-----Original Message-----
Subject: Re: [Ltib] Install problem LTIB on Ubuntu 8.04 (md5sum
mismatch)
Hi Lukasz,
Some possible causes maybe your toolchain download is incomplete and
corrupt causing this, or spoofing is not working correctly (due to
download problems).
Which platform are you building? I can't tell, but assuming it's
phy3250 you can verify your toolchain by doing this (adapt if your
platform is different):
$ grep CONFIG_TOOLCHAIN config/platform/phy3250/.config
# CONFIG_TOOLCHAIN1 is not set
# CONFIG_TOOLCHAIN_CUSTOM is not set
CONFIG_TOOLCHAIN="tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm"
CONFIG_TOOLCHAIN_PATH="/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-
3/arm-none-linux-gnueabi"
CONFIG_TOOLCHAIN_PREFIX="arm-none-linux-gnueabi-"
CONFIG_TOOLCHAIN_CFLAGS="-O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp"
$ cd /opt/ltib/pkgs
$ md5sum -c tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm.md5
tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm: OK
If that is okay, then do this:
$ export FS_DEBUG=1
$ ./ltib
This will give even more debug output showing the exact gcc invocation.
Regards, Stuart
Lukasz Gesieniec wrote:
> Hi,
>
> I made the change in file kernel-common.tmpl, and here's the effect:
>
>
> *** End of Linux kernel configuration.
> *** Execute 'make' to build the kernel or try 'make help'.
>
> + [ -f
> /home/lukaszge/ltib/config/platform/phy3250/linux-2.6.27.8-
phy3250.config.dev
>
> ]
> + diff -q ./.config
> /home/lukaszge/ltib/config/platform/phy3250/linux-2.6.27.8-
phy3250.config.dev
>
> + [ -n ]
> + [ %{kernel_series} = 2.4 ]
> + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// uImage V=1
> arm-linux-gnu-gcc: fsigned-char: No such file or directory
> arm-linux-gnu-gcc: O3: No such file or directory
> arm-linux-gnu-gcc: msoft-float: No such file or directory
> arm-linux-gnu-gcc: mfpu=vfp: No such file or directory
> make -f /home/lukaszge/ltib/rpm/BUILD/linux-2.6.27.8/Makefile
> silentoldconfig
> make -f scripts/Makefile.build obj=scripts/basic
> mkdir -p include/linux include/config
> make -f scripts/Makefile.build obj=scripts/kconfig silentoldconfig
> scripts/kconfig/conf -s arch/arm/Kconfig
> arm-linux-gnu-gcc: fsigned-char: No such file or directory
> arm-linux-gnu-gcc: O3: No such file or directory
> arm-linux-gnu-gcc: msoft-float: No such file or directory
> arm-linux-gnu-gcc: mfpu=vfp: No such file or directory
> set -e; :; mkdir -p include/linux/; (echo \#define
LINUX_VERSION_CODE
> 132635; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8)
+
> (c))';) < /home/lukaszge/ltib/rpm/BUILD/linux-2.6.27.8/Makefile >
> include/linux/version.h.tmp; if [ -r include/linux/version.h ] && cmp
-s
> include/linux/version.h include/linux/version.h.tmp; then rm -f
> include/linux/version.h.tmp; else :; mv -f include/linux/version.h.tmp
> include/linux/version.h; fi
> rm -f include/config/kernel.release
> set -e; if [ -L include/asm ]; then asmlink=`readlink include/asm |
cut -d
> '-' -f 2`; if [ "$asmlink" != "arm" ]; then echo "ERROR: the symlink
> include/asm points to asm-$asmlink but asm-arm was expected"; echo "
> set ARCH or save .config and run 'make mrproper' to fix it"; exit 1;
fi;
fi
> echo 2.6.27.8 > include/config/kernel.release
> make -f scripts/Makefile.build obj=scripts/basic
> if [ ! -L include/asm ]; then echo ' SYMLINK include/asm ->
> include/asm-arm'; if [ ! -d include/asm-arm ]; then mkdir -p
> include/asm-arm; fi; ln -fsn asm-arm include/asm; fi
> make -f scripts/Makefile.build obj=arch/arm/tools
> include/asm-arm/mach-types.h
> make[1]: `include/asm-arm/mach-types.h' is up to date.
