Re: Ri.: Re: Ri.: Re: [Ltib] RPB Build error fotr packages related to X11

[seh]

Hi Enrico,

I'm not quite sure I understand.

Are you saying that the build is okay if you use the default kernel
configuration, but it fails if you change the kernel configuration?

Regards, Stuart


> Hi Stuart,
>
> In these days I removed the linux* directory from rpm/BUILD as you
> suggested, and the whole build restarted.
> Immediately after I downloaded ltib (after installation) I tried to
> compile a uImage only indicating the platform EA3250 and leaving all the
> default values.
> The toolchain generated an image that starts showing the linux penguin on
> the EA3250 screen but in console what appear is a "starting kernel" then a
> "kernel panic" message and all stops.
>
> Ok, It seems me obvious. I configured the kernel with the needed
> components and restarted a build. After the problem I tried to solve as
> you suggested and now after my last configuration compile starts and
> create and error. I tried several ways, but if I configure the board the
> compilation never complete. I have no difficult to download again ltib and
> reinstall, but I think I'm doing something incorrect or miss some passage
> or parameter...
>
> The ltib tar copy I'm using to startup is the file ltib-10-1-1a-sv.tar.gz
>
> Thank you for your support.
> Enrico
>
>
>
>
>> ----- Messaggio originale -----
>> Da: "Stuart Hughes‎" <address@hidden>
>> A: "Enrico Miglino‎" <address@hidden>
>> Oggetto: Re: Ri.: Re: [Ltib] RPB Build error fotr packages related to
>> X11
>> Data: Fri, 10 Dec 2010 18:21:25 +0000
>>
>>
>>Hi Enrico,
>>
>> Please keep emails on the list.
>>
>> It looks as though your kernel sources may be incomplete.  Provided
>> you've not been working on the kernel, remove rpm/BUILD/linux* and
>> re-try.
>>
>> Regards, Stuart
>>
>>
>> Enrico Miglino wrote:
>> > Hi Stuart, here follows the output of my last ./ltib build (without
>> > --continue)
>> >
>> > I also checked gcc in ltib shell mode, and it seems ok.
>> >
>> > ==========================================
>> > LTIB> gcc -v
>> > Using built-in specs.
>> > Target: arm-none-linux-gnueabi
>> > Configured with:
>> > /usr/src/redhat/BUILD/cross-mlib/source/gcc-4.1.2/configure
>> > --target=arm-none-linux-gnueabi --host=i686-host_pc-linux-gnu
>> > --prefix=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi
>> --with-sysroot=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/arm-none-linux-gnueabi/sysroot
>> --enable-threads --enable-shared --disable-libssp --disable-libgomp
>> --disable-libmudflap --enable-languages=c,c++ --enable-__cxa_atexit
>> > --disable-nls
>> > Thread model: posix
>> > gcc version 4.1.2
>> > ==========================================
>> >
>> >
>> > BUILD CONSOLE OUTPUT:
>> >
>> >
>> > Processing platform: Embedded Artists LPC3250 OEM Board with the
>> > NXP LPC32XX SoC
>> > ==================================================================================
>> > using config/platform/ea3250/.config
>> > PKG_KERNEL_WANT_CF has changed, kernel-2.6.27.8-lpc32xx needs a
>> rebuild
>> > PKG_KERNEL_LEAVESRC has changed, kernel-2.6.27.8-lpc32xx needs a
>> rebuild
>> >
>> > Processing: fake-provides
>> > ===========================
>> > Build path taken because: no prebuilt rpm, rpmbuild --dbpath
>> > /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define
>> > '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
>> > --define '__strip strip' --define '_topdir
>> > /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define
>> > '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir
>> > /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir
>> > /usr/share/man' --define '_sysconfdir /etc' --define
>> > '_localstatedir /var' -bb --clean --rmsource
>> > /home/enrico/ltib/EA3250/dist/lfs-5.1/fake-provides/fake-provides.spec
>> > Building target platforms: arm
>> > Building for target arm
>> > Executing(%prep): /bin/sh -e
>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>> > + umask 022
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD
>> > + exit 0
>> > Executing(%build): /bin/sh -e
>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>> > + umask 022
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD
>> > + exit 0
>> > Executing(%install): /bin/sh -e
>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>> > + umask 022
