[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [lwip-users] a question about porting
From: |
kathir |
Subject: |
RE: [lwip-users] a question about porting |
Date: |
Tue, 16 Nov 2004 06:49:24 +0530 |
how to get permission to
-----Original Message-----
From: address@hidden
[mailto:address@hidden Behalf Of
Johan Karel Maria Dams
Sent: Thursday, November 11, 2004 4:50 PM
To: Mailing list for lwIP users
Subject: Re: [lwip-users] a question about porting
Hi,
I don't know if this is of any help, but in my situation running uC/OS-II
on m32c microcontroller and a cs8900 in 8-bit polling mode I had to change
some macro's in etharp.c to get it working.
I had some similar problems, and this solved the problem. Not sure if it
will work for you though, but you can try.
#define ARPH_HWLEN(hdr) (((hdr)->_hwlen_protolen) >> 8)
#define ARPH_PROTOLEN(hdr) (((hdr)->_hwlen_protolen) & 0xff)
#define ARPH_HWLEN_SET(hdr, len) (hdr)->_hwlen_protolen =
htons(ARPH_PROTOLEN(hdr) | ((len)))
#define ARPH_PROTOLEN_SET(hdr, len) (hdr)->_hwlen_protolen = htons((len) |
(ARPH_HWLEN(hdr) << 8))
(This last one stays the same)
Best regards,
Johan
On Wed, 10 Nov 2004, jack W wrote:
> lwip-usershello everyone
>
>
> i am porting the lwip into ucos . but i happen a question . i use ping
command to ping the board and i watch the incoming data packet , it is
running .and data is follwing :
> from here
> |
> 0x80043180 00 00 00 00 00 00 00 00 02 01 00 00 90 31 04 80
.............1..
> 0x80043190 40 00 40 00 FF FF FF FF FF FF 00 E0 4C 03 18 72
@address@hidden
> 0x800431a0 08 00 06 04 08 00 06 04 00 01 00 E0 4C 03 18 72
............L..r
> 0x800431b0 C0 A8 00 01 00 00 00 00 00 00 C0 A8 00 03 20 20 ..............
> | end
>
> but in the function arp_arp_input() ; it watch the pointer hdr
>
> ...hdr
> ethhdr
> ....dst ff ff ff ff ff ff
> ....src 00 e0 4c 03 18 72
> hwtype 0x01000
> proto 0x0008
> _hwlen_protolen 0x0406
> shwaddr
> ..... 00 e0 40 03 18 72
> sipaddr
> ..... 0x0100a8c0
> dhwaddr
> ..... 00 00 00 00 00 00
> dipaddr
> ...... 0x20200300 <---- why happen this error ,my board ip
should be 0x0300a8c0 "192.168.0.3
>
>
>
>
> _______________________________________________
> lwip-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/lwip-users
>
_______________________________________________
lwip-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/lwip-users