> set -e; :; mkdir -p include/linux/; if [ `echo -n "2.6.27.8" | wc
-c `
> -gt 64 ]; then echo '"2.6.27.8" exceeds 64 characters' >&2; exit 1;
fi;
> (echo \#define UTS_RELEASE \"2.6.27.8\";) <
include/config/kernel.release
>> include/linux/utsrelease.h.tmp; if [ -r include/linux/utsrelease.h ]
&&
> cmp -s include/linux/utsrelease.h include/linux/utsrelease.h.tmp;
then rm
> -f include/linux/utsrelease.h.tmp; else :; mv -f
> include/linux/utsrelease.h.tmp include/linux/utsrelease.h; fi
> make -f scripts/Makefile.build obj=scripts
> make -f scripts/Makefile.build obj=scripts/genksyms
> make -f scripts/Makefile.build obj=scripts/mod
> gcc -Wp,-MD,scripts/mod/.empty.o.d -nostdinc -isystem
> /opt/nxp/gcc-3.4.5-glibc-2.3.6/arm-linux-gnu/bin/../lib/gcc/arm-linux-
gnu/3.4.5/include
>
> -D__KERNEL__ -Iinclude
> -I/home/lukaszge/ltib/rpm/BUILD/linux-2.6.27.8/arch/arm/include
-include
> include/linux/autoconf.h -mlittle-endian
-Iarch/arm/mach-lpc32xx/include
> -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing
> -fno-common -Werror-implicit-function-declaration -Os
> -fno-omit-frame-pointer -mapcs -mno-sched-prolog -mabi=aapcs-linux
> -mno-thumb-interwork -D__LINUX_ARM_ARCH__=5 -march=armv4t
-mtune=arm9tdmi
> -msoft-float -Uarm -fno-omit-frame-pointer -fno-optimize-sibling-calls
> -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(empty)"
> -D"KBUILD_MODNAME=KBUILD_STR(empty)" -c -o scripts/mod/.tmp_empty.o
> scripts/mod/empty.c
> arm-linux-gnu-gcc: fsigned-char: No such file or directory
> arm-linux-gnu-gcc: O3: No such file or directory
> arm-linux-gnu-gcc: msoft-float: No such file or directory
> arm-linux-gnu-gcc: mfpu=vfp: No such file or directory
> cc1: error: invalid option `abi=aapcs-linux'
> make[2]: *** [scripts/mod/empty.o] Error 1
> make[1]: *** [scripts/mod] Error 2
> make: *** [scripts] Error 2
> error: Bad exit status from /home/lukaszge/ltib/tmp/rpm-tmp.92514
(%build)
>
>
> RPM build errors:
> Bad exit status from /home/lukaszge/ltib/tmp/rpm-tmp.92514
(%build)
> Build time for kernel-2.6.27.8-lpc32xx: 42 seconds
>
> Failed building kernel-2.6.27.8-lpc32xx
>
>
> f_buildrpms() returned an error, exiting
> traceback:
> main:567
>
>
> Started: Mon Apr 12 13:41:12 2010
> Ended: Mon Apr 12 13:41:59 2010
> Elapsed: 47 seconds
>
> These packages failed to build:
> kernel-2.6.27.8-lpc32xx
>
> Build Failed
>
> I also attached the text file with full output.
>
> Regards,
> Lukasz
>
> Dnia 12-04-2010 o 13:32:19 Stuart Hughes <address@hidden> napisaÅ'(a):
>
>> Hi Lukasz,
>>
>> Sorry I forgot the path, it is:
>> dist/lfs-5.1/kernel/kernel-common.tmpl
>>
>> Regards, Stuart
>>
>> Lukasz Gesieniec wrote:
>>> Hi Stuart,
>>>
>>> I do not know what is wrong, but I had a couple of times to repeat
>>> the download process. Maybe my Internet connection is unstable, but
>>> downloading from other sources is OK.
>>>
>>> I am sorry for such a basic question, but you can give me the exact
>>> path to the file that I should edit?
>>>
>>> Regards,
>>> Lukasz
>>>
>>>
>>> Dnia Mon, 12 Apr 2010 10:00:06 +0100, Stuart Hughes napisa³(a):
>>>
>>>> Hi Lukasz,
>>>>
>>>> Why did you have to manually download files? LTIB should download
>>>> these
>>>> for you, what was the problem?
>>>>
>>>> I'm not sure what's wrong with your kernel compilation, can you
edit
>>>> make ARCH=$LINTARCH HOSTCC="$BUILDCC" $SYSCFG_KTARG
>>>> and add V=1 to line 169 so it looks like this:
>>>>
>>>> make ARCH=$LINTARCH HOSTCC="$BUILDCC" $SYSCFG_KTARG V=1
>>>>
>>>> and then re-run the build, this will give verbose build output and
help
>>>> diagnose the problem.
