paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE: RE: [Paparazz =?ISO-8859-1?Q?i-devel] intersemabar?= ometric sen


From: martin
Subject: Re: RE: RE: [Paparazz =?ISO-8859-1?Q?i-devel] intersemabar?= ometric sensor and sh t humidity sensor
Date: Tue, 28 Apr 2009 22:43:58 +0200 (CEST)

Hi Cedric,

the measured SHT value is sent by main_ap.c as it is available, it is
not put into the telemetry file.

Martin

Am 28.04.2009 um  Uhr haben Sie geschrieben:
> Thank you for your help Martin. I didn't realise that there was an
airplane
> file with the sht sensor (funjetfi8). I replaced my plane with the
later and
>
> I still have the same compilation error :
>
> main_ap.c :240 warning implicit declaration of function
> "PERIODIC_SEND_SHT_STATUS"
> main_ap.c :240 nested extern declaration of function
> "PERIODIC_SEND_SHT_STATUS"
> ...
> ...
> Main_ap.c:(.text+0x2ad0):undefined reference to
"PERIODIC_SEND_SHT_STATUS"
> Etc.
>
> So I now suspect my telemetry file to be wrong (and as far as I know
there
> is no example with the sht sensor).
> I added the following :
>
> <message name="SHT_STATUS" period=2.0/>
>
> That must be the problem. What should I replace it with ?
>
> Thanks in advance
>
> Cédric
>
>
> There should be no need to modify software. Did you start with an
> aircraft file that does have the sht/ms code and defines, e.g.
> funjetgfi8/microjet6?
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>





reply via email to

[Prev in Thread] Current Thread [Next in Thread]