[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Octave-bug-tracker] [bug #44283] crash / hang-up during export to svg v
From: |
anonymous |
Subject: |
[Octave-bug-tracker] [bug #44283] crash / hang-up during export to svg via print |
Date: |
Tue, 17 Feb 2015 09:28:29 +0000 |
User-agent: |
Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:35.0) Gecko/20100101 Firefox/35.0 |
URL:
<http://savannah.gnu.org/bugs/?44283>
Summary: crash / hang-up during export to svg via print
Project: GNU Octave
Submitted by: None
Submitted on: Di 17 Feb 2015 09:28:28 UTC
Category: Plotting
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: Crash
Status: None
Assigned to: None
Originator Name: Niko K.
Originator Email: address@hidden
Open/Closed: Open
Discussion Lock: Any
Release: 3.8.2
Operating System: GNU/Linux
_______________________________________________________
Details:
Hello!
I've repeatedly tried to export my figures to svg files.
Every time there is a hang-up / crash when I'm using the following command
figure(1);
hold on;
grid on;
plot(TAXIS,Avref(:,2),".","color",[1 0 0],TAXIS,Avsec(:,2),"-","color",[0.8
0 0]);
# plot(TAXIS(a-8192:a),Avref(a-8192:a,2),"color",[1 0
0],TAXIS(a-8192:a),Avsec(a-8192:a,2),"color",[0.8 0 0]);
xlabel('time [s]');
ylabel('x-comp [nT]');
print("./outfiles/DIFFERENCES.svg","-F:24","-S2048,1536");
a the lengths of the vectors are 864000, of the vector(s) Avref and Avsec.
TAXIS is just a linearly increasing time axis.
During export of SVG file the file itself is generated but keeps size 0 kByte
- I've waited 15 min, no change - Octave itself hangs and can only be stopped
by pressing repeatedly CTRL+C. Happens ind GUI as well as terminal versions.
I've tried this in Octave 3.8.1 as well as Octave 3.8.2. Same results.
Then I tried to reduce the amounts of data points for debugging. with the
following commands.
figure(1);
hold on;
grid on;
# plot(TAXIS,Avref(:,2),".","color",[1 0 0],TAXIS,Avsec(:,2),"-","color",[0.8
0 0]);
plot(TAXIS(a-8192:a),Avref(a-8192:a,2),"color",[1 0
0],TAXIS(a-8192:a),Avsec(a-8192:a,2),"color",[0.8 0 0]);
xlabel('time [s]');
ylabel('x-comp [nT]');
print("./outfiles/DIFFERENCES.svg","-F:24","-S2048,1536");
With this parameters the export worked.
Worked with this parameters too:
figure(1);
hold on;
grid on;
# plot(TAXIS,Avref(:,2),".","color",[1 0 0],TAXIS,Avsec(:,2),"-","color",[0.8
0 0]);
plot(TAXIS(a-8192:a),Avref(a-8192:a,2),'.',"color",[1 0
0],TAXIS(a-8192:a),Avsec(a-8192:a,2),'-',"color",[0.8 0 0]);
xlabel('time [s]');
ylabel('x-comp [nT]');
print("./outfiles/DIFFERENCES.svg","-F:24","-S2048,1536");
If tried this many times with multiples of 2^n.
But only if the length is smaller than 8192 the output works.
8192 equals to 2^13 if I'm correct?
Is there a limitation inbound in the print command when using svg file
export?
All other operations with those vectors react as usual.
Greets
Niko
_______________________________________________________
Reply to this item at:
<http://savannah.gnu.org/bugs/?44283>
_______________________________________________
Nachricht gesendet von/durch Savannah
http://savannah.gnu.org/
- [Octave-bug-tracker] [bug #44283] crash / hang-up during export to svg via print,
anonymous <=