>>>>
>>>> Regards, Stuart
>>>>
>>>>
>>>> Lukasz Gesieniec wrote:
>>>>> Hi Stuard,
>>>>>
>>>>> Thank you for your reply. I installed LTIB, but many files I
>>>>> downloaded
>>>> manually and put in the directory /opt/ltib/pkgs.
>>>>> Now I have a problem with the compilation. Please help.
>>>>>
>>>>> Console output:
>>>>>
>>>>> *** End of Linux kernel configuration.
>>>>> *** Execute 'make' to build the kernel or try 'make help'.
>>>>>
>>>>> + [ -f
>>>> /home/lukaszge/ltib/config/platform/phy3250/linux-2.6.27.8-
phy3250.config.dev
>>>>
>>>> ]
>>>>> + diff -q ./.config
>>>> /home/lukaszge/ltib/config/platform/phy3250/linux-2.6.27.8-
phy3250.config.dev
>>>>
>>>>> + [ -n ]
>>>>> + [ %{kernel_series} = 2.4 ]
>>>>> + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// uImage
>>>>> arm-linux-gnu-gcc: fsigned-char: No such file or directory
>>>>> arm-linux-gnu-gcc: O3: No such file or directory
>>>>> arm-linux-gnu-gcc: msoft-float: No such file or directory
>>>>> arm-linux-gnu-gcc: mfpu=vfp: No such file or directory
>>>>> scripts/kconfig/conf -s arch/arm/Kconfig
>>>>> arm-linux-gnu-gcc: fsigned-char: No such file or directory
>>>>> arm-linux-gnu-gcc: O3: No such file or directory
>>>>> arm-linux-gnu-gcc: msoft-float: No such file or directory
>>>>> arm-linux-gnu-gcc: mfpu=vfp: No such file or directory
>>>>> CHK include/linux/version.h
>>>>> make[1]: `include/asm-arm/mach-types.h' is up to date.
>>>>> CHK include/linux/utsrelease.h
>>>>> CC scripts/mod/empty.o
>>>>> arm-linux-gnu-gcc: fsigned-char: No such file or directory
>>>>> arm-linux-gnu-gcc: O3: No such file or directory
>>>>> arm-linux-gnu-gcc: msoft-float: No such file or directory
>>>>> arm-linux-gnu-gcc: mfpu=vfp: No such file or directory
>>>>> cc1: error: invalid option `abi=aapcs-linux'
>>>>> make[2]: *** [scripts/mod/empty.o] Error 1
>>>>> make[1]: *** [scripts/mod] Error 2
>>>>> make: *** [scripts] Error 2
>>>>> make: INTERNAL: Exiting with 9 jobserver tokens available; should
>>>>> be 8!
>>>>> error: Bad exit status from /home/lukaszge/ltib/tmp/rpm-tmp.64493
>>>>> (%build)
>>>>>
>>>>>
>>>>> RPM build errors:
>>>>> Bad exit status from /home/lukaszge/ltib/tmp/rpm-tmp.64493
>>>>> (%build)
>>>>> Build time for kernel-2.6.27.8-lpc32xx: 46 seconds
>>>>>
>>>>> Failed building kernel-2.6.27.8-lpc32xx
>>>>>
>>>>>
>>>>> f_buildrpms() returned an error, exiting
>>>>> traceback:
>>>>> main:567
>>>>>
>>>>>
>>>>> Started: Mon Apr 12 10:14:30 2010
>>>>> Ended: Mon Apr 12 10:15:21 2010
>>>>> Elapsed: 51 seconds
>>>>>
>>>>> These packages failed to build:
>>>>> kernel-2.6.27.8-lpc32xx
>>>>>
>>>>> Build Failed
>>>>>
>>>>> Regards,
>>>>> Lukasz
>>>>>
>>>>>
>>>>> Dnia Fri, 09 Apr 2010 14:40:21 +0100, Stuart Hughes napisa?(a):
>>>>>
>>>>>> Hi Lukasz,
>>>>>>
>>>>>> rpm-fs is installed by LTIB in it's own private area /opt/..
>>>>>> this is so it can be installed on Ubuntu/Debian/Fedora etc.
>>>>>> LTIB will download and build this for you.
