|
From: | Fernando Vilmar Palha |
Subject: | Re: [Ltib] FTP/TELNET on LPC3250 with linux-2.6.27.8, not working |
Date: | Wed, 17 Feb 2010 13:15:23 -0200 |
User-agent: | Mozilla/5.0 (Windows; U; Windows NT 5.1; pt-BR; rv:1.9.1.7) Gecko/20100111 Thunderbird/3.0.1 |
Hi Mike. Follow the output: IFCONFIG address@hidden /]# ifconfig eth0 Link encap:Ethernet HWaddr 00:1A:F1:00:00:00 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:30922 errors:1 dropped:0 overruns:0 frame:1 TX packets:105 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2810785 (2.6 MiB) TX bytes:118934 (116.1 KiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) PING address@hidden /]# ping 192.168.0.30 PING 192.168.0.30 (192.168.0.30): 56 data bytes 64 bytes from 192.168.0.30: seq=0 ttl=128 time=1.369 ms 64 bytes from 192.168.0.30: seq=1 ttl=128 time=0.509 ms 64 bytes from 192.168.0.30: seq=2 ttl=128 time=0.526 ms ^C --- 192.168.0.30 ping statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max = 0.509/0.801/1.369 ms Regards. -- Fernando Vilmar Palha Engenheiro de Computação Nautec Eletrônica Ltda Em 17/2/2010 12:01, Mike Goins escreveu: I'm starting the development with LPC3250 and I'm running linux-2.6.27.8 on EA LPC3250 board, but I can not do Telnet/FTP to the board. Just Telnet by serial port is possible. I'm using LTIB (http://ltib.org). Does anybody have a tip?Output of ifconfig? _______________________________________________ LTIB home page: http://ltib.org Ltib mailing list address@hidden http://lists.nongnu.org/mailman/listinfo/ltib -- Esta mensagem foi verificada pelo sistema de antivĂrus e acredita-se estar livre de perigo. |
[Prev in Thread] | Current Thread | [Next in Thread] |