paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] bootloader problem in Tiny13


From: akochevar
Subject: RE: [Paparazzi-devel] bootloader problem in Tiny13
Date: Mon, 21 Apr 2008 17:16:15 -0700
User-agent: Web-Based Email 4.12.31

Tom,
do you still have the USB cable plugged in?  its possible that the board reboot, sees the reset pin being driven high, and goes back into programming mode.  unplug the programmer and reset the power and it should boot.  The flash is not gone, the board is just starting in programming mode.  Once you program it will start, which is why it remains running once you flash.
 
AJ

-------- Original Message --------
Subject: [Paparazzi-devel] bootloader problem in Tiny13
From: "Tom Apker" <address@hidden>
Date: Mon, April 21, 2008 3:19 pm
To: address@hidden

Hello everybody,

I have a Tiny13 board that will not start its flashed program
after I power it off and then power it back on. I did use the
bootloader the first time I programmed it, and tried to reload the
bootloader. I got this output:

ioctl get failed
ioctl get failed
ioctl set ok, status = 186A4
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A0
ioctl get failed
Synchronizing. OK
Read bootcode version: 2.12.0
Read part ID: LPC2148, 512 kiB ROM / 40 kiB SRAM (67305253)
Sector 0: ...............................................................................................
Sector 1: ...........................................................................
Download Finished... taking 7 seconds
Now launching the brand new code
ioctl get failed
ioctl set ok, status = 2
ioctl get failed
ioctl get failed
ioctl set ok, status = 186A0
ioctl get failed

It appears to run just fine if I power up, program, and go. However,
I cannot power up, program, shut down, and power up properly a second
time. I don't think I let the smoke out of the board, but I can't see
any reason why it doesn't work on a restart.

Any help would be appreciated.

Many thanks,

Tom


_______________________________________________
Paparazzi-devel mailing list
Paparazzi-devel@nongnu.org
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]