[Ltib] using ./ltib -m release

[Sergey Ablalimov]

I try to execute the command "tib-mpc83xx-ym160$ ./ltib -m release" for 
our custom board. And I get the output below.
File tc-fsl-x86lnx-e300c3-4.1.78-1.i386.rpm is in /opt/freescale/pkgs/
ltib can't find md5 summ for it. When I create this file it is removed 
by ltib.
What i must to do?



commonsrv:~/ltib-mpc83xx/ltib-mpc83xx-ym160$ ./ltib -m  release 

You are about to create an iso image from this working project.
This will include all sources and built rpms for the target platform,
as well as the LTIB source code.



Before doing this, you should have done the following:

 1. Make sure you have committed any changes
 2. Make sure your source code is up to date
 3. Configured ltib for the target
 4. Run ltib to build all the selected packages

Do you want to continue: Y|n ?
Y
Please enter the tag name for this release
Giving the name 'HEAD' will use the head of the trunk, or current branch.

gathering a list of existing remote tags, pls wait:

Checking for unsaved config changes:
Checking that the source tree is up to date:



Checking licensing and external availabity of sources
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The following constraints/checks are enforced:

1/ All source/patches in the default configuration must be distributable.

2/ Any sources/patches not in the default configuration that are not
distributable are not be copied to the ISO image.

3/ Any content copied to the ISO image has it's md5 checksum verified by
downloading a fresh copy of the md5sum file and using it to verify the
content it checksums.

4/ Files already present on local disk in the LPP will be used.  Any
missing files will be downloaded from either the GPP staging area
or the CPP (Clickthru) staging area.

                  ------------------------


Copying content from default configuration (mandatory)
---------------------------------------------------------

checking: toolchain
====================
Testing network connectivity
OK GPP_STAGE:

OK GPP_STAGE: tc-fsl-x86lnx-e300c3-4.1.78-1.i386.rpm
WARN: skipping md5sum check for 
/opt/freescale/pkgs/tc-fsl-x86lnx-e300c3-4.1.78-1.i386.rpm, md5 file was 
not found
cp: cannot stat 
`/opt/freescale/pkgs/tc-fsl-x86lnx-e300c3-4.1.78-1.i386.rpm.md5': No 
such file or directory
Died at /home/common/ltib-mpc83xx/ltib-mpc83xx-ym160/bin/Ltibrelease.pm 
line 57.
traceback:
 main::release_copy:57
  main::release_copy_content:156
   main::release_main:337
    main::f_release:1234
     main:560

Exiting on error or interrupt
Please see | tee RELEASE_COPY_CONTENT for details