Re: [Ltib] Fedora 11 building issue: Enlightenment for Phycore LPC3250 (repost with corrected subject line)

[Matt Edinger]

> On 05/09/2011 03:45 PM, Matt Edinger wrote:
> > Hello,
> > I get the following errors when trying to build enlightenment for
> the
> > Phycore LPC3250 board:
> >
> > if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../src/bin
> > -I../../src/lib -DUSE_E_CONFIG_H  -D_REENTRANT
> > -I/home/matt/lpc3250/ltib-new/rootfs/usr/include
> > -I/home/matt/lpc3250/ltib-new/rootfs/usr/include/directfb
> > -I/home/matt/lpc3250/ltib-new/rootfs/usr/include/efreet
> > -I/home/matt/lpc3250/ltib-new/rootfs/usr/include -I/usr/include
> > -DLOWRES_PDA=1 -DMEDIUMRES_PDA=2 -DHIRES_PDA=3 -DSLOW_PC=4
> -DMEDIUM_PC=5
> > -DFAST_PC=6 -DE17_PROFILE=SLOW_PC -DPACKAGE_BIN_DIR=\"/usr/bin\"
> > -DPACKAGE_LIB_DIR=\"/usr/lib\" -DPACKAGE_DATA_DIR=
> > \"/usr/share/enlightenment\" -DLOCALE_DIR=\"/usr/share/locale\"
> > -DPACKAGE_SYSCONF_DIR=\"/usr/etc\"    -g -O2 -MT e_slidesel.o -MD
> -MP
> > -MF ".deps/e_slidesel.Tpo" -c -o e_slidesel.o e_slidesel.c; \
> >       then mv -f ".deps/e_slidesel.Tpo" ".deps/e_slidesel.Po"; else
> rm -f
> > ".deps/e_slidesel.Tpo"; exit 1; fi
> > e_sha1.c: In function 'e_sha1_sum':
> > e_sha1.c:97: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:97: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:99: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:99: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:98: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:98: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:101: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:101: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:100: error: invalid 'asm': invalid operand for code 'w'
> > e_sha1.c:100: error: invalid 'asm': invalid operand for code 'w'
> > make[3]: *** [e_sha1.o] Error 1
> > make[3]: *** Waiting for unfinished jobs....
> > e_slider.c: In function '_e_smart_value_limit':
> > /usr/include/bits/mathinline.h:548: error: impossible constraint in
> > 'asm'
> > /usr/include/bits/mathinline.h:530: error: impossible constraint in
> > 'asm'
> > /usr/include/bits/mathinline.h:548: error: impossible constraint in
> > 'asm'
> > /usr/include/bits/mathinline.h:530: error: impossible constraint in
> > 'asm'
> > make[3]: *** [e_slider.o] Error 1
> > make[3]: Leaving directory
> >
>
`/home/matt/lpc3250/ltib-new/rpm/BUILD/enlightenment-0.16.999.050/src/bin'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory
> >
> `/home/matt/lpc3250/ltib-new/rpm/BUILD/enlightenment-0.16.999.050/src'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory
> > `/home/matt/lpc3250/ltib-new/rpm/BUILD/enlightenment-0.16.999.050'
> > make: *** [all] Error 2
> > error: Bad exit status
> > from /home/matt/lpc3250/ltib-new/tmp/rpm-tmp.51932 (%build)
> >
> >
> > RPM build errors:
> >      Bad exit status
> from /home/matt/lpc3250/ltib-new/tmp/rpm-tmp.51932
> > (%build)
> > Build time for enlightenment: 9 seconds
> >
> > Failed building enlightenment
> >
> >
> > f_buildrpms() returned an error, exiting
> > traceback:
> >   main:567
> >
> >
> > Started: Mon May  9 15:35:13 2011
> > Ended:   Mon May  9 15:36:02 2011
> > Elapsed: 49 seconds
> >
> > VERSION          : 10.1.1
> > CVS_VERSION      : $Revision: 1.74 $ (Savannah)
> > PLATFORM         : phy3250
> > GNUTARCH         : arm
> > TOOLCHAIN        : tc-fsl-x86lnx-armeabi-nptl-4.1.2-3.i386.rpm
> > TOOLCHAIN_CFLAGS : -O2 -fsigned-char -mfloat-abi=softfp -mfpu=vfp
> >
> > These packages failed to build:
> > enlightenment
> >
> > Build Failed
> >
> > Exiting on error or interrupt
> >
> >
> >
> > Any clues as to what I'm doing wrong?  If I de-select Enlightenment,
> the
> > build finishes successfully.
> 
> It looks like your cross compiler isn't setup correctly - as if
> you're 
> using the host compiler to build the package.
> I've never tried to build enlightment so I can't suggest how to fix 
> that, but can you build the rest of a working system (i.e. kernel, 
> bootloader, etc)?
> >
> >
> 
> 
> -- 
> Peter Barada
> address@hidden


Yes - if I don't include the Enlightenment package in the build, the
build completes successfully and I'm able to boot the target system and
run a test program (ts_calibrate, ts_test) that exercises the display
and touchscreen. 

--
Matt Edinger
address@hidden