[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: [Paparazzi-devel] No throttle in Auto2

From: Martin Mueller
Subject: Re: Re: [Paparazzi-devel] No throttle in Auto2
Date: Fri, 22 Aug 2008 00:29:41 +0200

> I added the datalink section from the previous email to the airframe
> config, but it didn't make a difference. I still have communication
> from the plane, but not able to send.  On the groundstation modem, the
> tx light never lights up. The rx light is flashing constantly. I moved
> all the waypoints, so I would expect the groundstation to try to send
> that data to the airplane, but it seems to send nothing. I am using
> the Flight address@hidden session for the GCS.

maybe you can try the XBee protocol by commenting that in:

> -DUART1_BAUD=B9600
> #ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c xbee.c

and the transparent out:

> ap.srcs += downlink.c $(SRC_ARCH)/uart_hw.c datalink.c pprz_transport.c

Schon gehört? Bei WEB.DE gibt' s viele kostenlose Spiele:

reply via email to

[Prev in Thread] Current Thread [Next in Thread]