[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Nano-devel] [PATCH 3/3] build: rename the sample config file, so it wil
From: |
Benno Schulenberg |
Subject: |
[Nano-devel] [PATCH 3/3] build: rename the sample config file, so it will be colored like a nanorc |
Date: |
Sat, 24 Dec 2016 18:01:28 +0100 |
---
AUTHORS | 2 +-
README | 2 +-
configure.ac | 2 +-
doc/.gitignore | 2 +-
doc/faq.html | 4 ++--
doc/{nanorc.sample.in => sample.nanorc.in} | 0
nano.spec.in | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
rename doc/{nanorc.sample.in => sample.nanorc.in} (100%)
diff --git a/AUTHORS b/AUTHORS
index 1fe47909..789524d4 100644
--- a/AUTHORS
+++ b/AUTHORS
@@ -39,7 +39,7 @@ Mike Frysinger <address@hidden>
* Gentoo package maintainer. Whitespace display mode,
--enable-utf8/--disable-utf8 configure options for ncurses,
many new color regexes and improvements to existing color
- regexes for nanorc.sample, and miscellaneous bug fixes.
+ regexes in syntax/*.nanorc, and miscellaneous bug fixes.
Mark Majeres <address@hidden>
* A functional undo/redo system, and coloring nano's interface.
diff --git a/README b/README
index 928de1a6..fc0ea4bf 100644
--- a/README
+++ b/README
@@ -34,7 +34,7 @@ How to compile and install nano
default installation directory of /usr/local.
If you haven't configured with the --disable-nanorc option, after
- installation you may want to copy the doc/nanorc.sample file to
+ installation you may want to copy the doc/sample.nanorc file to
your home directory, rename it to ".nanorc", and then edit it
according to your taste.
diff --git a/configure.ac b/configure.ac
index fe5517cf..8f459697 100644
--- a/configure.ac
+++ b/configure.ac
@@ -751,7 +751,7 @@ AM_CONDITIONAL(BUILDING_FROM_GIT, test x$from_git = xyes)
AC_CONFIG_FILES([
Makefile
doc/Makefile
-doc/nanorc.sample
+doc/sample.nanorc
m4/Makefile
po/Makefile.in
src/Makefile
diff --git a/doc/.gitignore b/doc/.gitignore
index da6439a8..ff72249c 100644
--- a/doc/.gitignore
+++ b/doc/.gitignore
@@ -1,7 +1,7 @@
-/nanorc.sample
nano.1.html
rnano.1.html
nanorc.5.html
texinfo.tex
nano.info
nano.html
+sample.nanorc
diff --git a/doc/faq.html b/doc/faq.html
index 3b598fb4..0fa4b71f 100644
--- a/doc/faq.html
+++ b/doc/faq.html
@@ -159,8 +159,8 @@
<h2><a name="3.8"></a>3.8. Tell me more about this verbatim input stuff!</h2>
<blockquote><p>To use verbatim input, you must be using nano 1.3.1 or newer.
When you want to insert a literal character into the file you're editing, such
as a control character that nano usually treats as a command, first press
<b>Meta-V</b> (if you're not at a prompt, you'll get the message "Verbatim
Input"), then press the key(s) that generate the character you want.</p>
<p>Alternatively, if you've enabled Unicode support (see section <a
href="#5.3">5.3</a>), you can press <b>Meta-V</b> and then type a six-digit
hexadecimal code (from 000000 to 10FFFF, case-insensitive), and the character
with the corresponding value will be inserted instead. The prompt will change
to "Unicode Input" when you do this.</p></blockquote>
-<h2><a name="3.9a"></a>3.9a. How do I make a .nanorc file that nano will read
when I start it?</h2>
-<blockquote><p>It's not hard at all! But, your version of nano must <b>not</b>
have been compiled with <b>--disable-nanorc</b>, and must be version 1.1.12 or
newer (use nano -V to check your version and compiled features). Then simply
copy the <b>nanorc.sample</b> that came with the nano source or your nano
package (most likely in /usr/doc/nano) to .nanorc in your home directory. If
you didn't get one, the syntax is simple. Flags are turned on and off by using
the words <b>set</b> and <b>unset</b> plus the long option name for the
feature. For example, "set nowrap" or "set
smarthome".</p></blockquote>
+<h2><a name="3.9a"></a>3.9a. How do I make a .nanorc file that will be read
when I start nano?</h2>
+<blockquote><p>It's not hard at all! But, your nano must <b>not</b> have been
compiled with <b>--disable-nanorc</b>. Then simply copy the
<b>sample.nanorc</b> that came with the nano source or your nano package (most
likely in /usr/doc/nano) to .nanorc in your home directory. If you didn't get
one, the syntax of the file is simple. Flags are turned on and off by using the
words <b>set</b> and <b>unset</b> plus the long option name for the feature.
For example, "set nowrap" or "set
smarthome".</p></blockquote>
<h2><a name="3.9b"></a>3.9b. How about in Win32?</h2>
<blockquote><p>If you're using the official nano .zip file and have extracted
all the files, you should take the file nano.rc and place it somewhere on your
Win32 system (for example, if you have write permission to do so, at the top of
C:\). Then you must create an Environment variable called HOME which points to
the directory where you put nano.rc. In Windows XP, you can get to Environment
variables by right-clicking "My Computer" either on the desktop or in the Start
Menu, and selecting Properties. This should bring up the System Properties
panel. Then click the Advanced Tab, and there should be a button called
Environment Variables. Click that to bring up the Environment Variables
section. Now, under User Variables you should be able to click the New button,
and make a new Variables Name called HOME, with the Variable Value of whatever
path you copied nano.rc into (just the directory name; don't add nano.rc onto
the end).</p>
<p>We're still working on documentation for enabling syntax highlighting on
Win32; please bear with us.</p>
diff --git a/doc/nanorc.sample.in b/doc/sample.nanorc.in
similarity index 100%
rename from doc/nanorc.sample.in
rename to doc/sample.nanorc.in
diff --git a/nano.spec.in b/nano.spec.in
index ccb20a5e..05a7891b 100644
--- a/nano.spec.in
+++ b/nano.spec.in
@@ -43,7 +43,7 @@ fi
%files
%defattr(-,root,root)
-%doc AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO doc/faq.html
doc/nanorc.sample
+%doc AUTHORS COPYING ChangeLog INSTALL NEWS README THANKS TODO doc/faq.html
doc/sample.nanorc
%{_bindir}/*
%{_docdir}/nano/*
%{_mandir}/man*/*
--
2.11.0