lwip-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lwip-users] ANN: New port of lwIP


From: Leon Woestenberg
Subject: Re: [lwip-users] ANN: New port of lwIP
Date: Wed, 18 Feb 2004 10:27:48 +0100

Hello John,

good news. Never heard of XMK, but it sounds like an interesting
project.

Will the port be publicly available? And if so, would it be included in
the XMK tree or in the lwIP "contrib" module?

I would like to announce this port on the Savannah news page once you
decide to release it.

Regards, Leon.

On Tue, 2004-02-17 at 18:01, John Taylor wrote:
> Announcement
> 
> I have completed the port of lwIP 0.7.1 to XMK.
> 
> XMK is an open source (BSD license) RTOS for microcontrollers.  The
> lwIP/XMK port will run on all platforms that XMK is ported to - the
> caveat being the low level LAN driver.  Currently the only LAN
> controller supported is the SMSC91C96 LAN. There is direct support (i.e.
> example projects) for the following eval boards:
>       edosk2674  - Hitachi H8S-2674 MCU @33Mhz.
>       esp-hbdb01 - Hitachi H8S-2329 MCU @20Mhz.
> 
> In addition, due to the layering of XMK operating system, the original
> lwIP/Unix/TAPDEV interface is preserved so lwIP/XMK applications can
> still be developed/tested on your Unix box before moving to actual
> target hardware.
> 
> The lwip/XMK port has not yet been officially released (probably within
> the next 2 weeks), but is available via Shift-Right's public Perforce
> server.
>  
> FYI: Adam Dunkel's uIP TCP/IP stack has also been ported to XMK.
> 
> http://sourceforge.net/projects/xmk/
> 
> 
> 
> John T. Taylor
> Shift-Right Technologies, LLC.
> 433 Comanche Trl
> Lawrenceville, GA 30044
> Tel: 678-344-3115
> Fax: 770-736-9276
> email: address@hidden
> url: www.shift-right.com
> 
> 
> 
> 
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://mail.gnu.org/mailman/listinfo/lwip-users


The information contained in this communication is confidential and is intended 
solely for the use of the individual or entity to whom it is addressed. Axon 
Digital Design Group is neither liable for the proper nor for the complete 
transmission of the information contained in this communication nor for any 
delay in its receipt. Axon Digital Design Group does not guarantee that the 
integrity of this communication has been maintained nor that the communication 
is free of viruses, interceptions or interference. If you are not the intended 
recipient of this communication, you are hereby notified that reading, 
disseminating, distributing or copying this message is strictly prohibited. In 
that case please return the communication to the sender and delete and destroy 
all copies. In carrying out its engagements, Axon Digital Design Group applies 
general terms and conditions, which contain a clause that limits its liability. 
A copy of these terms and conditions is available on request free of charge.







reply via email to

[Prev in Thread] Current Thread [Next in Thread]