[paparazzi-commits] [5929] removed arm7 makefile, is lpc21 now

[Felix Ruess]

Revision: 5929
          http://svn.sv.gnu.org/viewvc/?view=rev&root=paparazzi&revision=5929
Author:   flixr
Date:     2010-09-23 00:00:26 +0000 (Thu, 23 Sep 2010)
Log Message:
-----------
removed arm7 makefile, is lpc21 now

Removed Paths:
-------------
    paparazzi3/trunk/conf/Makefile.arm7

Deleted: paparazzi3/trunk/conf/Makefile.arm7
===================================================================
--- paparazzi3/trunk/conf/Makefile.arm7 2010-09-22 23:59:57 UTC (rev 5928)
+++ paparazzi3/trunk/conf/Makefile.arm7 2010-09-23 00:00:26 UTC (rev 5929)
@@ -1,316 +0,0 @@
-# Hey Emacs, this is a -*- makefile -*-
-#
-#   $Id$
-#   Copyright (C) 2003-2005 Pascal Brisset, Antoine Drouin
-#
-# This file is part of paparazzi.
-#
-# paparazzi is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# paparazzi is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with paparazzi; see the file COPYING.  If not, write to
-# the Free Software Foundation, 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-#
-
-
-#
-# This is the common Makefile for the arm7-target.
-#
-
-SRC_ARCH = arm7
-
-# Define programs and commands.
-HAVE_ARM_NONE_EABI_GCC := $(wildcard /usr/bin/arm-none-eabi-gcc)
-ifeq ($(strip $(HAVE_ARM_NONE_EABI_GCC)),)
-CC             = arm-elf-gcc
-LD             = $(CC)
-SHELL = sh
-OBJCOPY = arm-elf-objcopy
-OBJDUMP = arm-elf-objdump
-SIZE = arm-elf-size
-NM = arm-elf-nm
-else
-CC             = arm-none-eabi-gcc
-LD             = $(CC)
-SHELL = sh
-OBJCOPY = arm-none-eabi-objcopy
-OBJDUMP = arm-none-eabi-objdump
-SIZE = arm-none-eabi-size
-NM = arm-none-eabi-nm
-endif
-REMOVE = rm -f
-COPY = cp
-
-
-# Launch with "make Q=''" to get full command display
-Q=@
-
-# MCU name and submodel
-MCU = arm7tdmi
-THUMB    = -mthumb
-THUMB_IW = -mthumb-interwork
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-#FLASH_MODE=ISP
-
-SRCARM = $($(TARGET).srcs)
-
-ASRCARM = crt0.S
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-#OPT=3
-
-CSTANDARD = -std=gnu99
-
-CINCS = $(INCLUDES) -I $(SRC_ARCH)/include
-
-# Compiler flags.
-CFLAGS = $(CINCS)
-CFLAGS += -O$(OPT)
-# CFLAGS += -malignment-traps
-CFLAGS += -Wall -Wcast-qual -Wimplicit -Wcast-align -Winline
-CFLAGS += -Wpointer-arith -Wswitch
-CFLAGS += -Wredundant-decls -Wreturn-type -Wshadow -Wunused
-CFLAGS += -Wa,-adhlns=$(OBJDIR)/$(notdir $(subst $(suffix $<),.lst,$<))
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += -ffunction-sections -fdata-sections
-
-# flags only for C
-CFLAGS + = -Wstrict-prototypes -Wmissing-declarations
-CFLAGS += -Wmissing-prototypes -Wnested-externs
-CFLAGS += $(CSTANDARD)
-CFLAGS += $($(TARGET).CFLAGS) $(LOCAL_CFLAGS)
-
-# Assembler flags.
-ASFLAGS = -Wa,-adhlns=$(OBJDIR)/$(notdir $(<:.S=.lst))
-
-#Additional libraries.
-MATH_LIB = -lm
-
-# Linker flags.
