Re: [Mibble-users] Functionality of SNMPv3

[Bubul Ghoshal]

Hi Per,

  In the OID field i used the OID 1.3.6.1.2.1.1.5 for "sysName". But after the response the OID value is getting changed to  1.3.6.1.6.3.11.2.1.3 and giving wrong value. I also tried with the GETNEXT operation, but it also produces the same result and every the value is incremented by one. But from other MIB Browser i am getting a correct response.

   Can you please tell me the general steps i need to follow to get an OID value using SNMPv3.

 

Thanks,

Bubul.

Per Cederberg <address@hidden> wrote:

> Hi,
>
> Try using GetNext instead of Get and see what the agent
> returns in that case.
>
> Also, the OID specified seems wrong. OID 1.3.6.1.6.3.11.2.1.3
> corresponds to "snmpUnknownPDUHandlers" in SNMP-MPD-MIB. The
> "sysName" field in SNMPv2-MIB instead has OID 1.3.6.1.2.1.1.5.
>
> Cheers,
>
> /Per
>
> On mon, 2005-07-04 at 15:14 +0100, Bubul Ghoshal wrote:
> > Hi,
> > I just wanted to test the working of SNMPv3. So i chose Mibble MIB
> > Browser. I did the following settings
> > Host IP Address : 172.16.2.112
> > Port Number : 161
> > UserName : ss
> > Authentication : None
> > Privacy : None
> > Context Name : 
> > Context Engine :
> > When i tried to get the value for "sysName", the OID value was
> > changed to 1.3.6.1.6.3.11.2.1.3.0 and i got a value 6441 as shown in
> > the output
> > GET:
>  1.3.6.1.6.3.11.2.1.3.0: 6441
> > But when i performed the same operation for the same configuration
> > using some othe MIB Browser i got the correct result for SNMPv3. Can
> > any one sugest where am i going wrong and the ways to get values for
> > SNMPv3 compatible devices using Mibble MIB Browser.
> > 
> > Thanks and Regards,
> > Bubul.

---

 Too much spam in your inbox? Yahoo! Mail gives you the best spam protection for FREE!
http://in.mail.yahoo.com