[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [lwip-users] Two ethernet port with one mac address
From: |
borkhuis |
Subject: |
Re: [lwip-users] Two ethernet port with one mac address |
Date: |
Fri, 1 Mar 2019 06:50:56 -0700 (MST) |
Looking at your setup, the switch might be blocking your transfers, as it
sees the same MAC address on 2 ports. Connecting two ports with the same MAC
address and/or the same IP address to a network is always a bad idea, as you
don't know what might be happening.
Is the PHY connected to two separate network ports, or is it a 2-port switch
connected to one network port of your processor?
Regards,
Johan
vrnud wrote
> Hi,
>
> I am new to lwip.
> basic:
> 1) I have two ethernt port.(external word interface)
> 2) Only one ip address is assigned to both the port.
> 3) RMII interface is used.(3rd port which is going to controller).
>
> Set up:
> 1) Both ports are connected to external ethernet switch.
> 2) PC is connected to ethernet switch.
>
> when only one port of DUT (device under test) is connected to ethernet
> switch; pinging from pc on individual port is working fine.
>
> Problem:
> when both the ports of DUT (device under test) is connected to ethernet
> switch; ping is not working.
>
>
>
>
> --
> Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html
>
> _______________________________________________
> lwip-users mailing list
> lwip-users@
> https://lists.nongnu.org/mailman/listinfo/lwip-users
--
Sent from: http://lwip.100.n7.nabble.com/lwip-users-f3.html