Many components were changed on tiny 2, especially those relating to the power supply (coils, tantalum, etc).
You will no longer need some components and you will need to order new components like the PTH08080 switch mode PS module.
-yvest
> Date: Thu, 7 Feb 2008 19:14:31 +0400
> From: address@hidden
> To: address@hidden
> Subject: [Paparazzi-devel] Tiny 1 Schematic
>
> Dear all,
>
> Before Tiny2 was out I have ordered parts for Tiny1, and to reduce the cost I am redesigning it to 2 layers. And also here in my town no one can do a 4 layer. I used the schematic from the wiki but I could not find these parts in it and I do not know how to do their connections.
>
> diode shotkey
> cap 220pF
> res 3.3k
> cap tant 330uf
> capacitor tant 10uf
> cap gold en 0.2f 3.3v
> cap tant 47uF
> cap tantalum 22uF
> cap 22000 pF
> pulse drum core
> lqm21nnr47k10d...... 0.47uH
> antenna and GPS
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
|