-LDFLAGS = -n -nostartfiles -Wl,-Map=$(OBJDIR)/$(TARGET).map,--cref
-LDFLAGS += -lc
-LDFLAGS += $(NEWLIBLPC) $(MATH_LIB)
-LDFLAGS += -lc -lgcc
-LDFLAGS += $(CPLUSPLUS_LIB)
-LDFLAGS += -Wl,--gc-sections
-# -lusbstack -Larm7/lpcusb
-
-ifndef LDSCRIPT
-ifeq ($(FLASH_MODE),ISP)
-LDSCRIPT = $(SRC_ARCH)/LPC2148-ROM.ld
-else ifeq ($(FLASH_MODE),ISP)
-LDSCRIPT = $(SRC_ARCH)/LPC2148-ROM.ld
-else
-LDSCRIPT = $(SRC_ARCH)/LPC2148-ROM-bl.ld
-endif
-endif
-LDFLAGS +=-T$(LDSCRIPT)
-#endif
-
-
-
-# ---------------------------------------------------------------------------
-# Flash-Programming support using lpc21isp by Martin Maurer
-
-# Settings and variables:
-LPC21ISP = lpc21isp
-ifndef LPC21ISP_PORT
-LPC21ISP_PORT = /dev/ttyS0
-endif
-LPC21ISP_FLASHFILE = $(OBJDIR)/$(TARGET).hex
-# verbose output:
-#LPC21ISP_DEBUG = -debug
-# enter bootloader via RS232 DTR/RTS (only if hardware supports this
-# feature - see Philips AppNote):
-ifndef LPC21ISP_CONTROL
-LPC21ISP_CONTROL =
-# -control
-endif
-
-# ---------------------------------------------------------------------------
-# Flash-Programming support using lpc21iap by Martin Muller  (usb bootloader)
-
-LPC21IAP = $(PAPARAZZI_SRC)/sw/ground_segment/lpc21iap/lpc21iap
-
-# ---------------------------------------------------------------------------
-# Flash-Programming support using openocd
-OOCD = openocd
-OOCD_INTERFACE = arm-usb-ocd
-OOCD_TARGET    = csc
-
-
-# Define all object files.
-COBJ      = $(SRC:%.c=$(OBJDIR)/%.o)
-AOBJ      = $(ASRC:%.S=$(OBJDIR)/%.o)
-COBJARM   = $(SRCARM:%.c=$(OBJDIR)/%.o)
-AOBJARM   = $(ASRCARM:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(ASRCARM:.S=.lst) $(SRC:.c=.lst) $(SRCARM:.c=.lst)
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. $(CFLAGS)
-ALL_ASFLAGS = -mcpu=$(MCU) $(THUMB_IW) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: sizebefore build sizeafter
-
-build: elf hex lss sym
-
-elf: $(OBJDIR)/$(TARGET).elf
-hex: $(OBJDIR)/$(TARGET).hex
-lss: $(OBJDIR)/$(TARGET).lss
-sym: $(OBJDIR)/$(TARGET).sym
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(OBJDIR)/$(TARGET).hex
-ELFSIZE = $(SIZE) -A $(OBJDIR)/$(TARGET).elf
-sizebefore:
-       @if [ -f $(OBJDIR)/$(TARGET).elf ]; then echo; $(ELFSIZE); echo; fi
-
-sizeafter:
-       @if [ -f $(OBJDIR)/$(TARGET).elf ]; then echo; $(ELFSIZE); echo; fi
-
-
-# Program the device.
-load upload program: $(OBJDIR)/$(TARGET).hex
-ifeq ($(FLASH_MODE),IAP)
-       $(SUDO) $(LPC21IAP)  $(OBJDIR)/$(TARGET).elf
-else ifeq ($(FLASH_MODE),JTAG)
-       @echo -e "  OOCD\t$<"
-       $(Q)$(OOCD) -f interface/$(OOCD_INTERFACE).cfg \
-                -f board/$(OOCD_TARGET).cfg \
-                -c init \
-                -c "reset halt" \
-                -c "flash write_image erase $(OBJDIR)/$(TARGET).bin 
0x08000000" \
-                -c reset \
-                -c shutdown
-else
-       @echo
-       $(LPC21ISP) $(LPC21ISP_CONTROL) $(LPC21ISP_DEBUG) $(LPC21ISP_FLASHFILE) 
$(LPC21ISP_PORT) $(LPC21ISP_BAUD) $(LPC21ISP_XTAL)
-endif
-
-# Create final output files (.hex, .eep) from ELF output file.
