[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] TWOG - no answer on '?'

From: Chen
Subject: RE: [Paparazzi-devel] TWOG - no answer on '?'
Date: Tue, 7 Oct 2008 12:21:24 +0100

Hi there


  Sometimes this happened to me as well, even though I am not using TWOG, one way I found it work is by disconnect the power and reconnect it again, try it, see if it works








From: address@hidden [mailto:address@hidden On Behalf Of Mohit Mundhra
Sent: Tuesday, October 07, 2008 12:14 PM
To: address@hidden
Subject: [Paparazzi-devel] TWOG - no answer on '?'


when I try to upload the usb bootloader onto the TWOG board, it is giving me this message.
Even when I tried to upload the code using the ISP flash mode, it is giving 'no answer on '?' ' message. Is the board working fine? What can be the probable problem. This is a new TWOG board which I got from PPZUAV. I have checked the 3.3 and 5 V rail. The voltages are fine on them.

ioctl set ok, status = 6
ioctl get ok, status = 6
ioctl get ok, status = 6
ioctl set ok, status = 4
ioctl get ok, status = 4
ioctl get ok, status = 4
ioctl set ok, status = 0
ioctl get ok, status = 0
 no answer on '?'
make: *** [upload_bl] Error 4

Mohit Mundhra
Aurora Integrated Systems

reply via email to

[Prev in Thread] Current Thread [Next in Thread]