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD
>> > + rm -rf /tmp/fake-provides-1.0
>> > Processing files: fake-provides-1.0-5
>> > Provides: /bin/sh /bin/bash /bin/csh /bin/tcsh /usr/bin/env
>> > /usr/bin/perl /usr/local/bin/perl libgcc_s.so.1
>> > libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) /bin/gawk
>> > /usr/bin/nawk /usr/bin/awk /usr/bin/bash perl 5.8.0
>> > perl(Getopt::Long) perl(Getopt::Std) perl(constant)
>> > perl(getopts.pl) perl(strict) perl(vars) perl(Carp) perl(Cwd)
>> > perl(Data::Dumper) perl(DynaLoader) perl(Exporter)
>> > perl(File::Basename) perl(File::Compare) perl(File::Copy)
>> > perl(File::Find) perl(File::Spec) perl(File::stat) perl(IO::File)
>> > perl(POSIX) perl(Text::ParseWords) libstdc++.so.5
>> > libstdc++.so.5(CXXABI_1.2) libstdc++.so.5(GLIBCPP_3.2)
>> > libstdc++.so.5(GLIBCPP_3.2.1) /bin/rm /sbin/ldconfig
>> > /sbin/chkconfig linux-gate.so.1
>> > PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1
>> > rpmlib(CompressedFileNames) <= 3.0.4-1
>> > Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1
>> > rpmlib(CompressedFileNames) <= 3.0.4-1
>> > Wrote:
>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm
>> > Executing(%clean): /bin/sh -e
>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.31301
>> > + umask 022
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD
>> > + rm -rf /tmp/fake-provides-1.0
>> > + exit 0
>> > Executing(--clean): /bin/sh -e
>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.15363
>> > + umask 022
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD
>> > + exit 0
>> > Build time for fake-provides: 1 seconds
>> >
>> > sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
>> > --dbpath /var/lib/rpm -e --allmatches --nodeps --noscripts --define
>> > '_tmppath /tmp/ltib' fake-provides 2>/dev/null
>> > sudo /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
>> > --dbpath /var/lib/rpm --prefix / --ignorearch -ivh --force
>> > --excludedocs --noscripts --define '_tmppath /tmp/ltib'
>> > /home/enrico/ltib/EA3250/rpm/RPMS/arm/fake-provides-1.0-5.arm.rpm
>> > error: failed to stat /home/enrico/.gvfs: Permission denied
>> > Preparing...
>> > ########################################### [100%]
>> >
>> > Processing: kernel-2.6.27.8-lpc32xx
>> > =====================================
>> > Build path taken because: directory build, build key set, no
>> > prebuilt rpm, scbuild/scdeploy already unpacked package
>> >
>> > Processing: kernel-2.6.27.8-lpc32xx
>> > =====================================
>> > Build path taken because: directory build, build key set, no
>> > prebuilt rpm, rpmbuild --dbpath
>> > /home/enrico/ltib/EA3250/rootfs//var/lib/rpm --target arm --define
>> > '_unpackaged_files_terminate_build 0' --define '_target_cpu arm'
>> > --define '__strip strip' --define '_topdir
>> > /home/enrico/ltib/EA3250/rpm' --define '_prefix /usr' --define
>> > '_tmppath /home/enrico/ltib/EA3250/tmp' --define '_rpmdir
>> > /home/enrico/ltib/EA3250/rpm/RPMS'  --define '_mandir
>> > /usr/share/man' --define '_sysconfdir /etc' --define
>> > '_localstatedir /var' -bc --short-circuit
>> > /home/enrico/ltib/EA3250/tmp/kernel-2.6.27.8-lpc32xx.spec
>> > Building target platforms: arm
>> > Building for target arm
>> > Executing(%build): /bin/sh -e
>> /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652
>> > + umask 022
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD
>> > + cd linux-2.6.27.8
>> > + eval echo
>> > + echo
>> > + PKG_KERNEL_PATH_PRECONFIG=
>> > + eval echo
>> > + echo
>> > + PKG_KERNEL_KBUILD_PRECONFIG=
>> > + eval echo linux-2.6.27.8-ea3250.config
>> > + echo linux-2.6.27.8-ea3250.config
>> > + PKG_KERNEL_PRECONFIG=linux-2.6.27.8-ea3250.config
>> > + KSRC_DIR=/home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>> > + : arm
>> > + : ccache /usr/bin/gcc -B/usr/bin//
>> > + : linux-2.6.27.8-ea3250.config
>> > + : /home/enrico/ltib/EA3250/config/platform/ea3250
>> > + : /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>> > + rm -f /home/enrico/ltib/EA3250/rpm/BUILD/linux
>> > + ln -s /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>> > /home/enrico/ltib/EA3250/rpm/BUILD/linux
>> > + cd /home/enrico/ltib/EA3250/rpm/BUILD/linux-2.6.27.8
>> > + KBOUT=
>> > + [ -n  -a  != . ]
>> > + KBOUT=.
>> > + KTARG=zImage
>> > + SYSCFG_KTARG=uImage