-# TODO: handling the .eeprom-section should be redundant
-%.hex: %.elf
-       @echo OBJC $@
-       $(Q)$(OBJCOPY) -O $(FORMAT) $< $@
-
-
-# Create extended listing file from ELF output file.
-# testing: option -C
-%.lss: %.elf
-       @echo OBJD $@
-       $(Q)$(OBJDUMP) -h -S -C $< > $@
-
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
-       @echo NM $@
-       $(Q)$(NM) -n $< > $@
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(OBJDIR)/$(TARGET).elf
-.PRECIOUS : $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ)
-%.elf:  $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ)
-       @echo LD $@
-       $(Q)$(CC) $(THUMB) $(ALL_CFLAGS) $(AOBJARM) $(AOBJ) $(COBJARM) $(COBJ)  
--output $@ $(LDFLAGS) $($(TARGET).LDFLAGS)
-
-
-# Compile: create object files from C source files. ARM-only
-$(OBJDIR)/%.o : %.c $(OBJDIR)/../Makefile.ac
-       @echo CC $@
-       $(Q)test -d $(dir $@) || mkdir -p $(dir $@)
-       $(Q)$(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-$(OBJDIR)/%.o : $(SRC_ARCH)/lpcusb/%.c $(OBJDIR)/../Makefile.ac
-       @echo CC $@
-       $(Q)$(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-
-# grab files in var/$(AIRCRAFT)/$(TARGET) aka $(OBJDIR)
-#$(OBJDIR)/%.o : $(OBJDIR)/%.c
-#      @echo CC $@
-#      $(Q)$(CC) -c $(ALL_CFLAGS) $(CONLYFLAGS) $< -o $@
-
-# Assemble: create object files from assembler source files. ARM/Thumb
-$(AOBJ) : $(OBJDIR)/%.o : %.S
-       @echo AS $@
-       $(Q)$(CC) -c $(THUMB) $(ALL_ASFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files. ARM-only
-$(AOBJARM) : $(OBJDIR)/%.o : $(SRC_ARCH)/%.S
-       @echo AS $@
-       $(Q)$(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: clean_list
-
-
-clean_list :
-       @echo
-       $(REMOVE) $(OBJDIR)/$(TARGET).hex
-       $(REMOVE) $(OBJDIR)/$(TARGET).obj
-       $(REMOVE) $(OBJDIR)/$(TARGET).elf
-       $(REMOVE) $(OBJDIR)/$(TARGET).map
-       $(REMOVE) $(OBJDIR)/$(TARGET).obj
-       $(REMOVE) $(OBJDIR)/$(TARGET).a90
-       $(REMOVE) $(OBJDIR)/$(TARGET).sym
-       $(REMOVE) $(OBJDIR)/$(TARGET).lnk
-       $(REMOVE) $(OBJDIR)/$(TARGET).lss
-       $(REMOVE) $(COBJ)
-       $(REMOVE) $(AOBJ)
-       $(REMOVE) $(COBJARM)
-       $(REMOVE) $(AOBJARM)
-       $(REMOVE) $(LST)
-       $(REMOVE) $(SRC:.c=.s)
-       $(REMOVE) $(SRC:.c=.d)
-       $(REMOVE) $(SRCARM:.c=.s)
-       $(REMOVE) $(SRCARM:.c=.d)
-       $(REMOVE) .dep/*
-       $(REMOVE) *~
-
-
-# Listing of phony targets.
-.PHONY : all sizebefore sizeafter \
-build elf hex lss sym clean clean_list program
-
-
-#
-# Dependencies
-#
-
-$(OBJDIR)/.depend:
-       @echo DEPEND $@
-       @test -d $(OBJDIR) || mkdir -p $(OBJDIR)
-       $(Q)$(CC) -MM -MG $(CFLAGS) $($(TARGET).srcs) | sed 
's|\([^\.]*\.o\)|$(OBJDIR)/\1|' > $@
-
-ifneq ($(MAKECMDGOALS),clean)
-ifneq ($(MAKECMDGOALS),erase)
--include $(OBJDIR)/.depend
-endif
-endif