paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Safety-Switch


From: Marcus Wolschon
Subject: Re: [Paparazzi-devel] Safety-Switch
Date: Mon, 13 Oct 2008 10:51:46 +0200

Thanks for the answers.
The first board looks very interesting. However I am not able
to etch my own circuit-boards here. :(

The rxmux would do everything I need but it looks
quite big (>5x5cm) and a price of $80+transatlantic shipping
+customs +tax is way too much for just an rc-controlled
switch.

Marcus


2008/10/13, Zik Saleeba <address@hidden>:
> The Rx-Mux is popular:
> http://www.acroname.com/robotics/parts/R306-RXMUX.html
>
> Cheers,
> Zik
>
> On Sun, Oct 12, 2008 at 11:48 PM, Marcus Wolschon
> <address@hidden>wrote:
>
>> Hello,
>>
>> I am getting to the point where I can prepare first test-flights for my
>> autopilot running a modified paparazzi (same software, very different
>> board).
>> Now, I am looking for a way to switch the servo-inputs between
>> the RC-receiver and the board-computer.
>>
>> Requirements:
>> * absolutely reliable, no compromises here
>> * leightweight
>> * very small
>>
>> I am currently thinking of conneting
>> a ready-made rc-switch that can switch
>> a 5v-line on and off with 3 5V-multiplexers.
>>
>> Can anyone recommend something here?
>>
>> Marcus
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]