RE: Re: arduino package release testing

[JohnD]

> 
> Message: 1
> Date: Tue, 21 May 2019 17:51:28 -0400
> From: Doug Stewart <address@hidden>
> To: JohnD <address@hidden>
> Cc: address@hidden
> Subject: Re: arduino package release testing
> Message-ID:
>       <address@hidden
> gmail.com>
> Content-Type: text/plain; charset="utf-8"
> 
> On Tue, May 21, 2019 at 10:01 AM JohnD <address@hidden>
> wrote:
> 
> > I did a few minor updates to the Arduino package to help with testing,
so
> > can anyone with an Arduino UNO and some spare time try installing and
> > running it.
> >
> > It required the Arduino IDE to be present, and the instrument control
> > package to be installed
> >
> > The latest release dist is at:
> >
> >
> > https://sourceforge.net/p/octave/package-
> releases/_discuss/thread/64f6371d91
> > /eb87/attachment/arduino-0.4.0.tar.gz
> > <https://sourceforge.net/p/octave/package-
> releases/_discuss/thread/64f6371d91/eb87/attachment/arduino-0.4.0.tar.gz>
> >
> >
> >
> > Once installed, load the package and run the following to start the
install
> > to the arduino uno that will be compatible with the test calls:
> >
> > > arduino_bistsetup
> >
> >
> > The Arduino IDE should display. After pressing the upload button on IDE.
> > Close it (after the upload was done), it will perform a few verification
> > tests
> >
> > Once completed, the normal bist testing can be performed using
> > __run_test_suite__
> >
> >
> > I will  try and test it.
> I have an arduino but am just a beginner.
> 


Thanks!  The testing should be relatively easy, assuming everything works
correctly.
The command to run for testing is displayed when arduino_bistsetup
completes.