On Fri, Apr 26, 2019 at 3:00 PM JohnD <address@hidden> wrote:
From: Doug Stewart [mailto:address@hidden]
Sent: Friday, April 26, 2019 1:30 PM
To: JohnD
Cc: Octave Maintainers List
Subject: Re: arduino package testing
On Fri, Apr 26, 2019 at 12:51 PM JohnD <address@hidden> wrote:
Whoops – should be
arduinosetup(‘libraries’, listArduinoLibraries('core'))
the single quotes were still wrong.
arduinosetup('libraries', listArduinoLibraries('core'))
this worked.
I got
Summary:
PASS 135
FAIL 8
--
DAS
--------------------
Can you post the log for which ones failed ?
I usually only see failures when using a board other than the uno, as some of the tests verify modes set on specific pins such as the i2c and SPI
I don't seem to have a rotaryEncoder !
assert(!isempty(find(cellfun(@(x) strcmpi(x, "rotaryencoder"), ar.libraries()), 1)))
!!!!! test failed
assert (!isempty (find (cellfun (@(x) strcmpi (x, "rotaryencoder"), ar.libraries ()), 1))) failed
shared variables scalar structure containing the fields:
arduinos =
{
[1,1] =
scalar structure containing the fields:
port = /dev/ttyACM0
board = uno
}
>>>>> processing /home/doug/octave/arduino-0.4.0/@rotaryEncoder/readCount.m
***** test
ar = arduino ();
e = rotaryEncoder(ar, "d2","d3");
readCount(e);
readCount(e, "reset", 0);
readCount(e, "reset", 1);
readCount(e, "reset", true);
!!!!! test failed
sendCommand: unknown or unprogrammed libray 'rotaryencoder'.
>>>>> processing /home/doug/octave/arduino-0.4.0/@rotaryEncoder/readSpeed.m
***** test
ar = arduino ();
e = rotaryEncoder(ar, "d2","d3");
readSpeed(e);
!!!!! test failed
sendCommand: unknown or unprogrammed libray 'rotaryencoder'.
>>>>> processing /home/doug/octave/arduino-0.4.0/@rotaryEncoder/resetCount.m
***** test
ar = arduino ();
e = rotaryEncoder(ar, "d2","d3");
resetCount(e);
resetCount(e, 10);
!!!!! test failed
sendCommand: unknown or unprogrammed libray 'rotaryencoder'.
>>>>> processing /home/doug/octave/arduino-0.4.0/@rotaryEncoder/rotaryEncoder.m
***** test
assert(configurePin(ar, "d2"), "unset")
assert(configurePin(ar, "d3"), "unset")
enc = rotaryEncoder(ar, "d2", "d3");
assert (isa (enc, "rotaryEncoder"))
assert(!strcmpi(configurePin(ar, "d2"), "unset"))
assert(!strcmpi(configurePin(ar, "d3"), "unset"))
clear enc
assert(configurePin(ar, "d2"), "unset")
assert(configurePin(ar, "d3"), "unset")
!!!!! test failed
sendCommand: unknown or unprogrammed libray 'rotaryencoder'.
shared variables scalar structure containing the fields:
ar =
<object arduino>
***** test
enc = rotaryEncoder(ar, "d2", "d3", 100);
assert (isa (enc, "rotaryEncoder"))
!!!!! test failed
sendCommand: unknown or unprogrammed libray 'rotaryencoder'.
shared variables scalar structure containing the fields:
ar =
<object arduino>
***** test
enc = rotaryEncoder(ar, "d2", "d3");
fail ('rotaryEncoder(ar, "d2", "d3");', "already in use");
!!!!! test failed
sendCommand: unknown or unprogrammed libray 'rotaryencoder'.
shared variables scalar structure containing the fields:
ar =
<object arduino>
>>>>> processing /home/doug/octave/arduino-0.4.0/@rotaryEncoder/subsref.m
***** test
ar = arduino();
r = rotaryEncoder (ar, "d2", "d3", 100);
assert (isarduino(r.parent))
assert (ar.port, r.parent.port)
assert (r.ppr, 100)
assert (numel(r.pins) == 2)
fail ("r.invalid")
!!!!! test failed