paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] What will I need?


From: cory barton
Subject: Re: [Paparazzi-devel] What will I need?
Date: Fri, 22 Aug 2008 09:37:14 -0400

The tinyv2 comes with the gps reciever, so you do not need to order a
separate receiver.

Cory

On Fri, Aug 22, 2008 at 5:03 AM, Electro-Technik <address@hidden> wrote:
> Cory,
>
> Many thanks for your input.  I agree that it is a difficult question to
> answer.  At this stage I know nothing, and need to learn what is possible,
> and at what cost.  As a starting point I have ordered the equipment you
> listed along with a GPS receiver.
>
> Thanks again.
>
> Regards A.K. in the UK
>
>
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden On Behalf Of
> cory barton
> Sent: 21 August 2008 18:46
> To: address@hidden
> Subject: Re: [Paparazzi-devel] What will I need?
>
>
> That is a hard request to satisfy, since it depends on what you want to do.
>
> I can give you a example of what I have.
> Aircraft, servos, Futaba RC receiver and transmitter (72Mhz)
>
> Ap: tinyv2
> Horizontal IR sensor
> Vertical IR sensor
> Rate gyro
>
> Modems:
> 2.4ghz xbee pro oem with whip antenna (for plane)
> 2.4ghz xbee pro usb for groundstation
>
> You will also need the picoblade connectors, and precrimped cables.
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]