paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Funjet


From: Martin Mueller
Subject: Re: [Paparazzi-devel] Funjet
Date: Sat, 08 Sep 2007 11:09:14 +0200

Hi Matt,

It's a huge APC 9x6. This combination does not give you very high end speed 
(small prop/fast turning engine gives more) but it is very easy to launch and 
gives you thrust even if the ac is slow.

Martin

> -----Urspr√ľngliche Nachricht-----
> Von: address@hidden
> Gesendet: 05.09.07 04:51:10
> An: address@hidden
> Betreff: Re: [Paparazzi-devel] Funjet

Martin,
> 
> 
>   Thanks.  I have seen some pretty unique methods to mount outrunners
> on the FunJet =)  Tell me, what type of prop do you use?  A speed prop,
> slow flyer?  Placing the order for the AXI & Prop this evening. 
> Thanks.
> 
> 
> Regards,
> Matthew
> 
> address@hidden wrote:
>  Hi Matt,
>  
>  
>  Could you send a photo or explain how you mounted the brushless
>  
>  
>  outrunner to the
>  
>  
>  FunJET if there are any special considerations? You use the 2216/26
>  
>  
>  correct?
> The Funjet comes with a plastic motor holder, the Axi is mounted to that
> with screws, no magic here :-)
> Make sure you carefully adjust the motor down thrust (in manual flight)
> as described in the manual.
> Martin
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>  
> 
> -----------------------------------------------------------------
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 


_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066





reply via email to

[Prev in Thread] Current Thread [Next in Thread]