Re: [Ltib] mm-codec package install question

[Stuart Hughes]

Hi Sato,

This is an issue with Freescale not pushing out their content to the public GPP.

You will need to contact them about this BSP and ask them where you can get the content.  Probably the most likely way is to download the ISO image (which I guess you have) and look for it on there under the pkgs directory on the image.

Regards, Stuart

On 21/05/11 21:30, Sato Haku-B36453 wrote:

HI,

 

I was setting up fsl-mm-codeclib and Gstreamer.  At the end of ltib compile sequence, I encountered a problem. 

 

I sent

~$./ltib –c

 

And set up packages and selected the appropriate selections according to the Multi Media Framework reference manual. 

 

At the end of compile, I go the following message.

++begin excerpt

Processing: fsl-mm-codeclib

=====================

Processing: fls-mm-ms-codeclib

=====================

Build path taken because: no built rpm,

Testing network connectivity

OK PPP:

 

Try fsl-mm-ms-codeclib-1.9.6.tar.gz.md5 from the PPP

http://auslxsc01.mtwk.freescale.net/ppp/fsl-mm-ms-codeclib-1.9.6.tar.gz.md5:

ERROR 404:  Not Found.

Try fsl-mm-ms-codeclib-1.9.6.tar.gz from the PPP

ERROR404:  notfound

Can’t get: fsl-mm-ms-codeclib-1.9.6.tar.gz at ./ltib line 790

 

f_buildrpms() returned an error, exiting

traceback:

main:560

 

++end of error excerpt

 

It seems that LTIB could not find the file at /PPP site.  So I went there and found a version 2.0.0

 

Here are my questions…

1.        Could I use 2.0.0 in place of 1.9.6? 

2.       If so, how would I get ltib to recognize it? 

3.       Is there alternalte way to get this installed? 

 

I am trying to get this resolved but had not had any success, your help is appreciated. 

 

Thanks

 

 

 

_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/ltib