paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Paparazzi-devel] Route PPM back to RC receiver on tiny2_1_1


From: mark.griffin
Subject: RE: [Paparazzi-devel] Route PPM back to RC receiver on tiny2_1_1
Date: Mon, 23 Feb 2009 09:08:48 +0100

Hey Andre,
If you want to directly drive a receiver which has a microcontroller
that does the decoding and driving of the servos (not a 4015 or 4017
decoder chip), then you need to use the "servos_ppm_hw.h" file. 
There is some recent info on the Wiki at:
http://paparazzi.enac.fr/wiki/Airframe_Configuration#Radio_Control
Hope this helps.
Cheers, Mark

-----Original Message-----
From: address@hidden
[mailto:address@hidden On
Behalf Of antoine drouin
Sent: Sunday, 22 February 2009 3:07 AM
To: address@hidden
Subject: Re: [Paparazzi-devel] Route PPM back to RC receiver on
tiny2_1_1

Hi Andre

servo_direct is not meant for that. It's meant to produce a ready to use
servo pulse ( 1-2m/s high , period 25ms) using the PWM hardware of the
LPC What you want is really servo_4017 or servo_4015 depending on the
driver in your receiver and configure that code for the wiring of the
tiny you're using.


Regards

Poine

On Sat, Feb 21, 2009 at 10:16 PM, Devitt, Andre <address@hidden>
wrote:
>
> Is the code to route the ppm signal back to an rc reciever through 
> srv_clk and srv_rst functional on a tiny2. I'd like to be able to plug

> the servos directly into the reciever. I've modified my hardware 
> appropriately but don't seem to be getting any signal out of srv_clk
and srv_rst.
>
> Some of the instructions on wiki seem dated and they don't work. I do 
> get different function with servos_direct_hw.h/c but I'm not sure what

> compile time defines are necessary or any other configuration
settings.
>
> Thanks,
>    Andre
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>


_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel






reply via email to

[Prev in Thread] Current Thread [Next in Thread]