[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] DM9000 in polled mode
From: |
Andreas Becker |
Subject: |
Re: [lwip-users] DM9000 in polled mode |
Date: |
Fri, 17 Dec 2004 13:54:27 +0100 |
Am Freitag, 17. Dezember 2004 13:11 schrieben Sie:
> Hi,
>
> I am trying to use the DM9000 in polled mode as opposed to the interrupt
> manner.
> It seems to ping fine for a while and then about after every 20 successful
> pings
> there seems to be an error receiving a packet(when reading the 0xf0
> register - it
> suppose to return a 1 or a 0 indicating whether a packet is ready or not.
> Instead it returns another value which the code says must reset the card.
> ). If the card is not reset, then there is no notification of a received
> packet from that
> point on.
> Any idea what might be going wrong?
What alignment are you using for the Davicom?
8 / 16 / 32 bit ?
Did you set in the IMR (0xFF) bit 0x80? That the read Pointer can do it's
auto-return?
Hope it helps,
--
Dipl.-Ing.(FH) Andreas Becker
Entwicklung
dSys e.K.
Soeflinger Str. 100
D-89077 Ulm
Tel: +49.731.151579-1
Fax: +49.731.151579-9
web: www.dsys.de