[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[lwip-devel] RE: [bug #22120] Problem in icmp_dest_unreach
From: |
Bill Auerbach |
Subject: |
[lwip-devel] RE: [bug #22120] Problem in icmp_dest_unreach |
Date: |
Fri, 25 Jan 2008 13:25:48 -0500 |
> Follow-up Comment #1, bug #22120 (project lwip):
>
> I'm not sure your problem is on lwIP. I did this test on September CVS
> HEAD
> and on 1.3.0-RC1 without any problems with Wireshark 0.99.7 :
>
> I send with iperf udp packets to my lwIP target on a unbinded port, lwIP
> reply with a ICMP "Destination unreachable", and in my wiresshark capture,
> I
> don't see any checksums errors on :
>
> - IP header checksum [correct]
> - ICMP checksum [correct]
> - on IP and UDP payload (wireshark doesn't mark them as "incorrect")
>
> I will suppose you know that old wireshark releases (0.99.5 by example)
> was
> bugged on UDP checksums (mainly on fragmented datagrams from memory), and
> that
> your pc network interface doesn't perform any checksum offload processing
> (with give some checksums errors, but last wireskark releases mark them
> like a
> warning).
The only error is in the UDP length.
> Can you tell me what is your wireshark release, and perhaps attach the
> capture file?
0.99.6a - the packet in question is attached. I changed the length to 8
from the hint in WireShark.
Bill
icmp_type_3.pcap
Description: Binary data