RE: [Paparazzi-devel] 2S battery

[akochevar]

Definitely not!

 

-------- Original Message --------
Subject: Re: [Paparazzi-devel] 2S battery
From: "Mohit Mundhra" <address@hidden>
Date: Mon, September 01, 2008 9:34 am
To: address@hidden

Can I connect the V+ from the battery directly to the ADC port on the Tiny ?

On Mon, Sep 1, 2008 at 9:54 PM, <address@hidden> wrote:
> just change your CATASTROPHIC battery detect in your airframe to something
> like 6.5V and it wont cut the throttle, then you shouldnt need to add
> anything. I fly with a 2 cell battery with no issues.
>
> AJ
>
> -------- Original Message --------
> Subject: [Paparazzi-devel] 2S battery
> From: "Mohit Mundhra" <address@hidden>
> Date: Mon, September 01, 2008 2:56 am
> To: address@hidden
>
> I need to connect the 2S battery for monitoring in the tiny 1.1 . Can
> i straightaway connect one wire from the V+ of the battery to one of
> the ADC points on tiny board? Which ADC_ should I connect it to? What
> other settings do I need to make in the configuration files for it to
> correctly monitor the battery status?
>
> Currently I havent connected the battery to the board and when I
> switch it to Auto 2, it cuts the throttle which is OK as it is
> detecting it as low battery. Do let me know what all I have to do.
>
>
> --
> Mohit Mundhra
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>



--
Mohit Mundhra
--~--~---------~--~----~------------~-------~--~----~
Aurora Integrated Systems
-~----------~----~----~----~------~----~------~--~---


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel