[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Funjet

From: martin
Subject: Re: [Paparazzi-devel] Funjet
Date: Tue, 4 Sep 2007 08:38:46 +0200 (CEST)

Hi Matt,

> Could you send a photo or explain how you mounted the brushless
outrunner to the
> FunJET if there are any special considerations?  You use the 2216/26

The Funjet comes with a plastic motor holder, the Axi is mounted to that
with screws, no magic here :-)

Make sure you carefully adjust the motor down thrust (in manual flight)
as described in the manual.


reply via email to

[Prev in Thread] Current Thread [Next in Thread]