>> > + [ linux-2.6.27.8-ea3250.config = defconfig ]
>> > + [ -f
>> > /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config.dev
>> > ]
>> > + [ -f
>> > /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>> > ]
>> > +
>> > CFG_PATH=/home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>> > + break
>> > + [ -z
>> > /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>> > ]
>> > + [ arm = ppc -a -f arch/powerpc/Kconfig ]
>> > + [ -n  ]
>> > + [ -n
>> > /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>> > ]
>> > + cp -f
>> > /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>> > ./.config
>> > + [ -z  -a -n  -o -n  ]
>> > + [ -n
>> > /home/enrico/ltib/EA3250/config/platform/ea3250/linux-2.6.27.8-ea3250.config
>> > ]
>> > + make ARCH=arm HOSTCC=ccache /usr/bin/gcc -B/usr/bin// oldconfig
>> > + yes make: *** No rule to make target `oldconfig'.  Stop.
>> > error: Bad exit status from
>> > /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652 (%build)
>> >
>> >
>> > RPM build errors:
>> >     Bad exit status from /home/enrico/ltib/EA3250/tmp/rpm-tmp.24652
>> (%build)
>> > Build time for kernel-2.6.27.8-lpc32xx: 0 seconds
>> >
>> > Failed building kernel-2.6.27.8-lpc32xx
>> >
>> >
>> > f_buildrpms() returned an error, exiting
>> > traceback:
>> >  main:561
>> >
>> >
>> > Started: Fri Dec 10 15:07:17 2010
>> > Ended:   Fri Dec 10 15:07:36 2010
>> > Elapsed: 19 seconds
>> >
>> > These packages failed to build:
>> > kernel-2.6.27.8-lpc32xx Build Failed
>> >
>> > Exiting on error or interrupt
>> > address@hidden:~/ltib/EA3250$
>> >> ----- Messaggio originale ----- Da: "Stuart Hughes‎" <address@hidden>
>> >> A: "Enrico Miglino‎" <address@hidden>
>> >> cc: address@hidden
>> >> Oggetto: Re: [Ltib] RPB Build error fotr packages related to X11
>> >> Data: Fri, 10 Dec 2010 12:47:01 +0000
>> >>
>> >>
>> >> Hi Enrico,
>> >>
>> >> If base_libs fails then any dependent fail.
>> >>
>> >> Despite advice from others, unless you're running an autobuilder,
>> don't
>> >> use --continue.
>> >>
>> >> Please past the output of the base_libs failure.
>> >>
>> >> Also, check that the toolchain you're using is actually installed:
>> >> $ ./ltib -m shell
>> >> LTIB> gcc -v
>> >>
>> >> Regards, Stuart
>> >>
>> >> Enrico Miglino wrote:
>> >>> Hi,
>> >>>
>> >>> after a compete build for EA3250 platform I tried to add in
>> >>> configuration (with ./ltib -m config) X11 server and the
>> >>> essential X11  modules, obating as a result that the build
>> >>> process hangs with messages  like this (tried to change some
>> >>> configuration parameters but the  problemis even the same):
>> >>>
>> >>> START
>> >>> ===================================================================sudo
>> >>> /opt/ltib/usr/bin/rpm --root /home/enrico/ltib/EA3250/rootfs
>> >>> --dbpath  /var/lib/rpm --prefix / --ignorearch -ivh --force
>> >>> --excludedocs  --noscripts --define '_tmppath /tmp/ltib'
>> >>> /home/enrico/ltib/EA3250/rpm/RPMS/arm/modeps-1.0-1.arm.rpm
>> >>> error: failed to stat /home/enrico/.gvfs: Permission denied
>> >>> Preparing...
>> >>> ########################################### [100%]
>> >>> 1:modeps                 ###########################################
>> [100%]
>> >>>
>> >>>
>> >>> f_buildrpms() returned an error, exiting
>> >>> traceback:
>> >>> main:561
>> >>>
>> >>>
>> >>> Started: Wed Dec  8 23:00:47 2010
>> >>> Ended:   Wed Dec  8 23:10:20 2010
>> >>> Elapsed: 573 seconds
>> >>>
>> >>> These packages failed to build:
>> >>> base_libs libXt libXmu
>> >>> ==================================================================
>> >>> END
>> >>>
>> >>> Note that I'm workin on ubuntu 10.04 32 bit and I already set
>> >>> /opt with a 777 permissions.
>> >>>
>> >>> Thanks. Enrico
>> >>>
>> >>> --------------------------------------------------------------
>> >>> Ovi Mail: Making email access easy
>> >>> http://mail.ovi.com
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> LTIB home page: http://ltib.org
>> >>>
>> >>> Ltib mailing list
>> >>> address@hidden
>> >>> http://lists.nongnu.org/mailman/listinfo/ltib
>> >>>
>> >
>> > --------------------------------------------------------------
>> > Ovi Mail: Making email access easy
>> > http://mail.ovi.com
>> >
>> >
>>
>
> --------------------------------------------------------------
> Ovi Mail: Making email access easy
> http://mail.ovi.com
>
>