Re: [Ltib] Gutenprint 5.2.8 with LTIB

[Andy Yew]

Dear Mike,

It WORKS!

I simply copy&paste the spec file you've simply made to replace my previous gutenprint.spec and scbuild it, it ended up with the beautifully build success time: 236 seconds! This has been a long awaiting result and it finally appear....

I've scinstall and scdeploy and the corresponding binary/libraries/modules "properly" appears in the folders they shud show up, such as rootfs/usr/bin, rootfs/usr/include etc.

A big thanks for your help and could you email me your paypal email address so that i could pay you a lunch or some beers?? Last request from me for this topic...

Andy

On Thu, Jan 26, 2012 at 12:40 AM, Mike Goins <address@hidden> wrote:

On Wed, Jan 25, 2012 at 8:57 AM, Andy Yew <address@hidden> wrote:
> Dear Mike,
>
> Thanks for the simple (beginner forgiving) explanation and also the
> ijsgutenprint example.
>
> As this makefile (ijsgutenprint) looks similar to some spec file language, i
> also think the spec file method you've suggested might work. Due to lack of
> experience, i'd like to ask for another help from you: Could you "roughly"
> write a "possible" spec file content for my case here (Gutenprint and
> extract-strings)?? For build, configure/compile, & install parts....
>
> After this draft is got, i'll test it out here....

I took the spec file and modified (more like hacked) it to get a host
extract-strings.  You may need work with it some more for the flags
you want.

Builds host version (as static so I don't have to manipulate libs).
Copies extract-strings to a hostbin folder and replaces it with a
wrapper script.
Cleans
Runs configure again for the build.
Removes the extract-strings dependency for generating the header file.
Builds.

It's not very robust (and certainly not upstream worthy), but does get
through that one stage.  Warning, when the cross build runs, it blows
away the wrapper script, but just right after that script is run.  Any
shift in the dependencies is likely to break the hack.  My build did
not complete since I am using a really old homegrown tool-chain, but I
expect like the codesourcery tools will not have the issue I did (well
after the extract-strings handling).

I did not go into the install/deploy, but I do not expect any issues
with those sections.  You can test that out.

Also, the version I found was suffixed with "-pre1", so adjust the
spec file appropriately.


> Thanks in advance!!
> Andy

Caught me in a good mood.

> On Wed, Jan 25, 2012 at 8:10 PM, Mike Goins <address@hidden>
> wrote:
>>
>> On Wed, Jan 25, 2012 at 6:50 AM, Mike Goins
>> <address@hidden> wrote:
>> > On Sun, Jan 22, 2012 at 1:05 PM, Andy Yew <address@hidden>
>> > wrote:
>> >> Hi all,
>> >>
>> >> Has anyone successfully build/LTIB Gutenprint?
>> >
>> >
>> > Gutenprint is one of those that are not cross-compile friendly (after
>> > taking a brief look at it).   It requires running a just built
>> > "extract-strings" on the host, but it does not appear differentiate
>> > between "build" and "host".  There are a couple options to get around
>> > this.
>>
>> Here is another method used to cross-compile the package:
>> http://pits.googlecode.com/svn-history/r5/trunk/ijsgutenprint/Makefile
>>
>> It builds libijs and extract-strings outside the source tree.  A
>> wrapper script file called extract-strings in created in the expected
>> location that references the host binary (which satisfies the rule to
>> build it).
>>
>> It is very possible to do this entirely within the spec file.
>>
>> <snipped for brevity since replying to own message, apologies>
>>
>> _______________________________________________
>> LTIB home page: http://ltib.org
>>
>> Ltib mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/ltib
>
>

_______________________________________________
LTIB home page: http://ltib.org

Ltib mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/ltib