>>>>>>
>>>>>>
>>>>>> Did you re-try the the steps I suggested:
>>>>>> $ rm -rf /tmp/rpm-lukaszge
>>>>>> $ ./ltib
>>>>>>
>>>>>> Please try that and post the output. If you get the same problem
>>>>>> please
>>>>>> test the download. If LTIB thinks it's bad it will have moved
it to:
>>>>>>
>>>>>> /tmp/rpm-lukaszge/rpm-4.0.4.tar.gz.bad
>>>>>>
>>>>>> To check this run:
>>>>>> $ md5sum /tmp/rpm-lukaszge/rpm-4.0.4.tar.gz.bad
>>>>>>
>>>>>> If the download was good it should show:
>>>>>> b92c46d5add17d6edff235d776cc1af3
>>>>>>
>>>>>> If it is good then maybe the .md5sum was corrupt? this file
should
>>>> contain:
>>>>>> b92c46d5add17d6edff235d776cc1af3 rpm-4.0.4.tar.gz
>>>>>>
>>>>>> You can verify this by typing:
>>>>>> cat /tmp/rpm-lukaszge/rpm-4.0.4.tar.gz.md5
>>>>>>
>>>>>> Regards, Stuart
>>>>>>
>>>>>> Lukasz Gesieniec wrote:
>>>>>>> Dnia Thu, 08 Apr 2010 10:40:30 +0100, Stuart Hughes napisa?(a):
>>>>>>>
>>>>>>> Hi Stuart,
>>>>>>>
>>>>>>> I have enough free disk space and Internet connection is ok.
>>>>>>> I think that is a problem with rpm-fs, but I do not know how to
>>>>>>> fix it.
>>>>>>> Synaptic can not find package rpm-fs.
>>>>>>>
>>>>>>> Regards,
>>>>>>> Lukasz
>>>>>>>
>>>>>>>> Hi Lukasz,
>>>>>>>>
>>>>>>>> The most likely cause is an interrupted download or some other
>>>>>>>> issue
>>>>>>>> corrupting the download (no disk space?).
>>>>>>>>
>>>>>>>> The easiest thing in to do this (check disk space first and
your
>>>> network):
>>>>>>>> $ rm -rf /tmp/rpm-lukaszge
>>>>>>>> $ ./ltib
>>>>>>>>
>>>>>>>> Regards, Stuart
>>>>>>>>
>>>>>>>> Lukasz wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I have a problem with the installation LTIB, please help.
>>>>>>>>>
>>>>>>>>> The contents of the file host_config.log:
>>>>>>>>>
>>>>>>>>> Processing platform: host support
>>>>>>>>> ===================================
>>>>>>>>>
>>>>>>>>> Processing: rpm-fs
>>>>>>>>> ====================
>>>>>>>>> Build path taken because: no prebuilt rpm,
>>>>>>>>> Testing network connectivity for gpp
>>>>>>>>> OK GPP: is available
>>>>>>>>> Try rpm-4.0.4.tar.gz.md5 from the GPP
>>>>>>>>> 11:03:22 URL:http://bitshrine.org/gpp//rpm-4.0.4.tar.gz.md5
>>>>>>>>> [50/50] ->
>>>>>>>> "rpm-4.0.4.tar.gz.md5" [1]
>>>>>>>>> Try rpm-4.0.4.tar.gz from the GPP
>>>>>>>>> ERROR: md5sum mismatch, re-naming
>>>>>>>>> /tmp/rpm-lukaszge/rpm-4.0.4.tar.gz to
>>>>>>>> /tmp/rpm-lukaszge/rpm-4.0.4.tar.gz.bad, please re-try
>>>>>>>>> Can't get: rpm-4.0.4.tar.gz at ./ltib line 794.
>>>>>>>>> Died at ./ltib line 2446.
>>>>>>>>> traceback:
>>>>>>>>> main::check_rpm_setup:2446
>>>>>>>>> main::host_checks:1431
>>>>>>>>> main:543
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Started: Thu Apr 8 11:03:15 2010
>>>>>>>>> Ended: Thu Apr 8 11:03:35 2010
>>>>>>>>> Elapsed: 20 seconds
>>>>>>>>>
>>>>>>>>> These packages failed to build:
>>>>>>>>> rpm-fs
>>>>>>>>>
>>>>>>>>> Build Failed
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Lukasz Gesieniec
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> LTIB home page: http://ltib.org
>>>>>>>>>
>>>>>>>>> Ltib mailing list
>>>>>>>>> address@hidden
>>>>>>>>> http://lists.nongnu.org/mailman/listinfo/ltib
>>>>>>>>>
>>>>>
>>>
>>>
>
>
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/ltib
error2.txt