lwip-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[lwip-users] problems with the RTL-LWip


From: liu kun
Subject: [lwip-users] problems with the RTL-LWip
Date: Sun, 23 May 2004 10:37:59 +0800

hi,list:
hi,all.I have installed the RTL-lwip0.4 in two machines(linux 2.4.20+RTLinux-3.2-pre2+realtak8139),and there is no problem during the installation this time.Since the document tell me that before use the driver for RTL-lwip,the ethernet card driver for linux must be down,so I didn't install the 8139 driver for linux.But now I can't use the examples to check if RTL-lwip goes well,such as the tcp_echo and udp_tcho.

The steps will be show as follows:
address@hidden RTL-lwIP-0.4]#rtlinux start
address@hidden RTL-lwIP-0.4]#./instools
address@hidden RTL-lwIP-0.4]# insmod rtl_rtl8139_drv.o

RT-Linux driver for the Ethernet Card rtl8139 being loaded Registered device /dev/rtl major number 205
address@hidden RTL-lwIP-0.4]# insmod rtl_lwip_stack.o
RTLinux TCP/IP stack inserted. linux thread id: 0xc4831ec4
System initialized.
TCP/IP initialized.
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+: RealTek RTL8139CP Fast Ethernet at 0xc4872000, 00:e0:4c:5d:c4:16, IRQ 10 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1. Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+: rtl8139_set_rx_mode(60000) done -- Rx config 0000d68b. Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+: dev_8139_open() ioaddr 0xe6001000 IRQ 10 GP Pins 00 full-duplex.
Successfully Opened
rt_rtl8139 interface added to netif list
rt_rtl8139 set as default

Anyone can tell me whether the RTL-lwip dirver have installed successfully it seems there is no wrong with the installation.but I can't find the device "/dev/rtl"(why ?).And next I used the example udp_echo/tcp_echo in two RTLinux machines-insmod udpserver.o/udpclient.o,there is no result shows the communication between them goes well. I think I have changed all the neccessary configuration,and the machines IP are 192.168.0.1 and 192.168.0.2. Can any one please help me with the problem,and how I can check my RTL-lwip's working status ?
thanks in advance
with best regards

liukun

_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn/




reply via email to

[Prev in Thread] Current Thread [Next in Thread]