://bitshrine.org
>> >> >> >
>> >> >> > Ltib mailing list
>> >> >> > address@hidden
>> >> >> > http://lists.nongnu.org/mailman/listinfo/ltib
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>>
>
>



-- 
Hamilton Vera
int Administrator (char Network[],char ComputationalSystems[]);
Seven Internet http://lib.seven.com.br
"Google is my shepherd, no want shall I know"