[Ltib] PHP(5.0.4) adding extension feature, compile success, installation fail, Please help.

[Kevin Li]

Dear sir or madam:

 

I am adding an extension feature( message q support) for PHP ( 5.0.4 for Phytec Lpc3250). I can build PHP, but installation for built PHP fails.

 

1.       Successfully build it. ( ./ltib –m scbuild –p php)

2.       Fail to install the new build.( ./ltib –m scinstall –p php)

 

Below are the dumped out messages.

 

It is great appreciate if you can take some time to look at it.

 

Regards.

Kevin

Dali Wireless Inc.

8640 Commerce court,

Burnaby, BC

Canada.

 

 

======================================================================================================================

 

 

Build complete.

(It is safe to ignore warnings about tempnam and tmpnam).

 

+ exit 0

Build time for php: 28 seconds

 

 

Processing: php

=================

Build path taken because: directory build, build key set,

 

rpmbuild --dbpath /home/kevin/lpc3250/ltib-kl/rootfs//var/lib/rpm --target arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu arm' --define '__strip strip' --define '_topdir /home/kevin/lpc3250/ltib-kl/rpm' --define '_prefix /usr' --define '_tmppath /home/kevin/lpc3250/ltib-kl/tmp' --define '_rpmdir /home/kevin/lpc3250/ltib-kl/rpm/RPMS'  --define '_mandir /usr/share/man' --define '_sysconfdir /etc' --define '_localstatedir /var' -bi --short-circuit  /home/kevin/lpc3250/ltib-kl/dist/lfs-5.1/php/php.spec

Building target platforms: arm

Building for target arm

Executing(%install): /bin/sh -e /home/kevin/lpc3250/ltib-kl/tmp/rpm-tmp.79396

+ umask 022

+ cd /home/kevin/lpc3250/ltib-kl/rpm/BUILD

+ cd php-5.0.4

+ rm -rf /home/kevin/lpc3250/ltib-kl/tmp/php

+ mkdir -p /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr

+ mkdir -p /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules

+ mkdir -p /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/conf

+ mkdir -p /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/htdocs

+ cp /home/kevin/lpc3250/ltib-kl/rootfs/usr/conf/httpd.conf /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/conf

+ [ ! -f ./sapi/cli/php.orig ]

+ make -j1 install prefix=/home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr

Installing PHP SAPI module:       apache2handler

/home/kevin/lpc3250/ltib-kl/rootfs/usr/bin/../build/instdso.sh SH_LIBTOOL='/home/kevin/lpc3250/ltib-kl/rootfs/usr/build/libtool' libphp5.la /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules

/home/kevin/lpc3250/ltib-kl/rootfs/usr/build/libtool --mode=install cp libphp5.la /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/

cp .libs/libphp5.so /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.so

cp .libs/libphp5.lai /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.la

libtool: install: warning: remember to run `libtool --finish /home/kevin/lpc3250/ltib-kl/rpm/BUILD/php-5.0.4/libs'

chmod 755 /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/modules/libphp5.so

[activating module `php5' in /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/conf/httpd.conf]

Installing PHP CLI binary:        /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/bin/

Installing PHP CLI man page:      /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/man/man1/

Installing PEAR environment:      /home/kevin/lpc3250/ltib-kl/tmp/php//opt/freescale/rootfs/arm//usr/lib/php/

/home/kevin/lpc3250/ltib-kl/rpm/BUILD/php-5.0.4/sapi/cli/php: 1: Syntax error: word unexpected (expecting ")")

make[1]: *** [install-pear-installer] Error 2

make: *** [install-pear] Error 2

error: Bad exit status from /home/kevin/lpc3250/ltib-kl/tmp/rpm-tmp.79396 (%install)

 

 

RPM build errors:

    Bad exit status from /home/kevin/lpc3250/ltib-kl/tmp/rpm-tmp.79396 (%install)

Build time for php: 1 seconds

 

Failed building php

 

 

f_buildrpms() returned an error, exiting

traceback:

 main:567

 

 

Started: Wed Oct 13 12:22:03 2010

Ended:   Wed Oct 13 12:23:53 2010

Elapsed: 110 seconds

 

VERSION          : 10.1.1

CVS_VERSION      : $Revision: 1.71 $ (Savannah)

PLATFORM         : phy3250

GNUTARCH         : arm

TOOLCHAIN        : tc-nxp-lnx-arm-3.4.5-1.i386.rpm

TOOLCHAIN_CFLAGS : -fsigned-char -msoft-float -O3

 

These packages failed to build:

php

 

Build Failed