[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[RE:] Re: [lwip-users] How to test IP over PPP ?
From: |
Kishore |
Subject: |
[RE:] Re: [lwip-users] How to test IP over PPP ? |
Date: |
Tue, 2 Dec 2003 13:44:03 +0100 |
Hi all,
It seems, i made some progress!
Im using ARM7TDMI, in little endian mode.No idea how it would work for big
endian.
I just changed sio_read in sio.c
u32_t sio_read(void * dev, u8_t * buf, u32_t size)
{
char str1[]="CLIENT";
char str2[] = "CLIENTSERVER";
LWIP_DEBUGF( 1,("sio_read: Read\n") );
int vLen = gpUart0->read((char *)&buf[0],size);
if(vLen > 0)
if (strcmp((char *)buf,(char *)&str1))
sio_write(dev,(u8_t *)&str2,12);
return vLen;
}
and now win2k ppp direct connection could establish a connection,but anyway
fails while registering the new remote computer (my embedded system) with error
code 732.
Error 732: The PPP negotiation is not converging.
The negotiation of PPP parameters did not succeed because the local and remote
computers could not agree on a common set of parameters.
My Opt.h define
/* ---------- PPP options ---------- */
#ifndef PPP_SUPPORT
#define PPP_SUPPORT 1 /* Set for PPP */
#endif
#if PPP_SUPPORT
#define NUM_PPP 1 /* Max PPP sessions. */
#ifndef PAP_SUPPORT
#define PAP_SUPPORT 0 /* Set for PAP. */
#endif
#ifndef CHAP_SUPPORT
#define CHAP_SUPPORT 0 /* Set for CHAP. */
Log from my embedded system:
: timeout resending Config-Request state=33800728
lcp_apppInProc[33800060]: got 0 bytes
droc[33800060]: got 0 bylcp_addci: L opt=33801116 5
lcp_addci: opt=33801236
lcp_addci: opt=33801236
pppWrite[33799040]: len=0
fsm_sdata(fsm_sdata(%s): Sent code %d,%d,%d.
): Sent code 33800728,1,5.
%s: sending Configure-Request, id %d
: sending Configure-Request, id 33800728
pppInProc[33800060]: got 0 bytes
pppInput[33799948]: (null) len=33800728
fsm_input(fsm_input(%s):%d,%d,%d
):33800728,1,5
fsm_rconfreq(fsm_rconfreq(%s): Rcvd id %d state=%d
): Rcvd id 33800728 state=11
lcp_reqci: rcvdlcp_reqci: rcvd%s
lcp_reqci: returning CONFlcp_reqci: returning CONF%s.
.
pppWrite[33799040]: len=0
fsm_sdata(fsm_sdata(%s): Sent code %d,%d,%d.
): Sent code 33800728,2,5.
pppInput[33799948]: (null) len=33800728
fsm_input(fsm_input(%s):%d,%d,%d
):33800728,2,5
fsm_rconfack(fsm_rconfack(%s): Rcvd id %d state=%d
): Rcvd id 33800728 state=5
lcp_acki: Ack
ppp_send_config[33799064]: outACCM=0 0 5 2062468
ppp_recv_config[33799152]: inACCM=0 0 5 2062468
: timeout resending Config-R
equest state=33803468
pppWrite[33799040]: len=0
fsm_sdata(fsm_sdata(%s): Sent code %d,%d,%d.
): Sent code 33803468,1,5.
%s: sending Configure-Request, id %d
: sending Configure-Request, id 33803468
pppInProc[33800060]: got 0 bytes
pppInProc[33800060]: got 0 bytes
pppInProc[33800140]: Dropping bad fcs 0x0000 proto=0x6C6F
pppDrop: pbuf len=33800036
pppInput[33799948]: (null) len=33800728
fsm_input(fsm_input(%s):%d,%d,%d
):33800728,1,5
fsm_rconfreq(fsm_rconfreq(%s): Rcvd id %d state=%d
): Rcvd id 33800728 state=0
link_down: 33803000
%s: lowerdown state %d -> %d
: lowerdown state 33803468 -> 6
%s: close reason=%s state %d -> %d
: close reason=IPCP state 33803016 -> 5
pppMainWakeup: unit 33799376
ppp_send_config[33799064]: outACCM=0 FF 5 2062480
ppp_recv_config[33799152]: inACCM=0 0 5 2062480
auth_reset: 33803324
lcp_addci: L opt=33801116 2
lcp_addci: L opt=33801116 5
lcp_addci: opt=33801236
lcp_addci: opt=33801236
pppWrite[33799040]: len=0
fsm_sdata(fsm_sdata(%s): Sent code %d,%d,%d.
): Sent code 33800728,1,5.
%s: sending Configure-Request, id %d
: sending Configure-Request, id 338007pppInProc[33800060]: got 0 bytes
28
lcp_reqci: rcvdlcp_reqci: rcvd%s
lcp_reqci: lcp_reqci: %s
lcp_reqci: returning CONFlcp_reqci: returning CONF%s.
.
pppWrite[33799040]: len=0
fsm_sdata(fsm_sdata(%s): Sent code %d,%d,%d.
): Sent code 33800728,4,5.
pppInput[33799948]: (null) len=33800728
fsm_input(fsm_input(%s):%d,%d,%d
):33800728,2,5
fsm_rconfack(fsm_rconfack(%s): Rcvd id %d state=%d
): Rcvd id 33800728 state=6
lcp_acki: Ack
any help pls! sorry abt the long log .
Thanks for all your responses,
Kishore Kumar Sathyanadam
Software Developement
TLON GmbH
The Infranet Company
- [RE:] Re: [lwip-users] How to test IP over PPP ?,
Kishore <=